pengenalan
The Coredy R300 Robot Vacuum Cleaner is designed to provide efficient and automated cleaning for your home. With 1700Pa of powerful suction, it effectively picks up dirt, dust, hair, pet fur, and debris from various floor types, including hardwood floors and medium-pile carpets. Its ultra-slim design allows it to navigate under furniture, ensuring a thorough clean. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your R300 robot vacuum cleaner.
Apa yang Termasuk
Upon unboxing your Coredy R300 Robot Vacuum Cleaner, please ensure all components are present:
- R300 robot vacuum (Dust bin included) x1
- Upgraded side brushes x4
- Extra high efficiency filter x1
- Flat cleaning tool x1
- Alat kawalan jauh x1
- Charging base station x1
- AC power adapter x1
- Manual pengguna x1
- Manufacturer's Warranty x1
Figure 1: Coredy R300 Robot Vacuum Cleaner and its remote control.
Arahan Keselamatan Penting
Before using your Coredy R300, please read and understand all safety instructions. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- Ensure the power switch is ON before using or charging the robot vacuum.
- Use only the original charging base and AC power adapter provided by Coredy.
- Do not operate the robot vacuum in wet environments or on wet surfaces.
- Jauhkan pakaian, rambut, jari, dan semua bahagian badan yang longgar daripada bukaan dan bahagian yang bergerak.
- Jangan mengutip objek, cecair atau bahan yang besar atau tajam yang boleh membakar/menghisap.
- Regularly clean the dust bin and filters to maintain optimal performance and prevent overheating.
- Awasi kanak-kanak dan haiwan peliharaan semasa vakum robot beroperasi.
- Store the robot vacuum and charging base in a dry, safe place when not in use.
Persediaan
1. Penempatan Tapak Pengecasan
Select an open, uncluttered area against a wall for the charging base. Ensure there are no obstacles within 3 feet (1 meter) in front of the charging base and 1.5 feet (0.5 meters) on either side. Place the charging base flat on a hard floor to ensure stability and proper docking.
Figure 2: The robot vacuum automatically returns to its charging base.
2. Pengecasan Awal
Before first use, fully charge the robot vacuum. Connect the AC power adapter to the charging base and plug it into a wall outlet. Place the robot vacuum onto the charging base, ensuring the charging contacts align. The indicator light on the robot will show charging status. A full charge typically takes several hours.
3. Memasang Berus Sisi
Gently press the side brushes onto the square posts at the bottom of the robot until they click into place. Ensure the brushes are securely attached.
Mengendalikan Robot Vakum
Mod Pembersihan
The Coredy R300 offers four distinct cleaning modes to suit various cleaning needs:
- Pembersihan Auto: Robot bijak mengemudi dan membersihkan seluruh kawasan lantai.
- Pembersihan Tepi: Robot membersihkan sepanjang dinding dan tepi perabot.
- Pembersihan Tempat: Robot itu memberi tumpuan kepada kawasan kotor tertentu, membersihkan dalam corak lingkaran.
- Low Noise Cleaning: Operates with reduced suction for quieter cleaning, suitable for times when minimal disturbance is desired.
Figure 3: The Coredy R300 offers multiple cleaning modes for versatile use.
Menggunakan Alat Kawalan Jauh
The included remote control allows you to start, stop, schedule, and select cleaning modes for your R300. Refer to the remote control diagram in the physical manual for button functions.
Navigasi dan Sensor
The R300 is equipped with upgraded anti-collision and anti-drop intelligent sensor technology, along with a pressure-sensitive soft bumper. These features enable the robot to navigate around obstacles, avoid falling down stairs, and clean effectively without damaging furniture.
Figure 4: Smart protection features help the robot navigate safely.
Runtime and Auto-Recharge
The R300 provides up to 110 minutes of continuous cleaning on a full charge. When the battery is low, the robot will automatically return to its charging base to recharge, ensuring it is always ready for the next cleaning cycle.
Penyelenggaraan
Regular maintenance is crucial to keep your Coredy R300 operating at optimal performance.
Pembersih Debu dan Penapis
The dust bin should be emptied after each cleaning cycle, especially if cleaning pet hair. To clean the dust bin:
- Keluarkan tong habuk dari robot.
- Buka tong habuk dan buang isinya ke dalam bekas sampah.
- Remove the filter assembly. Tap the HEPA filter gently to dislodge dust. For a more thorough clean, the dust bin and pre-filter can be rinsed with mild soap and water. Ensure all parts are completely dry before reassembling and placing back into the robot.
- The HEPA filter should be replaced regularly, depending on usage, to maintain filtration efficiency.
Figure 5: Underside of the robot vacuum, showing components for maintenance.
Penyelenggaraan Berus Sisi
Periodically check the side brushes for tangled hair or debris. Remove any obstructions to ensure effective cleaning. Replace worn or damaged side brushes with the provided spares.
Pembersihan Sensor
Wipe the anti-drop and anti-collision sensors with a clean, dry cloth to remove dust and ensure proper function. Static charge can attract dust to the robot's surface and sensors; a soft cloth sprayed with static guard can be used to wipe down the exterior.
Menyelesaikan masalah
If you encounter issues with your Coredy R300, refer to the following common problems and solutions:
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Robot tidak boleh dihidupkan atau dicas. | Power switch is OFF; charging contacts are not aligned; adapter not plugged in. | Ensure power switch is ON. Verify robot is properly docked on charging base. Check if AC adapter is securely plugged into outlet and charging base. |
| Robot kerap tersangkut. | Obstacles (cables, loose rugs); long carpet fringe; dirty sensors. | Clear the cleaning area of cables and small objects. Avoid using on rugs with long fringe or tassels. Clean the robot's sensors. |
| Reduced suction or poor cleaning performance. | Full dust bin; clogged filter; tangled side brushes. | Empty the dust bin. Clean or replace the filter. Remove any hair or debris from the side brushes. |
| Robot tidak kembali ke pangkalan pengecasan. | Charging base is obstructed or moved; low battery. | Ensure charging base is in an open, uncluttered area. Manually place robot on base if battery is critically low. |
Spesifikasi
| Ciri | Perincian |
|---|---|
| Jenama | Coredy |
| Nombor Model | R300 |
| Kuasa Sedutan | 1700Pa |
| Ciri Khas | Optional Cleaning Modes, Spotless Clean, 2.7” super slim design, 110MINS CONSTANT RUNTIME |
| warna | R300 (Grey/Black) |
| Jenis Penapis | Disk (High Efficiency Filter) |
| Hayat Bateri | Sehingga 110 minit |
| Kapasiti Tong Debu | 0.4 Liter |
| Sumber Kuasa | Corded Electric (via charging base) |
| Kaedah Kawalan | Alat Kawalan Jauh |
| Dimensi Produk | 12.8 x 12.8 x 2.7 inci |
| Berat Barang | 7.73 paun |
| Bateri | 1 bateri Lithium Ion (termasuk) |
| UPC | 644824523323 |
Waranti dan Sokongan
Your Coredy R300 Robot Vacuum Cleaner comes with a manufacturer's warranty. Please refer to the warranty card included in your package for specific terms and conditions.
For technical support, troubleshooting assistance, or warranty claims, please contact Coredy Customer Service. You can find contact information on the official Coredy webtapak atau melalui platform pembelian anda.
For additional resources and product information, visit the official Coredy Store: Coredy Store on Amazon.
