Amico 3 Head LED Security Light with Motion Sensor (Model PD-1711)

1. Pengenalan

This manual provides comprehensive instructions for the safe installation, operation, and maintenance of your Amico 3 Head LED Security Light with Motion Sensor. Please read this manual thoroughly before installation and retain it for future reference. Proper installation and adherence to safety guidelines are crucial for optimal performance and user safety.

Maklumat Keselamatan

• Sentiasa matikan kuasa pada pemutus litar sebelum pemasangan atau servis.
• Pemasangan hendaklah dilakukan oleh juruelektrik bertauliah atau orang yang biasa dengan pembinaan dan pengendalian produk serta bahaya yang terlibat.
• Pastikan semua sambungan elektrik mematuhi kod dan ordinan tempatan.
• Jangan pasang pada permukaan yang tidak kukuh dari segi struktur.
• Avoid looking directly into the LED light source when illuminated.

2. Ciri-ciri Produk

The Amico 3 Head LED Security Light is designed for outdoor use, offering adjustable lighting and motion detection capabilities.

• Kecerahan Tinggi & Kecekapan Tenaga: Outputs 40W, 4000 Lumens, 5000K (Daylight White) equivalent to 200W halogen light, reducing electricity consumption.
• Tiga Mod Pencahayaan: Features Motion Detection, Dusk-to-Dawn (D2D), and Always-On modes for versatile operation.
• Adjustable Motion Sensor: 180-degree swiveling angle with a detection distance of up to 75 feet.
• Tahan Lama & Tahan Cuaca: IP65 waterproof rating protects against rain, sleet, or snow. Constructed with aluminum for excellent heat dissipation and extended lifespan.
• Kepala Lampu Boleh Laras: Three independently adjustable light heads allow for broad and customized light coverage.

3. Kandungan Pakej

Sahkan bahawa semua komponen hadir sebelum memulakan pemasangan:

• Amico 3 Head LED Security Light Unit
• Pendakap Pemasangan
• Skru Pemasangan
• Kacang Kawat
• EVA Pad (for waterproofing)
• Manual Arahan

4. Arahan Pemasangan

Follow these steps for a secure and functional installation. Ensure power is OFF at the circuit breaker before starting.

1. Sediakan Permukaan Pemasangan: Ensure the junction box is securely installed and accessible.
2. Pasang Pendakap Pelekap: Fasten the provided mounting bracket to the existing junction box using the supplied screws. Ensure it is firmly attached.
3. Pass Wires Through EVA Pad: Carefully thread the electrical wires from the light fixture through the center hole of the EVA pad. This pad helps create a waterproof seal.
4. Sambungan Wayar: Connect the wires from the light fixture to the corresponding wires from the junction box using the wire nuts.
   • Green wire (from light) to Green wire (ground from junction box)
   • Black wire (from light) to Black wire (hot from junction box)
   • White wire (from light) to White wire (neutral from junction box)

   Note: Improper wiring may cause the light to be slightly bright even when off.
5. Pasang Lekapan Lampu: Align the light fixture with the mounting bracket. Pass the screw through the hole on the light body, align with the hole in the mounting bracket, and tighten securely.
6. Seal the Hole: Block the screw hole with the provided rubber plug to maintain the light's waterproof integrity.
7. Adjust Light Heads and Sensor: Adjust the three light heads and the motion sensor to your desired angles for optimal coverage.

Panduan Video Pemasangan

5. Mod Operasi

The Amico Security Light offers three distinct operating modes, controlled by switches and dials on the motion sensor unit. Refer to the diagram below for control locations.

Tetapan Mod:

• Mod Pengesanan Pergerakan: The light activates when motion is detected within its range and turns off after a set time. Adjust the 'DISTANCE' dial to H (High), M (Medium), or L (Low) for sensitivity, and the 'TIME' dial to 1, 3, or 10 minutes for illumination duration.
• Dusk-to-Dawn (D2D) Mode: The light automatically turns on at dusk and off at dawn. To activate, set the 'DISTANCE' dial to 'D2D' and the 'TIME' dial to your desired duration (1, 3, or 10 minutes). The light will remain on for the set duration after dusk.
• Mod Sentiasa Hidup: For continuous illumination, set the 'DISTANCE' dial to 'D2D' and the 'TIME' dial to 'TEST'. The light will remain on until manually switched off or the settings are changed. This mode can also be controlled by a wall switch.

Operating Modes Video Guide

6. Penyelenggaraan

Regular maintenance ensures the longevity and optimal performance of your security light.

• Pembersihan: Periodically clean the light heads and motion sensor lens with a soft, damp kain. Jangan gunakan pembersih atau pelarut yang melelas.
• Pemeriksaan: Annually inspect the wiring and mounting for any signs of wear, damage, or loose connections. Ensure the waterproof seals are intact.
• Faktor Persekitaran: Keep the motion sensor clear of obstructions like tree branches or debris that could interfere with its detection capabilities.

7. Penyelesaian masalah

If you encounter issues with your Amico Security Light, refer to the following common problems and solutions:

8. Spesifikasi

9. Maklumat Waranti

The Amico 3 Head LED Security Light (Model PD-1711) comes with a 5-year limited warranty. For specific terms and conditions, please refer to the warranty card included in your product packaging or contact Amico customer support.

10. Sokongan Pelanggan

For any questions, technical assistance, or warranty claims, please contact Amico customer support through the official Amico webtapak atau maklumat hubungan yang diberikan dalam pembungkusan produk anda.