Audio-Technica AT-LP60XBT-WH Fully Automatic Bluetooth Belt-Drive Stereo Turntable

pengenalan

The Audio-Technica AT-LP60XBT-WH is a fully automatic belt-drive stereo turntable designed for both wired and wireless audio playback. It features Bluetooth wireless technology for connecting to compatible speakers, headphones, or other devices, including support for the aptX codec for enhanced sound quality. The turntable also offers traditional wired connectivity via its dual RCA output cable. Its automatic operation simplifies playback with front-panel controls for start, stop, and tonearm lift. The unit incorporates a dual magnet cartridge with a replaceable stylus and plays records at 33-1/3 and 45 RPM speeds.

This image displays the Audio-Technica AT-LP60XBT-WH turntable from an elevated angle. The unit is white and black, with a clear, hinged dust cover lifted open. The black platter, featuring the Audio-Technica logo, is visible, along with the tonearm and stylus. Control buttons for speed, start, and stop are located on the front panel.

Kandungan Pakej

Sahkan bahawa semua item berikut disertakan dalam pakej anda:

• AT-LP60XBT-WH Turntable Unit
• Detachable RCA output cable (3.5 mm male to dual RCA male)
• Penyesuai 45 RPM
• Penutup habuk berengsel boleh tanggal

Persediaan

1. penempatan: Letakkan meja putar pada permukaan yang stabil dan rata dari cahaya matahari langsung, sumber haba dan getaran yang berlebihan.
2. Pasang Platter dan Belt:
   • Letakkan plat aluminium dengan berhati-hati di atas gelendong meja putar.
   • Locate the drive belt, which is usually pre-installed on the underside of the platter or included separately.
   • Align the belt with the motor pulley, which is typically a small brass or plastic cylinder located near the spindle. Use the red tab to pull the belt over the motor pulley. Ensure the belt is not twisted.
   • Letakkan tikar felt di atas pinggan.
3. Pasang Penutup Habuk: Insert the hinges of the dust cover into the hinge holders at the rear of the turntable unit.
4. Sambung ke Kuasa: Connect the AC adapter to the turntable's power input and then plug it into a wall outlet.
5. Sambungan Audio:
   • Sambungan Berwayar: Connect the included dual RCA output cable from the turntable's output jacks to the audio input of your amplifier, powered speakers, or stereo system. Ensure the PHONO/LINE switch on the rear of the turntable is set correctly (PHONO for phono input, LINE for line input).
   • Sambungan Wayarles (Bluetooth): Proceed to the Bluetooth Connectivity section for pairing instructions.

Arahan Operasi

1. Hidupkan kuasa: Press the power button on the front panel to turn on the turntable. The Bluetooth indicator will illuminate.
2. Pilih Kelajuan: Press the 'SPEED' button to select the appropriate playback speed for your record (33-1/3 RPM or 45 RPM).
3. Rekod Tempat: Place a record on the platter. If playing a 45 RPM single, use the included 45 RPM adapter.
4. Mula Main Semula: Press the 'START' button. The tonearm will automatically move to the beginning of the record and begin playback.
5. Hentikan Main Balik: Press the 'STOP' button. The tonearm will automatically lift, return to its rest, and the platter will stop spinning.
6. Manual Tonearm Lift: Use the 'TONEARM LIFT' button to manually raise or lower the tonearm during playback if needed.

Kesambungan Bluetooth

The AT-LP60XBT-WH turntable can connect wirelessly to Bluetooth-enabled speakers, headphones, or other audio devices.

1. Enable Bluetooth on your device: Ensure your Bluetooth speaker or headphones are in pairing mode. Refer to your device's manual for specific instructions.
2. Initiate Turntable Pairing: With the turntable powered on, press and hold the Bluetooth button (usually indicated by a Bluetooth symbol) on the turntable's front panel for a few seconds until the Bluetooth indicator light begins to flash rapidly. This indicates the turntable is in pairing mode.
3. Sambung: Once the turntable and your Bluetooth device are successfully paired, the Bluetooth indicator light on the turntable will change from rapidly flashing to a steady blue light.
4. aptX Codec: This turntable supports the aptX codec, which provides higher quality audio streaming over Bluetooth with compatible devices.

Penyelenggaraan

• Penutup habuk: Keep the dust cover closed when not in use to protect the turntable from dust and debris. Clean the dust cover with a soft, dry cloth. Avoid using harsh chemicals.
• Penjagaan Stylus: Gently clean the stylus regularly using a soft brush designed for stylus cleaning, brushing from back to front. A dirty stylus can degrade sound quality and damage records.
• Penggantian Stilus: The stylus is replaceable. Refer to the Audio-Technica website or your local dealer for compatible replacement styli.
• Turntable Body: Wipe the turntable body with a soft, dry cloth. Do not use solvents or abrasive cleaners.

Menyelesaikan masalah

Spesifikasi

Waranti dan Sokongan

For detailed warranty information, product registration, and customer support, please refer to the documentation included with your Audio-Technica AT-LP60XBT-WH turntable or visit the official Audio-Technica website. Contact information for technical assistance and service may also be found there.