Cudy LT300 4G LTE Wi-Fi Router User Manual

1. Pengenalan

The Cudy LT300 is a 4G LTE Wi-Fi Router designed to provide high-speed internet access using a cellular SIM card. It supports LTE download speeds of up to 150 Mbps and Wi-Fi speeds of up to 300 Mbps. This manual provides instructions for setting up, configuring, and maintaining your LT300 router.

2. Kandungan Pakej

Sila semak kandungan bungkusan dengan teliti. Jika terdapat sebarang barang yang hilang atau rosak, hubungi peruncit anda.

• Cudy LT300 4G LTE Wi-Fi Router
• Penyesuai Kuasa
• Kabel Ethernet
• Detachable LTE Antennas (x2)
• SIM Card Adapters (Nano to Micro, Nano to Standard)
• Panduan Pemasangan Pantas

3. Produk Lebihview

3.1. Komponen Perkakasan

Familiarize yourself with the ports, buttons, and LED indicators on your Cudy LT300 router.

Rajah 1: Depan view of the Cudy LT300 router, showing the power, Wi-Fi, LTE signal, and LAN/WAN LED indicators.

• LED kuasa: Menunjukkan status kuasa.
• LED Wi-Fi: Menunjukkan status Wi-Fi.
• LTE Signal LEDs: Indicate 4G LTE signal strength.
• LED LAN/WAN: Nyatakan aktiviti port Ethernet.

Rajah 2: belakang view of the Cudy LT300 router, displaying the power port, LAN/WAN ports, SIM card slot, and WPS/Reset button.

• Pelabuhan Kuasa: Sambungkan penyesuai kuasa yang disertakan.
• Port LAN/WAN: Gigabit Ethernet ports for wired connections. One port can function as WAN for wired internet.
• Slot Kad SIM: Masukkan kad SIM 4G LTE anda di sini.
• Butang WPS/Set Semula: Press for WPS function. Press and hold for 5-8 seconds to factory reset.
• Penyambung Antena: Connect the detachable LTE antennas.

4. Persediaan

4.1. Install LTE Antennas

Screw the two detachable LTE antennas into the connectors on the rear panel of the router. Ensure they are securely tightened and oriented vertically for optimal signal reception.

4.2. Masukkan Kad SIM

The Cudy LT300 uses a standard-sized SIM card. If your SIM card is Nano or Micro, use the provided SIM card adapters to fit it into the standard slot.

1. Pastikan penghala dimatikan.
2. Cari slot kad SIM pada panel belakang.
3. Insert the SIM card into the slot with the metal contacts facing down and the notched corner oriented correctly, as indicated on the router. Push until it clicks into place.
4. If removing, gently push the SIM card in again until it springs out.

Rajah 3: Illustration of inserting a SIM card into the Cudy LT300 router's SIM card slot.

4.3. Hidupkan kuasa

Connect the power adapter to the router's power port and then plug the other end into a power outlet. The Power LED will illuminate, and the router will begin to boot up. This process may take approximately 30-60 seconds.

5. Tatarajah

5.1. Mengakses ke Web Antara Muka Pengurusan

To configure your router, you need to access its webantara muka pengurusan berasaskan.

1. Connect your computer to the router via Wi-Fi (SSID and password are on the label at the bottom of the router) or an Ethernet cable.
2. Buka a web penyemak imbas (cth, Chrome, Firefox, Edge).
3. Taip alamat IP lalai 192.168.10.1 ke dalam bar alamat dan tekan Enter.
4. Enter the default login credentials. The default username is admin dan kata laluan lalai ialah admin (or as printed on the router label).
5. Follow the on-screen instructions for the initial setup wizard, if prompted. It is recommended to change the default login password for security.

5.2. Basic Wi-Fi Settings

Navigasi ke bahagian "Wayarles" atau "Tetapan Wi-Fi" dalam web interface to customize your wireless network.

• SSID (Nama Rangkaian): Change the default Wi-Fi network name to a unique name.
• Password (Security Key): Set a strong, secure password for your Wi-Fi network. WPA2-PSK AES is recommended.
• Mod Keselamatan: Select WPA2-PSK.

5.3. LTE/Internet Settings

The router should automatically detect your SIM card and configure the LTE connection. If not, you may need to manually configure the APN (Access Point Name) settings provided by your mobile operator.

1. Go to the "Network" or "LTE Settings" section.
2. Check the connection status. If "Disconnected" or "Limited," verify APN settings.
3. Select "Manual" APN configuration if automatic fails and enter the correct APN, username, and password from your mobile operator.
4. Save changes and reboot the router if prompted.

5.4. VoLTE Configuration

The Cudy LT300 supports VoLTE functionality. If your SIM card and mobile operator support VoLTE, you may find settings under "Voice" or "VoLTE" in the web interface to enable or configure this feature. Consult your mobile operator for specific VoLTE settings if required.

6. Beroperasi

6.1. Menghubungkan Peranti

• Wi-Fi: On your device (smartphone, tablet, laptop), search for the Wi-Fi network name (SSID) you configured and enter the Wi-Fi password.
• Ethernet: Connect an Ethernet cable from a LAN port on the router to the Ethernet port on your computer or other wired device.

6.2. Petunjuk LED

Monitor the LED indicators on the front panel to understand the router's status:

• LED kuasa: Solid Green (On), Off (Off).
• LED Wi-Fi: Solid Green (Wi-Fi On), Blinking (Data Transfer), Off (Wi-Fi Off).
• LTE Signal LEDs: Indicate signal strength (e.g., 3 bars for strong, 1 bar for weak).
• LED LAN/WAN: Solid Green (Connected), Blinking (Data Transfer), Off (No Connection).

7. Penyelenggaraan

7.1. Kemas Kini Perisian Tegar

Regularly check for and install firmware updates to ensure optimal performance and security. Firmware files can usually be downloaded from the Cudy official webtapak.

1. Muat turun perisian tegar terkini file for your LT300 model.
2. Akses ke web antara muka pengurusan.
3. Navigate to "System Tools" or "Firmware Upgrade."
4. Muat naik perisian tegar yang dimuat turun file dan ikut arahan pada skrin. Jangan matikan penghala semasa proses naik taraf.

7.2. Tetapan Semula Kilang

A factory reset will restore the router to its default settings. This can be useful for troubleshooting or if you forget your login password.

• With the router powered on, press and hold the WPS/Reset button on the rear panel for 5-8 seconds until the LEDs flash.
• Release the button. The router will reboot with factory default settings.

8. Penyelesaian masalah

• Tiada sambungan internet:
  • Check if the SIM card is inserted correctly and activated.
  • Verify LTE signal strength via the LED indicators.
  • Pastikan tetapan APN adalah betul dalam web antara muka.
  • Reboot the router and your connected devices.
• Tidak Boleh Akses Web Antara Muka Pengurusan:
  • Pastikan peranti anda disambungkan ke Wi-Fi penghala atau melalui Ethernet.
  • Verify the IP address 192.168.10.1 is typed correctly.
  • Cuba yang berbeza web pelayar.
  • Perform a factory reset if you forgot the login password.
• Kelajuan Wi-Fi Perlahan:
  • Check LTE signal strength; a weak signal will affect overall speed.
  • Pastikan penghala diletakkan di lokasi pusat, jauh daripada halangan dan gangguan.
  • Kurangkan bilangan peranti yang disambungkan atau aktiviti intensif lebar jalur.
  • Consider changing the Wi-Fi channel in the web antara muka.

9. Spesifikasi

10. Maklumat Keselamatan

• Do not expose the device to water or humidity.
• Jangan cuba membuka atau membaiki peranti sendiri.
• Gunakan hanya penyesuai kuasa yang disediakan.
• Jauhkan peranti daripada sumber haba dan cahaya matahari langsung.
• Pastikan pengudaraan yang betul di sekeliling peranti.

11. Waranti dan Sokongan

For warranty information and technical support, please refer to the warranty card included in the package or visit the official Cudy website. Support resources typically include FAQs, firmware downloads, and contact information.