pengenalan
The Darkglass MicroTubes 500 V2 Bass Head is a powerful and versatile amplifier designed for bass players seeking exceptional tone and performance. This manual provides comprehensive instructions for setting up, operating, maintaining, and troubleshooting your amplifier to ensure optimal use and longevity.
It features 500 watts of all-analog power, a versatile 6-band graphic EQ, a VCA compressor, and three IR cabinet simulation presets, making it a complete tool for modern bass players.
Maklumat Keselamatan
Please read and understand all safety instructions before operating the MicroTubes 500 V2. Retain this manual for future reference.
- Bekalan Kuasa: Gunakan hanya kord kuasa yang ditentukan dan sambungkan ke alur keluar yang dibumikan. Pastikan voltage sepadan dengan ampkeperluan pengawas.
- Pengudaraan: Jangan sekat bukaan pengudaraan. Pastikan aliran udara yang mencukupi di sekeliling unit untuk mengelakkan terlalu panas.
- Kelembapan: Jangan dedahkan unit ini kepada hujan, kelembapan atau kelembapan berlebihan. Jauhkan cecair daripada amplebih hidup.
- Servis: Jangan cuba servis unit sendiri. Rujuk semua servis kepada kakitangan perkhidmatan yang berkelayakan.
- Sambungan Pembesar Suara: Sentiasa sambungkan amplifier to a speaker cabinet with the correct impedance before powering on. Incorrect impedance can damage the amplebih hidup.
- Perlindungan Pendengaran: Prolonged exposure to high volume levels can cause permanent hearing damage. Use caution when setting volume levels.
Ciri-ciri Utama
- Delivers 500 watts of all-analog power for dynamic and punchy bass tones.
- Features a versatile 6-band graphic EQ for precise tonal shaping and customization.
- Includes a VCA compressor for studio-quality dynamic control and sustain.
- Equipped with three IR cabinet simulation presets for lifelike direct performance.
- True bypass circuitry maintains signal integrity when the amp dilepaskan.
- Offers dual speaker outputs with 1/4-inch and speakON connectivity options.
- Send/return loop for easy integration of pedals and external effects processors.
- Passive/Active input mode selector to optimize performance for different bass pickups.
- Rear-panel XLR DI output for direct recording and connection to PA systems.
- Compact and lightweight design for easy transport and gigging convenience.
Kawalan dan Sambungan
Kawalan Panel Hadapan
Imej: Depan view of the Darkglass MicroTubes 500 V2 Bass Head, showing all knobs, buttons, and the graphic equalizer.
- Input: Standard 1/4" instrument input.
- Passive/Active Switch: Selects between passive and active input modes to accommodate different bass pickup outputs.
- Comp (Compressor): Mengawal jumlah mampatan yang dikenakan pada isyarat.
- Microtubes Engine Switch: Engages the Microtubes distortion circuit.
- VMT (Vintage Microtubes) Switch: Selects the Vintage Microtubes mode for a warmer, more organic overdrive.
- B3K (B3K Microtubes) Switch: Selects the B3K Microtubes mode for a more aggressive, modern distortion.
- memandu: Adjusts the amount of gain for the Microtubes Engine.
- Nada: Controls the character of the Microtubes Engine distortion.
- campuran: Mixes the clean signal with the Microtubes Engine signal.
- Tahap: Controls the overall output level of the Microtubes Engine.
- Graphic EQ: Six sliders for precise frequency shaping at 250 Hz, 500 Hz, 1.5 kHz, 3 kHz, and 5 kHz.
- Cikgu: Mengawal volum keluaran keseluruhan amplebih hidup.
Sambungan Panel Belakang
Imej: Belakang view of the Darkglass MicroTubes 500 V2 Bass Head, displaying all input and output jacks, including speaker outputs, effects loop, USB, and DI output.
- Speaker Output (Min. 2Ω): Dual outputs for connecting to speaker cabinets, supporting both speakON and 1/4" connections.
- Hantar/Pulangan: Effects loop for integrating external effects pedals and processors.
- Suis kaki: Input for an optional footswitch to control Microtubes Engine engagement.
- Aux In: 1/8" stereo input for connecting external audio devices (e.g., MP3 player) for practice.
- Fon kepala: 1/8" stereo output for silent practice.
- USB: USB-C port for connecting to a computer for firmware updates and Darkglass Suite software access (for IR loading and settings).
- Cab Select: Switch to cycle through the three onboard Impulse Response (IR) cabinet simulations.
- Tukar Pra/Pos: Menentukan sama ada isyarat output DI diambil sebelum (Pra) atau selepas (Post) yang amplifier's tone shaping and effects.
- Angkat GND: Ground lift switch to eliminate hum or ground loop noise.
- Keluaran DI: Balanced XLR output for direct connection to a mixing console or audio interface.
- Input Kuasa: Standard IEC power connector.
- Suis kuasa: Berpusing amphidup atau mati.
Persediaan
- Sambungan Kuasa: Connect the supplied power cord to the amplifier's power input and then to a grounded AC outlet.
- Sambungan Pembesar Suara: Connect your bass speaker cabinet(s) to the "Speaker Output" jacks on the rear panel. Ensure the total impedance of your cabinets is 2 ohms or higher. Use high-quality speaker cables.
- Sambungan Instrumen: Plug your bass guitar into the "Input" jack on the front panel. Select "Passive" or "Active" based on your bass's pickups.
- Sambungan Pilihan:
- For effects pedals, connect them to the "Send" and "Return" jacks.
- For direct recording or PA system connection, use the "DI Output" XLR jack. Adjust the "Pre/Post" switch as needed.
- For silent practice, connect headphones to the "Headphones" jack.
- To play along with music, connect an audio device to the "Aux In" jack.
- To manage IRs or update firmware, connect a USB-C cable to the "USB" port and your computer.
- Hidupkan kuasa: Ensure all connections are secure, then flip the "Power Switch" on the rear panel to the ON position.
Arahan Operasi
Operasi Asas
- Start with the "Master" volume knob at a low setting.
- Adjust the "Comp" knob to control the amount of compression. Higher settings provide more sustain and a more even dynamic response.
- Use the "Graphic EQ" sliders to shape your tone. Experiment with different frequencies to find your desired sound.
- Gradually increase the "Master" volume to your desired listening level.
Using the Microtubes Engine
The Microtubes Engine provides two distinct distortion modes:
- VMT (Vintage Microtubes): Engages a warm, organic overdrive reminiscent of classic tube amplifiers. Ideal for vintage rock and blues tones.
- B3K (B3K Microtubes): Engages a more aggressive, modern distortion with enhanced clarity and punch. Suitable for heavier genres.
To activate the Microtubes Engine, press the "Microtubes Engine" switch. Select your desired character using the "VMT" or "B3K" switches. Use the "Drive" knob to control the amount of distortion, "Tone" to adjust its character, and "Blend" to mix the distorted signal with your clean signal. The "Level" knob controls the output volume of the Microtubes Engine.
Cabinet Simulation (IRs)
The MicroTubes 500 V2 includes three onboard Impulse Response (IR) cabinet simulations. These can be accessed via the "DI Output" and "Headphones" output. Use the "Cab Select" switch on the rear panel to cycle through the available IRs. Additional IRs can be loaded and managed using the Darkglass Suite software via the USB connection.
Image: Screenshot of the Darkglass Suite software interface, showing options for selecting and managing cabinet impulse responses.
Penyelenggaraan
- Pembersihan: Gunakan kain lembut dan kering untuk membersihkannya amplifier's exterior. Do not use abrasive cleaners or solvents.
- Storan: Simpan amppenyangga di tempat yang sejuk dan kering jauh dari cahaya matahari langsung dan suhu yang melampau.
- Pengangkutan: When transporting the unit, ensure it is securely packed to prevent physical damage.
- Pengudaraan: Regularly check that the ventilation grilles are free from dust and debris.
Menyelesaikan masalah
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Tiada keluaran bunyi. |
|
|
| Distorted or weak sound. |
|
|
| Bunyi berdengung atau berdengung. |
|
|
Spesifikasi
| Atribut | Nilai |
|---|---|
| Nombor Model | M500V2 |
| Output Wattage | 500 Watt |
| Berat Barang | 7.37 paun |
| Dimensi Produk | 12.1 x 11.65 x 4.05 inci |
| Jenis Bahan | logam |
| warna | Hitam |
| Sumber Kuasa | Elektrik Bertali |
| Peranti Serasi | Gitar Bass |
| Jenis Penyambung | XLR, 1/4", speakON, USB-C |
Waranti dan Sokongan
Darkglass Electronics products are covered by a limited warranty. For detailed warranty information, product registration, and technical support, please visit the official Darkglass Electronics webtapak atau hubungi bahagian perkhidmatan pelanggan mereka.
Official Darkglass Electronics Webtapak: www.darkglass.com
