Bingfu Vehicle Mobile Ham Radio Antenna

pengenalan

This manual provides detailed instructions for the installation, operation, and maintenance of your Bingfu Vehicle Mobile Ham Radio Antenna. Designed for optimal performance in VHF (136-174MHz) and UHF (400-470MHz) bands, this antenna kit includes a lip mount fixed bracket and a 5m (16.5 feet) RG58 cable with a PL259 male connector. Please read this manual thoroughly before use to ensure proper setup and safe operation.

Maklumat Keselamatan

• Ensure the antenna is securely mounted to prevent detachment during vehicle movement.
• Elakkan memasang antena berhampiran talian kuasa atau bahaya elektrik yang lain.
• Do not operate the radio or antenna in adverse weather conditions, such as lightning storms.
• Verify all connections are tight and properly insulated to prevent signal loss or short circuits.
• Keep the antenna away from children and pets.

Kandungan Pakej

Sila sahkan bahawa semua item yang disenaraikan di bawah disertakan dalam pakej anda:

• 1 x Dual Band Mobile Ham Radio Antenna (VHF 136-174MHz, UHF 400-470MHz)
• 1 x Lip Mount Fixed Bracket
• 1 x 5m (16.5 feet) RG58 Coaxial Cable with PL259 Male Connector
• 2 x Hexagon Wrenches (for installation)

Image: Complete Bingfu Vehicle Mobile Ham Radio Antenna kit, including the antenna, lip mount bracket, coaxial cable, and hexagon wrenches.

Persediaan

1. Antenna Assembly and Mounting

The antenna and lip mount bracket are designed for easy installation on various vehicle surfaces such as trunk lids, hood edges, or hatchback doors. The kit includes two hexagon wrenches for tightening the components.

Image: Step-by-step visual guide for assembling the lip mount bracket and attaching the antenna base. The image shows the bracket components, the SO239 female connector, and the final assembled mount.

Imej: Jarak dekat view of the two hexagon wrenches provided, illustrating their use for tightening the antenna and bracket components.

2. Protecting Vehicle Surface

The lip mount bracket includes protective gaskets to prevent damage to your vehicle's paint and surface. Ensure these are properly positioned during installation.

Image: Diagram showing the silicon rubber gasket and aluminum gasket integrated into the lip mount to protect the vehicle's surface from scratches and damage during installation.

3. Sambungan Kabel

Connect the PL259 male connector of the RG58 coaxial cable to the SO239 female connector on the antenna mount. Then, connect the other end of the PL259 male connector to your amateur mobile radio or ham radio equipment.

Image: Illustration detailing the connection points: the PL259 male connector from the cable connecting to the antenna mount, and the equipment interface (radio) where the cable connects. Note: Radio device is not included.

4. Antenna Placement Examples

The lip mount allows for flexible placement on various vehicle types. Ensure the antenna is positioned vertically and clear of obstructions for optimal performance.

Imej: Pelbagai bekasamples of the antenna mounted on different vehicles, including a Jeep's spare tire carrier, a motorcycle's rear rack, and a car's trunk lid, demonstrating versatile installation options.

Beroperasi

This antenna is designed for dual-band operation, covering VHF 136-174MHz and UHF 400-470MHz frequencies. It is compatible with a wide range of amateur mobile radios, ham radios, FRS, and GMRS two-way radios from brands such as BTECH, ICOM, Midland, Yaesu, TYT, AnyTone, Radioddity, Cobra, Uniden, President, Galaxy Audio, Pro Trucker, and Stryker.

Image: A vehicle driving on a road, illustrating the extended reception range provided by the antenna, with icons indicating resistance to rain, snow, CO2, and UV exposure.

Signal Optimization

• For best performance, ensure the antenna is mounted as high as possible and has a clear line of sight.
• Regularly check the SWR (Standing Wave Ratio) of your antenna system to ensure efficient power transfer and prevent damage to your radio. An SWR meter is recommended for this purpose.
• The antenna's design, including its stainless steel construction and low-loss RG58 cable, contributes to reliable signal transmission and reception.

Penyelenggaraan

Pembersihan

Periodically clean the antenna and mount with a soft, damp cloth to remove dirt, dust, and road grime. Avoid using abrasive cleaners or solvents that could damage the finish or materials.

Pemeriksaan

Regularly inspect the antenna, cable, and mount for any signs of wear, corrosion, or damage. Pay close attention to the cable's integrity and the tightness of all connections.

• Pembinaan Keluli Tahan Karat: The antenna features stainless steel components for enhanced durability and resistance to rust and water, making it suitable for various weather conditions.
• RG58 Coaxial Cable: The included RG58 cable is designed for low loss, ensuring efficient signal transmission between the antenna and your radio.

Imej: Jarak dekat view of the antenna's stainless steel elements, highlighting its waterproof and rust-proof properties, with water droplets visible on the surface.

Image: Cross-section diagram of the RG58 coaxial cable, showing its internal conductor (tinned copper), insulation (PE), outer conductor (tinned copper braid), and jacket (PVC), illustrating its low-loss design.

Menyelesaikan masalah

Spesifikasi

Waranti dan Sokongan

For warranty information or technical support regarding your Bingfu Vehicle Mobile Ham Radio Antenna, please contact the manufacturer directly. You can find more information and contact details by visiting the official Bingfu store:

Visit the Bingfu Store