Manual Pengguna Pengawal Cas Suria Renogy MPPT 30A

1. Pengenalan

This manual provides detailed instructions for the installation, operation, and maintenance of your Renogy MPPT 30A Solar Charge Controller. Designed for 12V/24V DC systems, this controller optimizes power harvesting from your solar panels and efficiently charges various battery types, including Lithium, AGM, and Gel. Please read this manual thoroughly before installation and use to ensure optimal performance and safety.

2. Produk Lebihview

Ciri-ciri Utama:

• Innovative MPPT Design: Die-cast aluminum design ensures excellent heat dissipation. Renogy's Maximum Power Point Tracking technology offers up to 99% tracking efficiency and 98% peak conversion efficiency, providing optimal charging even in cloudy conditions.
• Automatic 12V/24V Detection: Mengesan sistem DC 12V atau 24V secara automatik voltages. The LCD screen and multiple LED indicators display solar charging information, battery operation, customizable parameters, and error codes.
• Comprehensive System Protection: Features self-diagnostic capabilities to protect against reverse polarity, battery overcharge, battery over-discharge, overload, short circuit, and reverse current.
• Lanjutan 4-Stage Mengecas: Provides 4-stage charging (Bulk, Absorption, Float, and Equalization) for lead-acid batteries and 2-stage charging (Bulk and Absorption) for Lithium batteries, including Lithium reactivation.
• Versatile Load Control: Connect DC appliances directly to optional load terminals to monitor consumption or configure timed controls directly from the controller.
• Pemantauan Jauh: The RS232 communication port allows the Renogy Rover to connect with the Renogy BT-1 Bluetooth module (recommended, not included) for monitoring system status and productivity via the Renogy DC Home App.

Komponen Produk:

Rajah 1: Depan view of the Renogy MPPT 30A Solar Charge Controller, showing the LCD display, control buttons, and LED indicators.

Figure 2: Dimensions of the Renogy MPPT 30A Solar Charge Controller (238mm x 173mm x 72.5mm, Weight: 2.0kg).

Figure 3: Key features of the Renogy MPPT 30A Solar Charge Controller, including MPPT Technology, Electronic Protection, Reverse Protection, 4 Charging Stages, Max Input 100VDC, and RS232 Communication Port.

3. Persediaan & Pemasangan

Proper installation is crucial for the safe and efficient operation of your solar charging system. Follow these steps carefully.

Rajah Pendawaian:

Figure 4: General wiring diagram showing connections between solar panel, charge controller, battery, and optional inverter/load. Ensure correct polarity for all connections.

Connection Sequence:

1. Sambungkan bateri kepada pengawal cas.
2. Connect the solar panel to the charge controller.
3. Connect the DC load (if applicable) to the charge controller.

Penting: Always connect the battery first and disconnect the solar panel first when disassembling the system. This prevents damage to the controller.

Video Guide: Installation and Basic Operation

4. Arahan Operasi

The Renogy MPPT 30A Solar Charge Controller features an intuitive LCD display and control buttons for easy operation and monitoring.

Antara Muka Paparan LCD:

Gambar 5: Lebihview of the LCD display, showing various parameters such as main screen, solar panel voltage, charging current, battery capacity, battery voltage, load current, ambient temperature, discharged Ah, and accumulated Ah.

Use the "SELECT" and "ENTER" buttons to navigate through the display screens and adjust settings.

Tetapan Jenis Bateri:

The controller supports various battery types. To select your battery type:

1. Press the "SELECT" button to navigate to the battery type interface.
2. Long press the "ENTER" button until the battery type number flashes.
3. Use the "SELECT" button to cycle through the available battery types (Sealed, Gel, Flooded, Lithium, User).
4. Press "ENTER" to confirm your selection.

Figure 6: Display showing different battery type options: Sealed (default), Gel, Flooded, Li (Lithium), and User-defined.

Load Mode Settings:

The controller offers various load operating modes. To adjust the load mode:

1. Press the "SELECT" button to navigate to the load mode interface.
2. Long press the "ENTER" button until the load mode number flashes.
3. Use the "SELECT" button to cycle through the available load modes (e.g., 24-hour, dusk-to-dawn, timed, manual).
4. Press "ENTER" to confirm your selection.

For manual load control, you can activate/deactivate the load directly via the ENTER button when in manual load mode.

Jilid Lanjutantage Parameters (User-Defined Battery Type):

If you select the "User" battery type, you can customize various voltage parameters. This is typically for advanced users or specific battery chemistries not covered by the default settings. Refer to your battery manufacturer's specifications for appropriate values.

Untuk melaraskan voltage parameter:

1. Ensure the battery type is set to "User".
2. Navigate to the desired voltage parameter screen using the "SELECT" button.
3. Long press the "ENTER" button until the value flashes.
4. Use the "SELECT" button to adjust the value.
5. Press "ENTER" to confirm the new value.

Nota: vol. salahtage settings can damage your battery. Consult your battery's specifications or a qualified professional before making adjustments.

5. Penyelenggaraan

Regular maintenance ensures the longevity and optimal performance of your Renogy MPPT 30A Solar Charge Controller.

• Kebersihan: Pastikan pengawal bersih dan bebas daripada habuk dan serpihan. Gunakan kain kering untuk pembersihan.
• Sambungan: Periodically check all wiring connections for tightness and corrosion. Loose connections can cause overheating and damage.
• Pengudaraan: Ensure adequate airflow around the controller for proper heat dissipation. Do not block ventilation openings.
• Pemeriksaan Bateri: Regularly inspect your batteries for any signs of damage, swelling, or leakage. Ensure battery terminals are clean and secure.
• Kemas kini Firmware: Check the Renogy website for any available firmware updates for your controller model.

6. Penyelesaian masalah

If you encounter issues with your solar charging system, refer to the following common troubleshooting steps:

• Tiada Paparan/Kuasa:
  • Periksa sambungan bateri dan pastikan ia selamat dan terkutub dengan betul.
  • Sahkan vol. bateritage is within the controller's operating range (12V/24V).
  • Inspect fuses or circuit breakers in the battery circuit.
• No Charging from Solar Panels:
  • Ensure solar panel connections are secure and correctly polarized.
  • Check for sufficient sunlight reaching the solar panels.
  • Verify solar panel voltage berada dalam julat input pengawal.
  • Inspect any inline fuses or circuit breakers in the solar panel circuit.
• Beban Tidak Berfungsi:
  • Check load connections and ensure they are secure and correctly polarized.
  • Verify the load mode setting on the controller.
  • Check for overcurrent or short circuit on the load terminals.
  • Pastikan bateri voltage berada di atas vol rendahtage disconnect (LVD) setting.
• Kod Ralat:
  • Refer to the controller's LCD display (Figure 5) for any error codes. Consult the full product manual (if provided separately) for specific error code definitions and solutions.

If the issue persists after following these steps, contact Renogy customer support for further assistance.

7. Spesifikasi

8. Waranti & Sokongan

Untuk maklumat jaminan dan sokongan teknikal, sila rujuk Renogy rasmi webtapak atau hubungi perkhidmatan pelanggan mereka secara langsung. Simpan resit pembelian anda sebagai bukti pembelian untuk tuntutan waranti.

Renogy is committed to providing high-quality renewable energy products and support to its customers.