1. Pengenalan
This manual provides instructions for the safe and effective operation, maintenance, and troubleshooting of the FLYLINKTECH 1500A Peak 20000mAh Car Jump Starter. Please read this manual thoroughly before using the product and retain it for future reference.
Image 1.1: FLYLINKTECH Car Jump Starter unit, smart clamps, charging cables, and storage case.
2. Produk Lebihview
2.1 Kandungan Pakej
- FLYLINKTECH 1500A Peak 20000mAh Car Jump Starter Unit
- Intelligent Jumper Clamps
- Kabel Pengecas USB
- Kabel Pengecasan Jenis-C
- Manual Pengguna
- Sarung Penyimpanan
Image 2.1: Visual representation of the product package contents.
2.2 Ciri-ciri Utama
- Kapasiti Tinggi: 20000mAh battery for multiple jump starts and device charging.
- Permulaan Lompatan yang Berkuasa: 1500A peak current capable of starting 12V vehicles (all petrol engines or up to 7.0L diesel engines).
- Power Bank pelbagai fungsi: Two Quick Charge 3.0 USB outputs (5V/3A, 9V/2A) for charging smartphones, tablets, and other USB-powered devices.
- Lampu Suluh LED Kecemasan: Features Normal, SOS, and Strobe lighting modes.
- Penilaian Kalis Air IP68: Provides protection against water and dust ingress.
- Sistem Perlindungan Pintar: Integrated intelligent clamps offer protection against over-discharge, short circuit, overload, overcurrent, reverse protection, over temperature, reverse polarity, and reverse connection.
2.3 Product Components and Controls
Imej 2.2: Selesaiview of the jump starter's buttons, ports, and indicators.
- ON/OFF Button (Multifunctional): Powers the unit on/off and controls flashlight modes.
- Lampu Penunjuk Pengecasan: Four blue LEDs indicate the battery charge level.
- Output 1, QC3.0: USB-A port for quick charging external devices.
- Output 2, QC3.0: USB-A port for quick charging external devices.
- Input Jenis C: Port USB-C untuk mengecas unit penghidup lompat.
- Input Mikro: Micro-USB port for charging the jump starter unit.
- Jump Starting Port: Dedicated port for connecting the intelligent jumper clamps.
- Lampu suluh: Lampu LED bersepadu.
3. Maklumat Keselamatan
Baca semua amaran dan arahan keselamatan sebelum menggunakan produk ini. Kegagalan mematuhi amaran dan arahan boleh mengakibatkan renjatan elektrik, kebakaran dan/atau kecederaan serius.
- Do not attempt to jump start a vehicle if the jump starter unit is below 50% charge.
- Ensure proper polarity when connecting the jumper clamps kepada bateri kenderaan. Kl merahamp to positive (+), Black clamp kepada negatif (-).
- Jangan sentuh cl merah dan hitamamps together once connected to the jump starter.
- Do not expose the product to extreme temperatures or direct sunlight for extended periods.
- Jauhkan daripada kanak-kanak.
- Do not disassemble, modify, or attempt to repair the unit.
- If the unit becomes excessively hot during use, discontinue use immediately.
- The intelligent clamps incorporate multiple protection features:
Imej 3.1: Selesaiview of the intelligent clamp's safety features.
- Perlindungan Lebihan Caj
- Perlindungan Litar pintas
- Perlindungan Lebihan
- Perlindungan Arus Lebih
- Perlindungan Terbalik
- Lebih Perlindungan Suhu
- Perlindungan Polariti Terbalik
- Perlindungan Sambungan Terbalik
4. Persediaan
4.1 Mengecas Pemula Lompat
Before first use, fully charge the jump starter unit. It is recommended to charge the unit every 3-6 months to maintain battery health, even if not in use.
- Connect the provided USB or Type-C charging cable to the corresponding input port on the jump starter unit.
- Connect the other end of the charging cable to a USB wall adapter (not included) or a powered USB port.
- The charging indicator lights will illuminate and flash to show the charging progress. All four lights will be solid when fully charged.
5. Arahan Operasi
5.1 Lompat Memulakan Kenderaan
Ensure the jump starter unit has at least 50% charge before attempting to jump start a vehicle.
Image 5.1: The jump starter is suitable for various 12V vehicles, including cars, SUVs, vans, pickup trucks, motorcycles, and more.
- Matikan pencucuh kenderaan dan semua aksesori.
- Connect the blue plug of the intelligent jumper clamps into the jump starting port on the jump starter unit. Ensure a firm connection.
- Sambungkan merah (+) clamp ke terminal positif bateri kenderaan.
- Sambungkan hitam (-) clamp ke terminal negatif bateri kenderaan.
- Sebaik sahaja clamps are correctly connected, the indicator light on the intelligent clamps will turn green, indicating it is safe to proceed. If it shows red or flashes, check connections and refer to the troubleshooting section.
- Hidupkan enjin kenderaan.
- Sebaik sahaja kenderaan dihidupkan, putuskan sambungan dengan segera hitam (-) clamp daripada bateri kenderaan, diikuti oleh merah (+) clamp.
- Disconnect the intelligent jumper clamps daripada unit pemula lompat.
Image 5.2: Proper connection of jumper clamps to a vehicle battery.
5.2 Mengecas Peranti Luaran
The jump starter can function as a power bank to charge various USB-powered devices.
Image 5.3: The jump starter can charge devices like phones, tablets, and cameras.
- Connect your device's USB charging cable to one of the Quick Charge 3.0 USB output ports (Output 1 or Output 2) on the jump starter unit.
- Sambungkan hujung kabel yang lain ke peranti anda.
- The jump starter will automatically begin charging your device. The charging indicator lights will show the remaining battery level.
5.3 Menggunakan Lampu Suluh LED
The integrated LED flashlight offers multiple lighting modes for emergency situations or general illumination.
Image 5.4: The LED flashlight offers Normal, SOS, and Strobe modes.
- Press and hold the ON/OFF button for approximately 3 seconds to turn on the flashlight in Normal mode.
- Press the ON/OFF button briefly to cycle through the modes: Normal > SOS > Strobe > Off.
- To turn off the flashlight from any mode, press and hold the ON/OFF button for approximately 3 seconds.
6. Penyelenggaraan
- mengecas: Recharge the jump starter unit every 3-6 months, even if not used, to prolong battery life.
- Pembersihan: Lap unit dengan kain lembut dan kering. Jangan gunakan bahan kimia yang keras atau pembersih yang kasar.
- Storan: Store the jump starter in its provided storage case in a cool, dry place, away from direct sunlight and extreme temperatures.
- Penjagaan Bateri: Avoid fully discharging the unit frequently, as this can reduce battery lifespan.
7. Penyelesaian masalah
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Pemula lompat tidak dihidupkan. | Bateri habis sepenuhnya. | Charge the jump starter unit. |
| Vehicle does not start after jump starting attempt. | cl yang salahamp sambungan. Bateri pemula lompat terlalu rendah. Vehicle battery severely damaged. Masalah kenderaan yang tidak berkaitan dengan bateri. | Periksa clamp connections (red to +, black to -). Ensure jump starter is sufficiently charged (above 50%). Consult a mechanic if the issue persists. |
| Pintar clamp indicator light is red or flashing. | Kekutuban songsang, litar pintas atau perlindungan lain diaktifkan. | Putuskan sambungan clamps from vehicle battery and jump starter. Re-check connections for correct polarity and ensure clamps are not touching. Refer to safety information. |
| Peranti luaran tidak dicas. | Bateri pemula lompat terlalu rendah. Sambungan kabel tidak betul. Peranti tidak serasi. | Charge the jump starter. Ensure USB cable is properly connected to both the jump starter and the device. Try a different USB port or cable. |
Jika masalah berterusan selepas mencuba penyelesaian ini, sila hubungi sokongan pelanggan.
8. Spesifikasi
| Ciri | Spesifikasi |
|---|---|
| Model | CF100 |
| Kapasiti Bateri | 20000mAh |
| Arus Puncak | 1500A |
| Mula Semasa | 750A |
| Keserasian Kenderaan | 12V vehicles (All Petrol, up to 7.0L Diesel) |
| Output USB 1 (QC3.0) | 5V/3A, 9V/2A |
| Output USB 2 (QC3.0) | 5V/3A, 9V/2A |
| Input USB-C | 5V/2A |
| Input Mikro-USB | 5V/2A |
| Penilaian Kalis Air | IP68 |
| Mod Lampu Suluh LED | Normal, SOS, Strobe |
| Jenis Bateri | Litium Ion |
| Dimensi Produk (lebih kurang) | 183mm x 88mm x 36mm |
| Berat Barang | 544g |
| Sijil Keselamatan | CE, FCC, RoHs, UL, UN38.3 |
9. Waranti dan Sokongan
9.1 Maklumat Waranti
This FLYLINKTECH product comes with a Waranti 24 bulan dari tarikh pembelian. Waranti ini meliputi kecacatan pembuatan dan isu-isu yang timbul daripada penggunaan biasa.
9.2 Sokongan Pelanggan
If you have any questions, encounter problems during use, or require technical assistance, please contact our professional technical team. You can reach us through the Amazon purchase message system.
Our support team aims to respond and help resolve issues within 24 hours.
