Okin Okin Refined 2 Button Round Hand Control Handset

Okin Refined 2 Button Round Hand Control Handset User Manual

Model: Okin Refined 2 Button Round Hand Control Handset

Brand: Okin

1. Pengenalan

This manual provides comprehensive instructions for the Okin Refined 2 Button Round Hand Control Handset, designed for use with power recliners and lift chairs. This original Okin power recliner switch plugs directly into the actuator motor, offering reliable control for your furniture.

Ciri-ciri utama termasuk:

Okin 2 Button Round Hand Control Handset

Figure 1.1: The Okin Refined 2 Button Round Hand Control Handset, showing its compact design and integrated cable.

2. Persediaan dan Pemasangan

Before installation, ensure your existing control uses a 5-pin round plug for compatibility. This control is designed for straightforward replacement.

2.1 Mengenal pasti Penyambung

The Okin Refined Hand Control features a distinct 5-pin 90-degree connector. Verify that your recliner or lift chair's motor connection port matches this configuration.

Close-up of 5-pin 90-degree connector

Rajah 2.1: Terperinci view of the 5-pin 90-degree connector, crucial for compatibility verification.

2.2 Langkah Pemasangan

  1. Putuskan Kuasa: Before beginning, always unplug your recliner or lift chair from the wall outlet to prevent electrical hazards.
  2. Locate Existing Control: Identify where the current hand control is connected to the chair's motor or power supply. This is typically a cable running from the control to a port on the motor.
  3. Alih Keluar Kawalan Lama: Carefully disconnect the existing 5-pin plug from the motor. If the control is mounted in the arm, gently remove it from its housing.
  4. Connect New Control: Plug the 5-pin 90-degree connector of the new Okin hand control into the corresponding port on the chair's motor. Ensure the connection is firm and secure.
  5. Pasang Kawalan Baharu: Insert the new round hand control into the designated opening in the arm of your recliner or lift chair. Ensure it sits flush and is stable.
  6. Pulihkan Kuasa: Once the new control is securely installed, plug your recliner or lift chair back into the wall outlet.

Video 2.1: Tamatview demonstrating the Okin 2 Button Round Hand Control Handset, including its features and connection type, which can assist with installation.

3. Arahan Operasi

The Okin Refined Hand Control is designed for simple and intuitive operation.

3.1 Basic Recliner Operation

Close-up of the two-button control

Figure 3.1: Close-up of the two-button control, showing the distinct "Up" and "Down" sections.

3.2 USB Charging Functionality

This control features an integrated USB port, allowing you to charge compatible electronic devices such as smartphones and tablets while using your recliner. Simply connect your device's USB charging cable to the port on the hand control.

Nota: Charging speed may vary depending on the device and the power supply of your recliner. The USB port is for charging only and does not provide data transfer capabilities.

4. Penyelenggaraan

Proper maintenance ensures the longevity and optimal performance of your Okin Refined Hand Control.

5. Penyelesaian masalah

If you encounter issues with your Okin Refined Hand Control, refer to the following common troubleshooting steps:

MasalahKemungkinan PuncaPenyelesaian
Control is unresponsive or intermittent.Loose connection, power supply issue, damaged cable.
  • Ensure the 5-pin connector is fully and securely plugged into the motor.
  • Check that the recliner's power cord is securely plugged into a working wall outlet.
  • Inspect the entire length of the control cable for any visible damage (cuts, kinks, fraying). If damaged, replacement may be necessary.
  • Verify the chair's main power supply (transformer) is functioning correctly.
USB port is not charging devices.Device incompatibility, cable issue, power supply.
  • Ensure your device and charging cable are functioning correctly by testing them with another power source.
  • Verify the recliner is powered on and fully connected.
  • Some devices may require more power than the USB port can provide.
Chair moves slowly or with difficulty.Motor issue, obstruction, low power.
  • Check for any obstructions preventing the chair's mechanism from moving freely.
  • Ensure the power supply is adequate and stable.
  • If the issue persists, the motor itself may require professional inspection.

If these steps do not resolve the issue, please contact customer support or a qualified technician.

6. Spesifikasi

AtributPerincian
JenamaOkin
warnaHitam
Berat Barang3.52 auns
Dimensi Pakej4.61 x 3.7 x 1.89 inci
PengeluarOkin Refined
Faktor BentukRecliner (Control)
Jenis Penyambung5-pin Round, 90-degree
Komponen yang DisertakanUSB Cable (integrated into control)
KeserasianOkin, Flexsteel, Dewert, Limoss motors
Penggunaan yang DisyorkanPower Recliners, Lift Chairs, Home Theater Seating

7. Maklumat Keselamatan

For safe use of your recliner or lift chair with this control, please observe the following safety guidelines:

Refer to the product's original packaging or documentation for any additional safety information specific to your recliner or lift chair.

8. Waranti dan Sokongan

For information regarding warranty coverage for your Okin Refined 2 Button Round Hand Control Handset, please refer to the documentation provided with your original purchase or contact the seller directly.

If you require technical assistance, have questions about compatibility, or need to report a defect, please reach out to Okin customer support or the retailer from whom you purchased the product. Provide your product model number and purchase date when contacting support to facilitate a quicker resolution.

Dokumen Berkaitan - Okin Refined 2 Button Round Hand Control Handset

Praview Arahan Pemasangan untuk Kerusi Malas Angkat Kuasa YB2213
Panduan pemasangan langkah demi langkah untuk kerusi malas lif kuasa YB2213, termasuk kandungan pakej, langkah sambungan dan arahan pendawaian untuk kuasa dan alat kawalan jauh. Menampilkan fungsi haba dan urutan.
Praview Panduan Penggantian Alat Kawalan Jauh OKIN HSW306 5-Pin ke 7-Pin
Arahan langkah demi langkah untuk menggantikan alat kawalan jauh kerusi malas 5-pin OKIN HSW306 dengan model 7-pin, termasuk pintasan pendawaian, langkah pemasangan dan aksesori yang disyorkan.
Praview Panduan Penyelesaian Masalah Sistem Okin: Pembaikan dan Penyelenggaraan Kerusi Lif
Panduan penyelesaian masalah yang komprehensif untuk Sistem Okin yang digunakan dalam kerusi lif. Belajar untuk mendiagnosis dan menyelesaikan isu biasa dengan kawalan tangan, transformer, motor dan kacang gelendong. Termasuk petua pemasangan.
Praview Manual Pengendalian Sistem Kawalan Jauh Teknologi Elektrik OKIN Halus
Manual ini menyediakan arahan pengendalian terperinci untuk sistem kawalan jauh OKIN Refined Electric Technology, meliputi penerangan butang, tetapan kedudukan khas, dan prosedur pasangan wayarles.
Praview Manual Pengguna Sistem Kawalan Jauh OKIN RF.31.24.01
Manual pengguna yang komprehensif untuk sistem kawalan jauh 22 kekunci OKIN RF.31.24.01, memperincikan fungsi butang, prosedur tetapan kedudukan dan komponen sistem untuk katil boleh laras.
Praview Sistem Tempat Duduk OKIN: Komponen untuk Perabot Bergerak
Katalog komprehensif sistem tempat duduk OKIN, termasuk mekanisme kerusi malas manual dan kuasa, mekatronik, kerusi lif, kerusi santai, penyandar kepala, sokongan lumbar, penggerak, telefon bimbit, suis dan aksesori untuk perabot gerakan.