Manual Pengguna Pam Penggalak Tekanan Truper 13499 PRES-1/3T

1. Pengenalan

This manual provides essential information for the safe and efficient operation, installation, and maintenance of your Truper 13499 PRES-1/3T 1/3 HP Pressure Booster Pump. Please read these instructions carefully before installation and use to ensure proper function and to prevent damage or injury. Keep this manual for future reference.

2. Maklumat Keselamatan

Sentiasa patuhi langkah keselamatan berikut:

• Pastikan bekalan kuasa sepadan dengan voltan pamtage and frequency (127 V - 60 Hz).
• Putuskan sambungan kuasa sebelum melakukan sebarang penyelenggaraan atau pemasangan.
• Do not operate the pump with flammable liquids.
• Lindungi pam daripada suhu beku.
• Pemasangan harus dilakukan oleh profesional yang berkelayakan jika anda tidak pasti.
• Jauhkan kanak-kanak dan orang yang tidak dibenarkan daripada pam yang beroperasi.

3. Komponen Produk

The Truper 13499 PRES-1/3T Pressure Booster Pump includes the main pump unit, an integrated pressure switch, and power cord with an on/off switch. Refer to the image below for a visual representation of the pump and its key components.

Rajah 1: Truper 13499 PRES-1/3T Pressure Booster Pump. This image shows the complete pump assembly, including the orange motor housing, the dark gray pump body, brass fittings for water inlet and outlet, and the integrated flow switch with an arrow indicating water flow direction. The power cord with an inline on/off switch is also visible.

Komponen utama:

• Badan Pam: Dark gray cast iron housing for the impeller and water channels.
• Perumahan Motor: Orange casing protecting the electric motor.
• Inlet/Outlet Fittings: Brass threaded connections for plumbing.
• Suis Aliran: Orange component with an arrow, detecting water flow to activate the pump.
• Kord Kuasa: Electrical connection with an integrated on/off switch.

4. Persediaan dan Pemasangan

Pemasangan yang betul adalah penting untuk prestasi dan jangka hayat pam.

1. lokasi:
   • Pasang pam di kawasan yang kering, mempunyai pengudaraan yang baik, terlindung daripada cahaya matahari langsung, hujan dan suhu beku.
   • Ensure the pump is placed on a stable, level surface to minimize vibration.
   • Allow adequate space around the pump for ventilation and maintenance access.
2. Sambungan Paip:
   • Connect the pump to the water supply line using appropriate plumbing fittings. Ensure all connections are watertight.
   • Observe the flow direction indicated by the arrow on the flow switch (Figure 1). The pump must be installed in line with the water flow.
   • Use flexible connectors to reduce vibration transmission to the plumbing system.
   • Install shut-off valves on both the inlet and outlet sides of the pump for easier maintenance.
3. Sambungan Elektrik:
   • Ensure the power outlet is properly grounded and matches the pump's electrical requirements (127 V - 60 Hz).
   • Plug the pump's power cord into the grounded outlet.
   • Do not use extension cords unless absolutely necessary, and ensure they are rated for the pump's power requirements.
4. Menyuburkan Pam:
   • Before initial operation, ensure the pump is filled with water to prevent dry running. Open a faucet downstream to allow air to escape.
   • Once water flows steadily from the faucet, close it. The pump is now primed.

5. Arahan Operasi

The Truper 13499 PRES-1/3T pump operates automatically based on water flow.

1. Permulaan permulaan:
   • After installation and priming, ensure the inline switch on the power cord is in the "OFF" position.
   • Palamkan pam ke salur keluar elektrik yang sesuai.
   • Switch the inline power switch to the "ON" position. The pump will remain off until water flow is detected.
2. Operasi automatik:
   • When a water outlet (e.g., faucet, shower) is opened, the flow switch detects water movement.
   • The pump automatically starts, boosting water pressure.
   • When the water outlet is closed, the flow stops, and the pump automatically shuts off after a short delay.
3. Kitaran Tugas:
   • The pump is designed for intermittent use: 50 minutes of work followed by 20 minutes of rest.
   • The daily maximum operating time is 6 hours. Adhering to this duty cycle will prolong the pump's lifespan.

6. Penyelenggaraan

Penyelenggaraan tetap memastikan prestasi optimum dan memanjangkan hayat pam anda.

• Pembersihan: Periodically clean the exterior of the pump to prevent dust and debris buildup. Do not use harsh chemicals.
• Sambungan: Regularly check all plumbing and electrical connections for leaks or loose fittings. Tighten as necessary.
• Musim sejuk: If the pump is installed in an area subject to freezing temperatures, it must be drained and disconnected during winter months to prevent damage.
• Pemeriksaan: Periksa kord kuasa untuk sebarang tanda kerosakan atau haus. Gantikan jika perlu.

Warning: Always disconnect the pump from the power supply before performing any maintenance.

7. Penyelesaian masalah

This section addresses common issues you might encounter with your pressure booster pump.

8. Spesifikasi Teknikal

9. Waranti dan Sokongan

For warranty information or technical support, please refer to the documentation included with your purchase or contact Truper customer service. Keep your purchase receipt as proof of purchase.

For further assistance, visit the official Truper webtapak atau hubungi pusat perkhidmatan mereka yang dibenarkan.