pengenalan
This manual provides detailed instructions for the assembly, operation, and maintenance of your Keter XL Garage Tall Resin Cabinet, Model 241543. Please read all instructions carefully before beginning assembly and retain this manual for future reference.
Imej: Depan view of the Keter XL Garage Tall Resin Cabinet, showcasing its black finish and two doors with soft-touch handles.
Maklumat Keselamatan
AMARAN:
- Always place the cabinet on a flat, level surface.
- Use the adjustable feet to ensure maximum stability and prevent tipping.
- For secure storage, utilize the padlock location on the doors. A padlock is not included.
- Do not exceed the maximum load capacity of 45 kg (99 lbs) per shelf. The total capacity is 135 kg (297 lbs).
- Ensure all components are correctly assembled before use to maintain structural integrity.
Persediaan dan Perhimpunan
Anggaran masa pemasangan: Lebih kurang 15 minit.
Alat yang Diperlukan:
- No special tools are typically required for Keter products, but a rubber mallet or screwdriver might be helpful for some connections.
Langkah Perhimpunan:
- Buka Pembungkusan Komponen: Carefully remove all parts from the packaging. Verify that all components are present and undamaged. Refer to the parts list (usually included in the box) to ensure completeness.
- Pangkalan Berhimpun: Connect the side panels to the base unit. Ensure they click securely into place.
- Pasang Panel Belakang: Slide the back panels into the designated grooves on the side and base units.
- Lampirkan Panel Atas: Secure the top panel to the assembled sides and back.
- Sisipkan Rak: Position the metal profiles for the shelves at your desired height. Insert the adjustable shelves onto these profiles. The cabinet includes 3 adjustable interior shelves.
- Pasang Pintu: Mount the doors using the metal hinges. Ensure they swing freely and close properly.
- Pasang Pemegang: Attach the soft-touch handles to the doors.
- Laraskan Kaki: Place the cabinet in its final location. Use the adjustable feet to level the cabinet and ensure stability on uneven surfaces.
Imej: Dalaman view of the cabinet showing the three adjustable shelves and their metal support profiles.
Image: Close-up of a metal hinge on the cabinet door, illustrating the robust connection point.
Arahan Operasi
Melaraskan Rak:
The cabinet features three adjustable shelves. To change a shelf's height:
- Empty the shelf completely.
- Angkat rak dengan berhati-hati dan keluarkannya dari kedudukannya sekarang.
- Relocate the metal support profiles to the desired height slots on the cabinet's side panels.
- Place the shelf back onto the newly positioned support profiles, ensuring it is level and secure.
Menjaga Kabinet:
For added security, the cabinet doors are designed to be padlockable. Insert a standard padlock (not supplied) through the designated holes on the handles to secure the contents.
Image: Close-up of the cabinet's soft-touch handles, showing the integrated provision for a padlock.
Penyelenggaraan
The Keter XL Garage Tall Resin Cabinet is designed for durability and low maintenance. Follow these guidelines to ensure its longevity:
- Pembersihan: Wipe down the cabinet with a damp cloth and mild soap. Avoid abrasive cleaners or harsh chemicals, as these can damage the resin material.
- Pemeriksaan: Periodically check all connections and hinges to ensure they remain secure. Tighten any loose screws if necessary.
- Beban Rak: Always adhere to the maximum load capacity per shelf (45 kg) to prevent warping or damage.
- Keadaan Persekitaran: While designed for indoor use, avoid prolonged exposure to extreme temperatures or direct sunlight to prevent material degradation.
Menyelesaikan masalah
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Cabinet is unstable or wobbly. | Uneven floor surface; feet not properly adjusted. | Ensure the cabinet is on a flat surface. Adjust the height of the individual feet until the cabinet is stable. |
| Pintu tidak ditutup dengan betul atau tidak sejajar. | Incorrect hinge installation; cabinet not level; obstruction. | Check hinge installation and ensure all screws are tight. Verify the cabinet is level using the adjustable feet. Remove any obstructions. |
| Rak kendur atau runtuh. | Exceeded weight capacity; shelves not properly seated on supports. | Reduce the weight on the shelf, ensuring it does not exceed 45 kg. Re-seat the shelf firmly onto the metal support profiles. |
| Parts appear damaged upon arrival. | Kerosakan penghantaran. | Contact the retailer or manufacturer immediately for replacement parts. Do not attempt to assemble damaged components. |
Spesifikasi
- Jenama: Keter
- Nombor Model: 241543
- warna: Hitam
- Bahan: Resin (recycled plastic)
- Dimensi (L x W x H): 89 cm (width) x 54 cm (depth) x 188 cm (height) / 35 inches (width) x 21.2 inches (depth) x 74 inches (height)
- Berat produk: Kira-kira 25.6 kg (56.4 lbs)
- Kapasiti Rak: 45 kg (99 paun) setiap rak
- Jumlah Kapasiti: 135 kg (297 lbs)
- Rak: 3 adjustable interior shelves with metal profiles
- ciri-ciri: Adjustable feet, soft-touch handles, padlockable doors (padlock not included), reinforced bottom.
- Masa Perhimpunan: Lebih kurang 15 minit
- Asal: Dibuat di Itali
Image: Diagram showing the cabinet's dimensions in inches (71.26" H x 34.65" W x 17.72" D).
Image: Diagram showing the cabinet's dimensions in centimeters (188cm H x 89cm W x 54cm D).
Waranti dan Sokongan
Maklumat Waranti:
Specific warranty details are not provided in the product information. Please refer to the product packaging or contact Keter customer service for warranty terms and conditions.
Sokongan Pelanggan:
For further assistance, missing parts, or inquiries, please visit the official Keter website or contact their customer support directly. You can also visit the Keter Brand Store on Amazon untuk maklumat lanjut.
