Manual Pengguna Pengawal Monitor Padat Drawmer CMC2

1. Pengenalan

This manual provides comprehensive instructions for the setup, operation, and maintenance of your Drawmer CMC2 Compact Monitor Controller. Please read this manual thoroughly before using the device to ensure proper functionality and to maximize its performance.

2. Maklumat Keselamatan

• Bekalan Kuasa: Use only the factory-supplied 15V DC power supply. Using an incorrect power supply may damage the unit and void the warranty.
• Pengudaraan: Pastikan pengudaraan yang mencukupi di sekeliling unit. Jangan sekat bukaan pengudaraan.
• Kelembapan: Jangan dedahkan unit kepada hujan, lembapan atau kelembapan berlebihan.
• Pembersihan: Putuskan kuasa sebelum membersihkan. Gunakan kain yang kering dan lembut. Jangan gunakan pembersih cecair atau aerosol.
• Servis: Rujuk semua servis kepada kakitangan servis yang berkelayakan. Jangan cuba membuka atau membaiki unit itu sendiri.

3. Kandungan Pakej

Sahkan bahawa pakej anda mengandungi item berikut:

• Drawmer CMC2 Compact Monitor Controller
• 15V DC Power Supply Unit
• Manual Pengguna (dokumen ini)

4. Produk Lebihview

4.1 Kawalan Panel Hadapan

The front panel provides all primary controls for audio monitoring and source selection.

Rajah 4.1: Depan view of the Drawmer CMC2 Compact Monitor Controller, showing all knobs and buttons for input selection, speaker selection, master volume, headphone control, and mix check functions.

• AUX INPUT Knob: Adjusts the level of the auxiliary input.
• SOURCE SELECT Buttons (I/P1, I/P2, AUX): Selects the active audio input source.
• SPEAKER SELECT Buttons (A, B, SUB): Activates the selected speaker outputs.
• Tombol Kelantangan Utama: Controls the overall output level to the selected speakers.
• Butang MUTE: Mutes all speaker outputs.
• HEADPHONE Knob: Laraskan kelantangan untuk output fon kepala.
• MIX CHECK Buttons (ØREV, MONO, DIM): Provides phase reverse, mono sum, and dim functions for mix analysis.
• AUX INPUT (3.5mm Jack): Front panel auxiliary input for portable devices.
• HEADPHONE Output (6.35mm Jack): Front panel headphone output.

4.2 Sambungan Panel Belakang

The rear panel houses all audio input and output connectors, along with the power input.

Rajah 4.2: Belakang view of the Drawmer CMC2 Compact Monitor Controller, displaying the DC power input, speaker outputs (Mono/Sub, R-B-L, R-A-L), and inputs (R-2-L, R-1-L).

• DC=15V Input: Sambungkan penyesuai kuasa 15V DC yang dibekalkan di sini.
• Suis kuasa: Toggles the unit's power on/off.
• SPEAKER OUTPUTS (MONO/SUB, R-B-L, R-A-L): Balanced XLR outputs for connecting up to two pairs of stereo monitors (A and B) and a mono subwoofer.
• INPUTS (R-2-L, R-1-L): Balanced XLR inputs for two stereo audio sources.

5. Persediaan

Follow these steps to set up your CMC2 controller:

1. Sambungan Kuasa: Connect the supplied 15V DC power adapter to the 'DC=15V' input on the rear panel. Plug the adapter into a suitable power outlet. Do not power on the unit yet.
2. Sambungan Input:
   • Connect your primary audio source (e.g., audio interface, mixer) to the 'INPUTS R-1-L' using balanced XLR cables.
   • Connect a secondary audio source to the 'INPUTS R-2-L' using balanced XLR cables.
   • For portable devices, connect to the front panel 'AUX INPUT' (3.5mm jack) or the rear panel RCA auxiliary inputs (if available on your model, refer to specific product documentation).
3. Sambungan Pembesar Suara:
   • Connect your main studio monitors to the 'SPEAKER OUTPUTS R-A-L' using balanced XLR cables.
   • If using a second pair of monitors, connect them to 'SPEAKER OUTPUTS R-B-L'.
   • If using a subwoofer, connect it to the 'SPEAKER OUTPUTS MONO/SUB'.
4. Sambungan Fon Kepala: If desired, connect your headphones to the front panel 'HEADPHONE' 6.35mm jack.
5. Hidupkan kuasa: Once all connections are secure, press the power switch on the rear panel to turn on the CMC2.

6. Arahan Operasi

This section details the functions of the CMC2's controls.

Rajah 6.1: Jarak dekat view of the Drawmer CMC2 front panel, highlighting the master volume, source select, speaker select, headphone, and mix check controls.

6.1 Pemilihan Sumber

• Tekan ke I/P1 button to select the audio source connected to Input 1.
• Tekan ke I/P2 button to select the audio source connected to Input 2.
• Tekan ke AUX button to select the auxiliary input (front panel 3.5mm jack).
• Only one source can be active at a time. The LED next to the selected button will illuminate.

6.2 Speaker Selection

• Tekan ke A button to route the selected source to Speaker Output A.
• Tekan ke B button to route the selected source to Speaker Output B.
• Tekan ke SUB button to route the selected source to the Subwoofer Output.
• Multiple speaker outputs can be active simultaneously (e.g., A and SUB). The LEDs indicate active outputs.

6.3 Kawalan Kelantangan

• Putarkan yang besar VOLUME MASTER knob clockwise to increase the output level to the selected speakers, and counter-clockwise to decrease it.
• Putar Fon kepala knob to adjust the listening level for connected headphones.
• Putar INPUT AUX knob to adjust the input level of the auxiliary source.

6.4 Mix Check Functions

• Tekan ke ØREV button to reverse the phase of the right channel, useful for checking phase compatibility.
• Tekan ke MONO button to sum the stereo signal to mono, allowing you to check for mono compatibility issues in your mix.
• Tekan ke DIM button to temporarily reduce the output volume by a fixed amount, useful for quick listening level changes without losing your main volume setting.

6.5 Fungsi Redam

• Tekan ke HILANGKAN button to instantly silence all active speaker outputs. The LED will illuminate when mute is active. Press again to unmute.

7. Penyelenggaraan

The Drawmer CMC2 is designed for reliable operation with minimal maintenance.

• Pembersihan: Keep the unit clean by wiping it with a dry, soft, lint-free cloth. Avoid abrasive cleaners or solvents.
• Persekitaran: Operate the unit in a clean, dry environment, away from direct sunlight, heat sources, and excessive dust.
• Pengudaraan: Pastikan slot pengudaraan tidak tersumbat untuk mengelakkan pemanasan melampau.

8. Penyelesaian masalah

If you encounter issues with your CMC2, refer to the following common problems and solutions:

• Tiada Kuasa:
  • Ensure the 15V DC power adapter is securely connected to the unit and a working power outlet.
  • Check that the rear panel power switch is in the 'ON' position.
• Tiada Output Audio:
  • Verify that the correct input source (I/P1, I/P2, or AUX) is selected and its LED is illuminated.
  • Ensure that at least one speaker output (A, B, or SUB) is selected and its LED is illuminated.
  • Check that the MASTER VOLUME knob is turned up and the MUTE button is not active (LED off).
  • Confirm all audio cables are securely connected to both the CMC2 and your speakers/audio sources.
  • Test with different cables or audio sources to isolate the problem.
• Audio Herot:
  • Kurangkan tahap input daripada sumber audio anda.
  • Lower the MASTER VOLUME on the CMC2.
  • Periksa kabel audio yang rosak.
• Headphone Output Not Working:
  • Ensure headphones are fully plugged into the front panel jack.
  • Adjust the HEADPHONE volume knob.
  • Test with a different pair of headphones.

If the problem persists, contact Drawmer customer support or your authorized dealer for assistance.

9. Spesifikasi

10. Waranti dan Sokongan

The Drawmer CMC2 Compact Monitor Controller is covered by a manufacturer's warranty. Please refer to the warranty card included with your product or visit the official Drawmer webtapak untuk terma dan syarat jaminan terperinci.

For technical support, service, or further inquiries, please contact your authorized Drawmer dealer or the Drawmer customer support team through their official channels.