Manual Arahan Gergaji Miter Gelongsor Evolution Power Tools R185SMS+

1. Maklumat Keselamatan Penting

Sentiasa baca dan fahami semua amaran keselamatan, arahan, ilustrasi dan spesifikasi yang disediakan dengan alat kuasa ini. Kegagalan mematuhi semua arahan yang disenaraikan di bawah boleh mengakibatkan renjatan elektrik, kebakaran dan/atau kecederaan serius. Simpan semua amaran dan arahan untuk rujukan masa hadapan.

• Wear eye protection, hearing protection, and a dust mask.
• Pastikan bahan kerja berada dalam keadaan selamatamped sebelum dipotong.
• Keep hands clear of the blade area.
• Disconnect power before making adjustments or changing blades.
• Use only blades recommended for this tool and material.

2. Produk Lebihview

The Evolution R185SMS+ Sliding Miter Saw is designed for versatile cutting across various materials including steel, aluminum, wood (with embedded nails), plastic, and more. It features patented multi-material cutting technology, an optimized gearbox, and a blade system for extended motor and blade life.

Gambar 2.1: Lebihview of the Evolution R185SMS+ Sliding Miter Saw, showcasing its compact design and dust collection bag.

Ciri-ciri Utama:

• Multi-Material Cutting: Cuts steel, aluminum, wood with embedded nails, plastic, and more.
• Sudut boleh laras: 0-45 degree bevel capacity and 50-50 degree miter settings for diverse cuts.
• Motor berkuasa: 1500W optimized gearbox and blade system.
• Laser Cutting Guide: For enhanced accuracy.
• Aksesori yang disertakan: Premium TCT blade, carry handle, 3-piece clamp, dust collection bag.

Figure 2.2: Diagram illustrating the various materials the R185SMS+ can cut, including wood, composite decking, ferrous metals, non-ferrous metals, laminates, and plastics.

3. Persediaan

3.1 Membongkar dan Memasang

Carefully remove all components from the packaging. Inspect for any damage. The saw comes partially disassembled for compact packaging. Follow the included assembly instructions to attach the power head to the slider tubes and secure the base. Ensure all locking pins and fasteners are correctly engaged and tightened before use.

3.2 Pemasangan Bilah

1. Pastikan gergaji dicabut dari sumber kuasa.
2. Tekan butang kunci gelendong untuk memasang bilah dengan kukuh.
3. Gunakan sepana yang disediakan untuk melonggarkan bolt bilah.
4. Tanggalkan bebibir luar dan bilah lama.
5. Install the new blade, ensuring the rotation arrow on the blade matches the arrow on the blade guard.
6. Replace the outer flange and tighten the blade bolt securely. Do not overtighten.

3.3 Adjusting Miter and Bevel Angles

The R185SMS+ allows for precise angle adjustments:

• Sudut Miter: Loosen the miter lock handle, rotate the turntable to the desired angle (up to 50 degrees left or right), and tighten the handle.
• Sudut Serong: Loosen the bevel lock knob, tilt the saw head to the desired angle (up to 45 degrees left), and tighten the knob.

Figure 3.1: Visual guide to maximum cutting capacities for various cut types: cross, miter, bevel, and compound.

4. Arahan Operasi

4.1 General Cutting Procedure

1. Place the workpiece firmly against the fence and secure it with the clamp.
2. Align the laser guide with your cut line.
3. Mulakan gergaji dan biarkan bilah mencapai kelajuan penuh.
4. Slowly lower the blade through the workpiece, maintaining a steady, controlled motion. For sliding cuts, push the saw head forward, lower the blade, and pull back through the material.
5. Setelah potongan selesai, lepaskan picu dan biarkan bilah berhenti sebelum mengangkat kepala gergaji.

Figure 4.1: An operator using the R185SMS+ miter saw, demonstrating proper stance and material handling. The saw is shown mounted on a compatible miter stand (sold separately).

4.2 Multi-Material Cutting Guidelines

The included TCT blade is designed for cutting various materials. When cutting different materials, observe the following:

• logam: Ensure the material is securely clamped. Cut at a consistent, moderate speed. Expect minimal sparks and burrs.
• kayu: The blade provides clean cuts in wood, even with embedded nails.
• plastik: Cut at a slower, controlled speed to prevent melting or chipping.

Rajah 4.2: Terperinci view of the R185SMS+ blade cutting through a metal angle bar, highlighting the clean cut achievable on ferrous metals.

Figure 4.3: Close-up of the saw blade making an accurate cut on a wooden plank, demonstrating precision for woodworking tasks.

Figure 4.4: An individual using the R185SMS+ to cut laminate flooring, illustrating its application in home improvement projects.

5. Penyelenggaraan

5.1 Pembersihan

Regularly clean the saw to ensure optimal performance and longevity. Disconnect the power before cleaning.

• Remove dust and debris from the motor vents using compressed air.
• Lap semua permukaan dengan iklanamp kain. Elakkan menggunakan bahan kimia yang keras.
• Empty the dust collection bag frequently.

5.2 Penjagaan Bilah

Inspect the blade before each use for sharpness and damage. A dull or damaged blade can cause kickback and poor cut quality. Replace blades as necessary.

6. Penyelesaian masalah

Isu dan Penyelesaian Biasa:

• Gergaji tidak bermula: Check power connection, ensure the safety switch is engaged, and inspect the power cord for damage.
• Potongan yang tidak tepat: Verify miter and bevel angle settings. Check if the blade is securely installed and not warped. Calibrate the laser guide if necessary.
• Excessive sparks/smoke during cutting: The blade may be dull or incorrect for the material. Reduce cutting speed.
• Blade wandering: Pastikan bahan kerja adalah clamped tightly. Check for blade damage or looseness.

For issues not listed here, contact Evolution Power Tools customer support.

7. Spesifikasi

8. Waranti dan Sokongan

8.1 Maklumat Waranti

This Evolution Power Tools R185SMS+ Sliding Miter Saw comes with a Waranti Pengilang Terhad 3 Tahun. Waranti ini melindungi kecacatan pada bahan dan mutu kerja di bawah penggunaan biasa. Sila simpan bukti pembelian anda untuk tuntutan waranti.

8.2 Sokongan Pelanggan

For technical assistance, warranty claims, or to order replacement parts, please contact Evolution Power Tools customer support:

• Webtapak: Visit the official Evolution Power Tools webtapak untuk sumber sokongan.
• telefon: Rujuk kepada pembungkusan produk anda atau pegawai rasmi webtapak untuk nombor hubungan serantau.