pengenalan
This manual provides comprehensive instructions for the setup, operation, and maintenance of your Sencor SDC 2800 W Digital Alarm Clock. Please read this manual thoroughly before using the device to ensure proper function and to maximize its lifespan. Keep this manual for future reference.
Produk Selesaiview
The Sencor SDC 2800 W is a digital alarm clock designed for clear time display, date, day of the week, and temperature readings. It features two independent alarms and a backlight for visibility in various lighting conditions.
This image displays the Sencor SDC 2800 W Digital Alarm Clock. The large digital display shows the time as 12:58 PM, with a PM indicator and a backlight icon. On the right side, smaller digits indicate the date as December 30th (30.12), the day of the week as Monday (MO), and the current temperature as 20.6°C. Below the temperature, there are two alarm icons, labeled 1 and 2, indicating the presence of two settable alarms. The clock has a white rectangular casing with control buttons visible on the top edge.
Control Buttons (Top Panel)
- SET: Enters setting mode for time, date, and alarms.
- UP/DOWN (▲/▼): Adjusts values during setting mode.
- ALM: Activates/deactivates alarms and enters alarm setting mode.
- SNOOZE / CAHAYA: Activates snooze function during an alarm; temporarily illuminates backlight.
Persediaan
Pemasangan Bateri
- Cari penutup petak bateri di belakang jam penggera.
- Tanggalkan penutup dengan menggeser atau mengangkatnya.
- Insert two (2) AAA batteries (not included) according to the polarity indicators (+ and -) inside the compartment.
- Gantikan penutup petak bateri dengan selamat.
- The clock will power on and display default settings or the current time if batteries were already present.
Arahan Operasi
Menetapkan Masa dan Tarikh
- Tekan dan tahan butang SET button for approximately 3 seconds until the time display starts flashing.
- Gunakan UP or TURUN butang untuk melaraskan jam. Tekan SET untuk mengesahkan.
- Gunakan UP or TURUN butang untuk melaraskan minit. Tekan SET untuk mengesahkan.
- Continue this process to set the year, month, and day.
- Selepas menetapkan hari, tekan SET to exit the time/date setting mode.
- Untuk bertukar antara format 12 jam dan 24 jam, tekan butang UP button while in normal time display mode. The "PM" indicator will appear for PM hours in 12-hour format.
Menetapkan Penggera (Penggera 1 dan Penggera 2)
- Tekan ke ALM button once to display Alarm 1 time.
- Tekan dan tahan butang ALM button for approximately 3 seconds until the Alarm 1 time starts flashing.
- Gunakan UP or TURUN buttons to adjust the Alarm 1 hour. Press ALM untuk mengesahkan.
- Gunakan UP or TURUN buttons to adjust the Alarm 1 minute. Press ALM untuk mengesahkan.
- Repeat steps 1-4 for Alarm 2 by pressing ALM again after setting Alarm 1.
- Untuk mengaktifkan atau menyahaktifkan penggera, tekan ALM button repeatedly in normal time display mode until the desired alarm icon (1 or 2) appears or disappears on the display.
Fungsi Tunda
- Apabila penggera berbunyi, tekan butang SNOOZE / CAHAYA butang untuk menyenyapkan penggera buat sementara waktu. Penggera akan berbunyi semula selepas beberapa minit (biasanya 5-10 minit).
- Untuk mematikan penggera sepenuhnya, tekan sebarang butang lain (cth., SET, ALM, UP, TURUN).
Lampu latar
- Tekan ke SNOOZE / CAHAYA button at any time to briefly illuminate the display backlight for better visibility in low light conditions.
Paparan Suhu
- The clock automatically displays the ambient temperature.
- Untuk bertukar antara Celsius (°C) dan Fahrenheit (°F), tekan butang TURUN butang semasa dalam mod paparan masa biasa.
Penyelenggaraan
- Pembersihan: Wipe the clock clean with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Penggantian Bateri: Replace batteries when the display becomes dim or functions become erratic. Always replace both batteries at the same time with new AAA batteries.
- Storan: If the clock will not be used for an extended period, remove the batteries to prevent leakage.
Menyelesaikan masalah
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Paparan kosong atau malap. | Bateri lemah atau tidak dipasang dengan betul. | Gantikan bateri dengan bateri AAA baharu, memastikan kekutuban yang betul. |
| Penggera tidak berbunyi. | Penggera tidak diaktifkan atau ditetapkan dengan tidak betul. | Ensure the alarm icon (1 or 2) is visible on the display. Verify alarm time is set correctly. |
| Masa/tarikh yang salah. | Time/date was not set or reset after battery change. | Follow the "Setting Time and Date" instructions to reset. |
| Bacaan suhu nampaknya tidak tepat. | Clock is placed near a heat source or in direct sunlight. | Relocate the clock to an area with stable ambient temperature. |
Spesifikasi
- Jenama: SENCOR
- model: SDC 2800 W
- warna: putih
- Jenis Paparan: digital
- Sumber Kuasa: 2 x Bateri AAA (tidak termasuk)
- Dimensi: 5.08 x 2.64 x 1.57 inci (12.9 x 6.7 x 4 cm)
- Berat Barang: 4.8 auns (137 gram)
- Ciri Khas: Alarm, Date, Day of Week, Temperature Display (°C/°F), Backlight
- Bahan: plastik
- Mod Operasi: Elektrik
Waranti dan Sokongan
For warranty information or technical support, please refer to the documentation provided with your purchase or contact Sencor customer service directly. Keep your proof of purchase for warranty claims.
For further assistance, visit the official Sencor webtapak atau hubungi saluran sokongan pelanggan mereka.
