PROEL MQ6FX Compact 6-channel Mixer with FX

1. Arahan Keselamatan Penting

Please read these instructions carefully before operating the PROEL MQ6FX mixer. Retain this manual for future reference. Always follow basic safety precautions to reduce the risk of fire, electric shock, and injury to persons.

• Sumber Kuasa: Connect the unit only to a power supply of the type described in this manual or marked on the unit.
• Pembumian: Jangan kalahkan tujuan keselamatan palam terkutub atau jenis pembumian.
• Air dan Kelembapan: Jangan gunakan peralatan ini berhampiran air atau dedahkannya kepada titisan atau percikan.
• Pengudaraan: Pastikan pengudaraan yang betul. Jangan sekat sebarang bukaan pengudaraan.
• haba: Jangan pasang berhampiran mana-mana sumber haba seperti radiator, daftar haba, dapur, atau radas lain (termasuk amppenghidup) yang menghasilkan haba.
• Pembersihan: Bersihkan hanya dengan kain kering.
• Servis: Rujuk semua servis kepada kakitangan perkhidmatan yang berkelayakan. Servis diperlukan apabila radas telah rosak dalam apa jua cara, seperti kord bekalan kuasa atau palam rosak, cecair telah tertumpah atau objek jatuh ke dalam radas, radas telah terdedah kepada hujan atau lembapan, tidak beroperasi seperti biasa. , atau telah digugurkan.

2. Produk Lebihview

The PROEL MQ6FX is a compact 6-channel mixer designed to offer high input density, a comprehensive feature set, and superior audio quality in a portable and durable package. It includes studio-grade effects with 100 DSP presets, a 3-band EQ, and an LED display for enhanced control.

Ciri-ciri Utama:

• 6 Input
• EQ 3-Band
• Paparan LED
• 100 Pratetap DSP
• Kesan Gred Studio

Mixer Layout:

Imej 2.1: Atas view of the PROEL MQ6FX mixer, showing all inputs, controls, and outputs.

Penerangan Panel Kawalan:

• MIC/LINE Inputs (Channels 1-2, 3/4, 5/6): Combo XLR/TRS jacks for connecting microphones or line-level instruments. Channels 1 and 2 are mono, while 3/4 and 5/6 can be used as stereo pairs or mono inputs.
• LO CUT 75Hz Switch: Activates a low-cut filter at 75 Hz for the respective input channel, useful for removing unwanted low-frequency rumble from microphones.
• Tombol RENDAH: Adjusts the low-frequency equalization for the channel.
• Tombol FX: Controls the amount of signal sent from the channel to the internal effects processor.
• MIX Knob (Channels): Adjusts the individual channel's volume level in the main mix.
• 24-BIT DIGITAL EFFECT Section: Contains controls for the built-in digital effects processor.
• Tombol PRATESETA: Selects one of the 16 available digital effect presets. The LED display shows the selected preset number.
• FX LEVEL Knob: Adjusts the overall output level of the effects processor.
• Butang FX: Engages or disengages the effects processor.
• LED PUNCAK: Illuminates when the effects processor input signal is too high, indicating potential clipping.
• PHANTOM POWER Switch: Activates +48V phantom power for condenser microphones connected to the XLR inputs.
• PADA LED: Indicates that the mixer is powered on.
• LED KLIP: Illuminates when the main output signal is too high, indicating clipping.
• Level Meter LEDs (-20, -10, 0, +6): Provide visual indication of the main output signal level.
• MAIN MIX Outputs (L/R): XLR outputs for connecting the main stereo mix to an ampalat penghidup atau rakaman.
• Output TELEFON: TRS jack for connecting headphones for monitoring.
• MIX Knob (Master): Controls the overall volume level of the main stereo mix.

3. Persediaan

3.1 Sambungan Kuasa

1. Pastikan suis kuasa pengadun berada dalam kedudukan OFF.
2. Sambungkan penyesuai kuasa yang disediakan kepada input kuasa pengadun.
3. Pasangkan penyesuai kuasa ke dalam soket kuasa AC yang sesuai.

3.2 Sambungan Input Audio

• Mikrofon: Connect microphones to the MIC/LINE XLR inputs (Channels 1-2, 3/4, 5/6). If using condenser microphones, ensure the PHANTOM POWER switch is engaged.
• Instrumen Tahap Talian: Connect instruments such as keyboards, guitars with preamps, or media players to the MIC/LINE TRS inputs. For stereo sources, use channels 3/4 or 5/6.

3.3 Sambungan Output Audio

• Keluaran Utama: Connect the MAIN MIX XLR outputs (L/R) to your amplampu, pembesar suara berkuasa atau antara muka rakaman.
• Fon kepala: Connect your headphones to the PHONES TRS output for monitoring.

4. Arahan Operasi

4.1 Menghidupkan/Mematikan

1. Before powering on, ensure all channel MIX knobs and the master MIX knob are set to their minimum position (-∞).
2. Flip the power switch to the ON position. The ON LED will illuminate.
3. To power off, first lower all volume levels, then flip the power switch to OFF.

4.2 Melaraskan Tahap Input

1. For each active input channel, gradually increase its MIX knob.
2. Monitor the main output level meters. Adjust individual channel MIX knobs to achieve a healthy signal level without the CLIP LED illuminating.
3. If using microphones, consider engaging the LO CUT 75Hz switch to reduce low-frequency noise.

4.3 Menggunakan Penyama (EQ)

Each channel features a LOW knob to adjust the low-frequency content of the input signal. Rotate clockwise to boost low frequencies or counter-clockwise to cut them.

4.4 Applying Digital Effects

1. Press the FX button to engage the effects processor.
2. Use the PRESET knob to select one of the 16 available effects. The LED display will show the preset number. Refer to the mixer's panel for a list of effects (e.g., Hall, Room, Vocal, Plate, Delay, Chorus).
3. Adjust the FX knob on individual channels to send the desired amount of signal to the effects processor.
4. Use the master FX LEVEL knob to control the overall volume of the applied effect in the main mix.
5. If the PEAK LED illuminates, reduce the FX knob on individual channels or the master FX LEVEL.

4.5 Kuasa Hantu

The PHANTOM POWER switch provides +48V DC to the XLR inputs, necessary for operating condenser microphones. Only engage this switch when condenser microphones are connected. Ensure all channel volumes are down before engaging or disengaging phantom power to prevent loud pops.

4.6 Pemantauan

Connect headphones to the PHONES output to monitor the main mix. The headphone volume is typically controlled by the master MIX knob.

5. Penyelenggaraan

5.1 Pembersihan

Clean the mixer's exterior with a soft, dry cloth. Do not use abrasive cleaners, waxes, or solvents. Avoid spraying liquids directly onto the unit.

5.2 Penyimpanan

When not in use for extended periods, store the mixer in a cool, dry place, away from direct sunlight and extreme temperatures. Disconnect the power adapter.

6. Penyelesaian masalah

• Tiada Keluaran Bunyi:
  • Check all power connections and ensure the mixer is ON.
  • Verify that all channel MIX knobs and the master MIX knob are turned up.
  • Ensure input sources are connected correctly and producing a signal.
  • Semak sambungan ke amppembesar suara/dikuasakan.
• Bunyi Herot:
  • Reduce individual channel MIX knobs or the master MIX knob if the CLIP LED is illuminated.
  • Check input levels from your sources to ensure they are not overdriving the mixer's inputs.
• Kesan Tidak Berfungsi:
  • Ensure the FX button is engaged.
  • Check that the FX knob on the desired channel is turned up.
  • Verify the master FX LEVEL knob is turned up.
• Tiada Kuasa Hantu:
  • Ensure the PHANTOM POWER switch is engaged.
  • Confirm that the microphone requires phantom power.

7. Spesifikasi

8. Waranti dan Sokongan

PROEL products are designed and manufactured to the highest quality standards. For information regarding warranty coverage, terms, and conditions, please refer to the warranty card included with your product or visit the official PROEL webtapak.

For technical support, service, or replacement parts, please contact PROEL customer service or your authorized PROEL dealer. Keep your purchase receipt as proof of purchase for warranty claims.