pengenalan
This manual provides detailed instructions for the installation, operation, and maintenance of your Puig V-Tech Line Touring Windshield, model 1295F. This windshield is designed for specific Honda Forza models to enhance riding comfort and aerodynamics.
Please read these instructions thoroughly before proceeding with installation or use to ensure proper fitment and safe operation.
Maklumat Keselamatan
- Sentiasa pakai peralatan pelindung diri yang sesuai semasa pemasangan.
- Ensure the motorcycle is stable and turned off before beginning any work.
- Jika anda tidak pasti tentang mana-mana langkah, rujuk mekanik yang berkelayakan.
- Do not overtighten fasteners, as this may damage components.
- Regularly inspect the windshield and mounting hardware for security and wear.
Keserasian
This Puig V-Tech Line Touring Windshield (Model 1295F) is compatible with the following motorcycle models:
- Honda Forza 125: 2015, 2016, 2017, 2018, 2019, 2020
- Honda Forza 300: 2018, 2019, 2020
Note: Compatibility is crucial for proper fitment and performance. Verify your motorcycle's make, model, and year before installation.
Persediaan dan Pemasangan
The installation process typically involves removing the original windshield and mounting the new Puig windshield using the provided hardware. Specific steps may vary slightly depending on your motorcycle's exact configuration.
Alat yang Diperlukan (Tidak Termasuk):
- Screwdriver set (Phillips and/or flathead, as needed)
- Hex key set (Allen wrenches)
- Torque wrench (recommended for precise fastening)
- Kain lembut untuk melindungi permukaan
Langkah Pemasangan:
- Sediakan Motosikal: Park the motorcycle on a stable, level surface. Turn off the engine and remove the key.
- Remove Original Windshield: Carefully locate and remove the screws or fasteners securing the original windshield to the motorcycle. Keep track of all original hardware.
- Position the Puig Windshield: Align the Puig V-Tech Line Touring Windshield with the mounting points on your motorcycle.
- Pasang Perkakasan Pemasangan: Use the provided Puig hardware (if applicable) or the original hardware (if instructed) to secure the new windshield. Start all fasteners by hand to avoid cross-threading.
- Ketatkan Pengikat: Gradually tighten all fasteners evenly. If using a torque wrench, refer to your motorcycle's service manual for recommended torque specifications for windshield mounting bolts. Avoid overtightening.
- Pemeriksaan Akhir: Gently shake the windshield to ensure it is securely mounted and does not wobble. Check for any gaps or misalignments.
Image: Puig V-Tech Line Touring Windshield 1295F mounted on a Honda Forza motorcycle. This image illustrates the appearance of the dark smoked windshield after installation.
Operasi dan Penggunaan
The Puig V-Tech Line Touring Windshield is designed to improve aerodynamic protection and riding comfort. Once installed, no specific operational steps are required beyond regular motorcycle operation.
- Perlindungan yang Dipertingkatkan: The touring design offers increased wind and weather protection compared to standard windshields.
- Keterlihatan: The dark smoked tint provides a stylish appearance. Ensure visibility is not compromised, especially during low-light conditions.
Penjagaan dan Penyelenggaraan
Proper care will extend the life and maintain the clarity of your Puig windshield.
- Pembersihan: Bersihkan cermin depan dengan kerap dengan kain lembut dan sabun lembut serta air. Elakkan pembersih yang melelas, pelarut atau bahan kimia yang keras, kerana ini boleh merosakkan bahan akrilik.
- Pengeringan: Dry with a clean, soft microfiber cloth to prevent water spots and streaks.
- Pemeriksaan: Periodically check all mounting bolts and hardware for tightness. Vibrations from riding can sometimes loosen fasteners.
- Pencegahan calar: Avoid wiping the windshield when dry or with dirty cloths, as this can cause scratches.
Menyelesaikan masalah
If you encounter issues with your Puig V-Tech Line Touring Windshield, consider the following common solutions:
| Isu | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Windshield wobbles or vibrates | Bolt pemasangan longgar | Periksa dan ketatkan semua bolt pemasangan dengan selamat. |
| Excessive wind noise or buffeting | Incorrect installation or specific rider/motorcycle dynamics | Re-verify installation steps. Ensure all components are correctly aligned. Windshield performance can be subjective; minor adjustments to riding position may help. |
| Scratches or haziness on surface | Improper cleaning methods or abrasive contact | Use only soft cloths and mild soap for cleaning. Avoid dry wiping. Minor scratches may be polished with specialized acrylic polish. |
Spesifikasi
| Ciri | Perincian |
|---|---|
| model: | 1295F |
| Jenama: | puig |
| Bahan: | Akrilik |
| warna: | Dark Smoked |
| Berat Barang: | 2.03 paun (lebih kurang 0.92 kg) |
| Dimensi Produk: | 29.13 x 15.75 x 0.02 inci (lebih kurang 74 x 40 x 0.05 cm) |
| Ketebalan Item: | 4 Milimeter |
| Jenis Perkhidmatan Kenderaan: | Motosikal |
| jawatan: | Depan |
Waranti dan Sokongan
For information regarding product warranty, returns, or technical support, please contact Puig directly or the authorized retailer from whom you purchased this product.
Simpan bukti pembelian anda untuk sebarang tuntutan waranti.
Pengeluar: puig
Webtapak: www.puig.tv
