Bars BARSH1S1L91

Bars H1S1L-27 Head Gasket Leak Stopper 600ml Instruction Manual

Jenama: Bars | model: BARSH1S1L91

1. Produk Lebihview

The Bars Head Gasket Sealant and Repair Additive is designed to address leaks in engine cooling systems, specifically targeting blown or damaged cylinder head gaskets. This 600ml formula contains a combination of anti-freeze sodium silicate (liquid glass) and various sized sealing particles. These components work to penetrate gaps and crevices in the engine block and cooling system near the combustion chamber, forming a seal.

This product is intended for use in vehicles that do not exhibit severe overheating or require frequent coolant top-ups after short periods of engine operation (15-30 minutes).

Bars Head Gasket Stop Leak & Block Repair bottle

Imej 1.1: Bars Head Gasket Stop Leak & Block Repair 600ml bottle. This image displays the front label of the product, highlighting its primary function as a head gasket and block repair solution.

2. Maklumat Keselamatan

  • Awas: Always exercise extreme caution when working near an engine. Engine components can reach high temperatures and cause severe burns.
  • Pengudaraan: Ensure adequate ventilation when working in enclosed spaces.
  • Eye and Skin Protection: Wear appropriate eye protection and gloves to prevent contact with the product. In case of contact, rinse thoroughly with water.
  • Pengingesan: Jangan termakan. Jika tertelan, dapatkan rawatan perubatan segera.
  • Storan: Keep out of reach of children and pets. Store in a cool, dry place.
  • Keserasian: This product is not suitable for cooling systems with a capacity of 3 liters or less.

3. Persediaan dan Permohonan

  1. Engine Condition: Ensure the engine is cool before beginning the application process.
  2. Goncang dengan baik: Shake the entire bottle of Bars Head Gasket Sealant thoroughly before use to ensure proper mixing of components.
  3. Pemeriksaan Tahap Penyejuk: Check the current coolant level. If the cooling system is already full, it may be necessary to drain a small amount of existing coolant to accommodate the entire 600ml bottle of product.
  4. Tambah Produk: Add the entire contents of the bottle directly into the vehicle's radiator. If direct access to the radiator is not possible, the product can be added via the radiator hose or the pressurized overflow tank.
  5. Dos: One 600ml bottle treats up to 10 liters of coolant. Ensure the entire bottle is used for optimal results.
Back of Bars Head Gasket Stop Leak bottle with multi-language instructions

Imej 3.1: Back of Bars Head Gasket Stop Leak bottle. This image shows the detailed instructions and warnings printed on the back label, including multi-language information.

4. Arahan Operasi

  1. Initial Engine Run: Start the engine and allow it to run until it reaches its normal operating temperature.
  2. Sejukkan Diri: Once normal operating temperature is reached, switch off the vehicle and allow the engine to cool down completely.
  3. High Idle Run: Restart the vehicle and run the engine at a high idle for approximately 15 minutes. This helps circulate the product and facilitate the sealing process.
  4. Final Cool Down & Top-Up: Turn the vehicle off again and allow it to cool down. After cooling, check the coolant level and top up the radiator with appropriate coolant if necessary.

5. Maintenance and Ongoing Protection

When used correctly, Bars Head Gasket Sealant provides continuous protection against small leaks in the cylinder head gasket and engine block. Regular checks of your coolant level and system integrity are always recommended as part of routine vehicle maintenance.

6. Penyelesaian masalah

This product is most effective for small leaks and early symptoms of head gasket failure. It is recommended for vehicles that do not overheat or require a coolant fill after idling the engine for 15-30 minutes. If your vehicle exhibits severe overheating, significant coolant loss, or other major mechanical issues, this product may not be sufficient, and professional mechanical inspection is advised.

7. Spesifikasi Produk

AtributPerincian
JenamaBar
Nombor ModelBARSH1S1L91
Nombor Bahagian Pengilang1830976
Kelantangan600ml
bahanGlass (referring to the active ingredient, sodium silicate)
Berat Barang1.35 paun
Dimensi Produk2.28 x 3.7 x 7.17 inci
KeserasianCompatible with all anti-freeze types. Not suitable for cooling systems under 3 liters.

8. Waranti dan Sokongan

For product support, technical assistance, or warranty inquiries, please refer to the official Bars weblaman web atau hubungi khidmat pelanggan mereka secara langsung. Butiran jaminan khusus mungkin berbeza mengikut wilayah dan peruncit.

Pengeluar: Bar

Webtapak: www.barsgroup.com

Dokumen Berkaitan - BARSH1S1L91

Praview Panduan Pemasangan Papan Larian iBoard - APS
Arahan pemasangan langkah demi langkah untuk papan larian APS iBoard (bar langkah) untuk kenderaan, termasuk senarai bahagian dan butiran perkakasan. Model IB-010C&H.
Praview Panduan Pemasangan Bar Langkah MaxMate 3.5" - SS2N35208MX
Panduan pemasangan komprehensif untuk MaxMate 3.5" Step Bars (Model SS2N35208MX). Termasuk senarai alat ganti, spesifikasi tork dan arahan langkah demi langkah terperinci untuk pemasangan pada kenderaan seperti Nissan Frontier. Pastikan pemasangan yang betul dan selamat.
Praview Panduan Pemasangan Papan Larian iBoard - IB-054C&H
Manual pemasangan rasmi untuk papan larian iBoard oleh APS (model IB-054C&H). Menyediakan arahan langkah demi langkah yang terperinci, senarai bahagian dan spesifikasi pengikat untuk pemasangan kenderaan.
Praview Panduan Pemasangan Bar Langkah MaxMate 3.5" (SS2D35098MX)
Arahan pemasangan langkah demi langkah untuk MaxMate 3.5" Step Bars (model SS2D35098MX), termasuk senarai bahagian, nilai tork dan prosedur pemasangan untuk Ram 1500.
Praview Arahan Pemasangan Palang Silang Jaguar F-PACE - Panduan Pemasangan
Arahan pemasangan terperinci untuk palang palang Jaguar F-PACE (No. Bahagian T4A6946). Ketahui cara memasang, menanggalkan dan memasang semula palang palang rak bumbung dengan selamat untuk kenderaan F-PACE anda.
Praview Panduan Pemasangan Pemasangan Panel Rocker iArmor IA-S044
Arahan pemasangan terperinci untuk Pemasangan Panel Rocker iArmor IA-S044 oleh APS. Termasuk senarai alat ganti, spesifikasi tork dan panduan langkah demi langkah untuk Ford F-150 2004-2008 SuperCrew Cab.