pengenalan
This manual provides comprehensive instructions for the setup, operation, and maintenance of your Suntek HC-550A 16MP Trail Camera. Please read this manual thoroughly before using the device to ensure proper functionality and to maximize its performance. The HC-550A is designed for outdoor surveillance, wildlife monitoring, and security applications, featuring a 16-megapixel camera, infrared night vision, and a 120-degree field of view.
Kandungan Pakej
Selepas membuka bungkusan, sila sahkan bahawa semua item ada dan dalam keadaan baik:
- Suntek HC-550A Trail Camera
- Tali Pemasangan
- Kabel USB
- Manual Pengguna (dokumen ini)
- (Optional, depending on retailer) SD Card
- (Optional, depending on retailer) Batteries
Produk Selesaiview

Rajah 1: Depan view of the Suntek HC-550A Trail Camera with the protective cover open. The image displays the internal LCD screen, the main camera lens, an array of infrared LEDs for night vision, and the Passive Infrared (PIR) motion sensor at the bottom. The camouflage casing is visible, along with the side latches for securing the cover.
The Suntek HC-550A features a robust, weather-resistant design suitable for outdoor use. Key components include:
- Main Camera Lens: Captures 16-megapixel photos and high-definition videos.
- Infrared (IR) LEDs: Provide illumination for night vision without startling wildlife.
- Sensor Gerakan PIR: Detects movement of warm bodies within its detection range to trigger recording.
- Skrin LCD: For menu navigation, settings adjustment, and playback of captured media.
- Butang Kawalan: Used to navigate the menu and change settings.
- Petak Bateri: Located inside, holds the required batteries.
- Slot Kad SD: Untuk sisipan kad memori.
- Titik Pemasangan: For securing the camera to a tree or post.
Persediaan
1. Pemasangan Bateri
- Open the camera's protective latches and swing open the front cover.
- Cari petak bateri.
- Insert 8 AA batteries (not included) according to the polarity markings (+/-) inside the compartment. Ensure all batteries are inserted correctly.
- Tutup penutup petak bateri dengan selamat.
2. Pemasangan Kad SD
- With the camera cover open, locate the SD card slot.
- Insert a Class 10 or higher SD card (up to 32GB recommended, not included) into the slot with the metal contacts facing down. Push until it clicks into place.
- To remove, push the SD card in again until it clicks, then release, and it will eject slightly.
3. Memasang Kamera
- Select a suitable location, such as a tree or post, that provides a clear view kawasan yang anda ingin pantau.
- Masukkan tali pelekap yang disediakan melalui slot di bahagian belakang kamera.
- Securely fasten the strap around the chosen object. Adjust the camera's angle as needed.
- Ensure the camera is stable and not prone to movement from wind or other environmental factors.
Arahan Operasi
1. Hidupkan/Mati Kuasa
- To power on, slide the power switch (usually located inside the camera, near the screen) from OFF to the TEST or ON position.
- In TEST mode, you can access the menu and view hidup footage.
- In ON mode, the camera will enter surveillance mode after a short countdown, indicated by a flashing LED.
- To power off, slide the switch to the OFF position.
2. Pemilihan Mod
The camera typically offers three modes:
- MATI: Camera is powered down.
- UJIAN: Allows access to the menu, settings, and manual photo/video capture. The screen is active.
- ON: Surveillance mode. The camera will automatically capture photos or videos when motion is detected, according to your settings. The screen will turn off after a few seconds.
3. Navigasi dan Tetapan Menu
In TEST mode, use the control buttons (e.g., MENU, UP, DOWN, LEFT, RIGHT, OK) to navigate the on-screen menu. Common settings include:
- Mod: Pilih Foto, Video atau Foto+Video.
- Saiz Foto: Set resolution (e.g., 16MP, 12MP, 8MP).
- Resolusi Video: Set resolution (e.g., 1080P, 720P).
- Sensitiviti PIR: Adjust motion sensor sensitivity (High, Medium, Low).
- Selang Pencetus: Tetapkan kelewatan antara pengesanan.
- Selang Masa: Enable time-lapse photography.
- Tarikh/Masa: Tetapkan tarikh dan masa semasa.
- Format Kad SD: Erase all data on the SD card.
4. Photo and Video Capture
Once the camera is in ON mode, it will automatically monitor the area. When the PIR sensor detects motion, the camera will activate and capture images or video clips based on your configured settings. The infrared LEDs will automatically engage in low-light conditions for night vision.
Penyelenggaraan
1. Pembersihan
- Regularly clean the camera lens and PIR sensor window with a soft, lint-free cloth to ensure clear images and accurate detection.
- Lap kamera casing dengan iklanamp cloth if it becomes dirty. Avoid using harsh chemicals or abrasive materials.
2. Penyimpanan
- When not in use for extended periods, remove the batteries to prevent leakage and damage.
- Simpan kamera di tempat yang sejuk dan kering, jauh daripada cahaya matahari langsung dan suhu yang melampau.
Menyelesaikan masalah
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Kamera tidak dihidupkan. | Bateri hampir habis atau tidak dimasukkan dengan betul. | Replace with fresh batteries and ensure correct polarity. |
| No photos/videos captured. | SD card full, not inserted, or corrupted; PIR sensitivity too low; camera in OFF mode. | Format or replace SD card; increase PIR sensitivity; ensure camera is in ON mode. |
| Kualiti imej/video yang lemah. | Kanta kotor; keadaan cahaya malap; tetapan resolusi yang salah. | Clean the lens; ensure adequate lighting or proper IR function; check resolution settings. |
| False triggers. | PIR sensitivity too high; camera facing moving branches or heat sources. | Decrease PIR sensitivity; reposition the camera to avoid obstructions. |
Spesifikasi
- model: Suntek HC-550A
- Penderia Imej: CMOS 16 Megapiksel
- Sudut Kanta: 120 darjah
- IR Vision: ya
- Jenis Kuasa: Battery powered (8x AA, 6 Volts)
- Nombor Rujukan: SH-10324
- ASIN: B07RK4MW9X
- Kuantiti: 1 unit
Waranti dan Sokongan
For warranty information and technical support, please refer to the documentation provided by your retailer or contact the manufacturer directly. Keep your purchase receipt as proof of purchase.





