1. Produk Lebihview
The Beta 1972/18 is an ultra-compact 18V brushless impact driver designed for professional use. It features a digital motor for enhanced performance, offering more power, reduced consumption, and precise power dosage.
- Motor Digital tanpa berus: Provides increased power and efficiency.
- Tork Tinggi: Up to 75 Nm for demanding applications.
- Kelajuan berubah: Up to 2100 RPM for versatile drilling and driving.
- LED Front Lighting: Menerangi kawasan kerja untuk penglihatan yang lebih baik.
- Perlindungan Bateri: Triple battery self-protection against overload and cell power differences.
Figure 1.1: The Beta 1972/18 Impact Driver, showcasinreka bentuk yang padat dan pemegang ergonomiknya.
2. Komponen yang Disertakan
Your Beta 1972/18 Impact Driver package includes the following items:
- Beta 1972/18 Impact Driver
- 2 x 5Ah Bateri Litium-Ion
- Quick Charger (80 minutes charging time)
- Hard Case for storage and transport
- Belt Clip (right/left mountable)
Figure 2.1: All components of the Beta 1972/18 kit neatly organized within the durable hard case.
3. Persediaan dan Pemasangan
3.1 Mengecas Bateri
- Connect the quick charger to a suitable power outlet.
- Slide the 5Ah Lithium-Ion battery onto the charger until it clicks into place.
- Berikan masa kira-kira 80 minit untuk cas penuh. Pengecas akan menunjukkan apabila pengecasan selesai.
- Setelah dicas, keluarkan bateri daripada pengecas.
3.2 Memasang Bateri
- Align the charged battery with the base of the impact driver.
- Slide the battery firmly into the tool until it locks securely.
- To remove, press the battery release buttons on the sides and slide the battery out.
3.3 Memasang Klip Tali Pinggang
The belt clip can be attached to either the right or left side of the tool for convenient carrying.
- Locate the screw hole on the side of the tool where you wish to attach the clip.
- Align the belt clip with the hole and secure it with the provided screw.
4. Arahan Operasi
4.1 Menghidupkan/Mematikan dan Kawalan Kelajuan
- To power on the tool, press the trigger switch. The LED front light will illuminate.
- To power off, release the trigger switch.
- The tool features a variable speed trigger. Pressing the trigger further increases the speed up to 2100 RPM.
- Use the speed selector switch (if present, typically near the chuck) to choose between two speed ranges for different applications.
4.2 Pelarasan Tork
The torque collar allows you to adjust the amount of torque applied, preventing overtightening or stripping screws. Rotate the collar to select the desired torque setting, up to 75 Nm.
4.3 Penggerudian dan Pemanduan
- Insert the appropriate drill bit or driver bit into the chuck. Tighten the chuck securely.
- Select the desired speed and torque setting.
- Letakkan alat dengan kukuh pada bahan kerja.
- Press the trigger to begin drilling or driving. Apply steady, even pressure.
- For drilling into steel, the maximum recommended diameter is 13 mm. For wood, it is 45 mm.
Figure 4.1: Demonstrating the Beta 1972/18 in action, drilling into a wooden surface.
Figure 4.2: The compact design allows for use in confined spaces, such as under a car hood.
5. Penyelenggaraan
5.1 Pembersihan
- Sentiasa putuskan sambungan bateri sebelum membersihkan.
- Lap alat dengan bersih, damp kain. Jangan gunakan bahan kimia yang keras atau pembersih yang kasar.
- Keep ventilation openings clear of dust and debris. Use compressed air if necessary.
5.2 Penjagaan dan Penyimpanan Bateri
- Simpan bateri di tempat yang sejuk dan kering jauh dari cahaya matahari langsung dan suhu yang melampau.
- Untuk penyimpanan jangka panjang, cas bateri kepada kapasiti kira-kira 50%.
- Do not store batteries in a discharged state to prevent damage.
5.3 Penyelenggaraan Am
- Regularly inspect the chuck for wear and tear.
- Check the power cord of the charger for any damage.
- Ensure all screws and fasteners on the tool are tight.
6. Penyelesaian masalah
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Alat tidak bermula | Bateri tidak dicas atau tidak dimasukkan dengan betul. | Pastikan bateri dicas sepenuhnya dan dimasukkan dengan selamat. |
| Mengurangkan kuasa/prestasi | Bateri lemah atau alat terlebih beban. | Cas semula bateri. Kurangkan beban pada alat tersebut. |
| Bateri tidak dicas | Charger not connected, faulty battery, or extreme temperature. | Check charger connection. Allow battery to reach room temperature. Contact support if issue persists. |
| Getaran atau bunyi yang berlebihan | Loose bit, damaged chuck, or internal issue. | Ensure bit is securely fastened. Inspect chuck for damage. If problem persists, seek professional service. |
7. Spesifikasi
| Ciri | Perincian |
|---|---|
| Pengeluar | Beta |
| Nombor Bahagian | 019720018 |
| Nombor Model Item | Beta 1972/18 |
| Sumber Kuasa | Electric (Battery) |
| Voltage | 18 Volt |
| Tork | 75 Meter Newton |
| Kelajuan | 2100 RPM (Maks) |
| Ciri Khas | Brushless Motor, Compact |
| Penggunaan | Profesional |
| Komponen yang Disertakan | 2 x 5Ah Li-ion batteries, Quick charger (80 min) |
| Jenis Sel Bateri | Litium Ion |
| Berat Barang | 5.88 kg |
| Dimensi Pakej | 46.5 x 36 x 14.5 cm |
| Tarikh Mula-mula Tersedia | 15 Jun 2019 |
8. Waranti dan Sokongan
The Beta 1972/18 Impact Driver comes with a Waranti 3 Tahun, memastikan ketenangan fikiran mengenai kualiti dan prestasinya.
Beta Tools is a leading company in Italy for the design and production of professional work tools. They maintain a strong presence with three production facilities in Italy, demonstrating their commitment to quality and customer satisfaction.
For technical assistance, warranty claims, or any product-related inquiries, please refer to the contact information provided in your product packaging or visit the official Beta Tools webtapak. Simpan resit pembelian anda sebagai bukti pembelian untuk tujuan jaminan.
Untuk maklumat lanjut, anda boleh melawati Beta Brand Page on Amazon.
