ADJ HYD100

American DJ HYDRO BEAM X1 User Manual

Model: HYD100

1. Pengenalan

Terima kasih kerana membeliasing the American DJ HYDRO BEAM X1. This professional IP65-rated moving head beam fixture is designed for outdoor use, featuring a powerful 100W Osram Sirius HRI discharge lamp that produces a razor-sharp 3-degree beam. This manual provides essential information for the safe installation, operation, and maintenance of your unit. Please read these instructions thoroughly before operating the fixture to ensure proper use and to prolong its lifespan.

2. Maklumat Keselamatan

Sentiasa patuhi langkah berjaga-jaga keselamatan berikut untuk mengurangkan risiko kebakaran, kejutan elektrik atau kecederaan diri:

  • Keselamatan Elektrik: Pastikan bekalan kuasa voltage matches the fixture's requirements. Always disconnect from power before servicing or cleaning.
  • Pembumian: This fixture must be properly grounded to prevent electric shock.
  • Penggunaan Luaran: The HYDRO BEAM X1 is IP65 rated for outdoor use. Ensure all connections are securely sealed with their rubber protective covers when used outdoors.
  • Pemasangan: Always mount the fixture securely using appropriate clamps and safety cables. Ensure the mounting surface can support the fixture's weight.
  • haba: Allow adequate ventilation around the fixture. Do not operate in enclosed spaces. Maintain a minimum distance of 0.5 meters from flammable materials.
  • Keselamatan Mata: Avoid direct eye exposure to the light source. Never look directly into the beam.
  • Servis: Rujuk semua servis kepada kakitangan perkhidmatan yang berkelayakan. Jangan cuba membaiki unit sendiri.

3. Kandungan Pakej

Sahkan bahawa pakej anda mengandungi item berikut:

  • 1 x American DJ HYDRO BEAM X1 Moving Head Beam Light
  • 1 x Power Cable (IP65 rated)
  • 1 x Manual Pengguna (dokumen ini)
  • 2 x Omega Brackets with Quick-Lock Fasteners

4. Produk Lebihview

The HYDRO BEAM X1 is a robust and versatile moving head fixture. Key features include a 100W LED light source, precise pan and tilt movement, a 3-degree beam angle, and an IP65 rating for environmental protection. It supports DMX512 control and offers wireless DMX capabilities.

Depan view of the American DJ HYDRO BEAM X1 moving head light

Rajah 4.1: Depan view of the HYDRO BEAM X1, showing the light output lens and control panel.

The rear panel features all necessary connections, including 5-pin DMX In/Out, locking power In/Out, and a USB port for software updates. All connections are IP65 rated with rubber protective covers to ensure water and dust resistance.

belakang view of the American DJ HYDRO BEAM X1 showing input/output connections

Rajah 4.2: Belakang view of the HYDRO BEAM X1, highlighting the DMX, power, and USB connections.

The fixture also includes a 16-facet circular prism with overlay and an independent frost filter for wash effects, allowing for diverse visual outputs.

Illustration of 16-facet circular prism and frost filter effects

Figure 4.3: Visual representation of the 16-facet circular prism effect (left) and the frost filter for wash effects (right).

5. Persediaan

5.1 Pemasangan

The HYDRO BEAM X1 can be mounted in various positions (truss, floor, wall) using the included Omega brackets. Always ensure the fixture is securely fastened and use a safety cable as a secondary attachment.

  • Attach the Omega brackets to the bottom of the fixture using the quick-lock fasteners.
  • Secure the brackets to a truss or other suitable mounting structure using appropriate clamps (tidak termasuk).
  • Always attach a safety cable from the fixture to the mounting structure.

5.2 Sambungan Kuasa

Connect the supplied IP65-rated power cable to the locking power input on the rear of the fixture. Ensure the power source matches the voltage requirements specified on the fixture.

5.3 Sambungan DMX (Pilihan)

For DMX control, connect a 5-pin DMX cable from your DMX controller to the DMX IN port of the first fixture. For multiple fixtures, daisy-chain DMX cables from the DMX OUT of one fixture to the DMX IN of the next. Ensure all DMX connections are sealed with their rubber covers.

5.4 Persediaan DMX Tanpa Wayar

The HYDRO BEAM X1 features built-in wireless DMX. Refer to the fixture's internal menu for wireless DMX pairing instructions. Typically, this involves setting a common wireless DMX address or group for all fixtures and the transmitter.

6. Arahan Operasi

The HYDRO BEAM X1 is controlled via a digital display and four buttons: MENU, UP, DOWN, and ENTER. These buttons allow navigation through the menu options and adjustment of settings.

6.1 Panel Kawalan

  • MENU: Accesses the main menu or returns to the previous menu level.
  • ATAS BAWAH: Menavigasi pilihan menu atau melaraskan nilai parameter.
  • MASUK: Confirms a selection or saves a setting.

6.2 Pengalamatan DMX

To control the fixture via DMX, you must set a unique DMX start address for each unit. Use the control panel to navigate to the DMX Address setting and adjust the value. Consult your DMX controller's manual for channel assignments and programming.

6.3 Mod Saluran DMX

The HYDRO BEAM X1 offers multiple DMX channel modes (e.g., 14-channel, 16-channel). Select the desired mode via the control panel to match your DMX controller's setup. Each mode provides different levels of control over the fixture's features (Pan, Tilt, Dimmer, Strobe, Color, Gobo, Prism, Frost, Focus, etc.).

6.4 Operasi Kendiri

The fixture can operate without a DMX controller using its built-in programs:

  • Auto Program Mode: Select from various pre-programmed light shows. Adjust speed and other parameters via the menu.
  • Mod Aktif Bunyi: The fixture will react to sound via its internal microphone. Adjust sensitivity as needed.

7. Penyelenggaraan

Regular maintenance ensures optimal performance and extends the life of your HYDRO BEAM X1.

  • Pembersihan: Bersihkan bahagian luar secara berkalaasing, lenses, and cooling fins with a soft, lint-free cloth. For stubborn dirt, use a mild glass cleaner. Ensure the fixture is powered off and cool before cleaning.
  • Kemas kini Firmware: Check the American DJ website for available firmware updates. Updates can be installed via the USB port on the rear of the fixture. Follow the instructions provided with the firmware update package.
  • Pemeriksaan: Periksa kabel kuasa, kabel DMX dan perkakasan pelekap secara berkala untuk sebarang tanda haus atau kerosakan. Gantikan komponen yang rosak dengan segera.
  • Storan: When not in use, store the fixture in a dry, dust-free environment, preferably in its original packaging or a suitable flight case.

8. Penyelesaian masalah

If you encounter issues with your HYDRO BEAM X1, refer to the following common problems and solutions:

MasalahKemungkinan PuncaPenyelesaian
Lekapan tidak boleh dihidupkanNo power supply; Faulty cable; Internal fuse blownCheck power connection; Test cable; Contact service for fuse replacement.
Tiada kawalan DMXIncorrect DMX address; Faulty DMX cable; Incorrect DMX mode; DMX terminator missingVerify DMX address; Check/replace DMX cables; Ensure DMX mode matches controller; Use a DMX terminator on the last fixture.
Fixture not responding to wireless DMXNot paired; Interference; Transmitter issueRe-pair the fixture with the wireless DMX transmitter; Check for sources of interference; Verify transmitter operation.
Movement is erratic or restrictedMechanical obstruction; Calibration issue; DMX signal problemCheck for obstructions; Perform a fixture calibration via the menu; Verify DMX signal integrity.
Output cahaya malap atau tidak konsistenDirty lens; LED degradation; Internal faultClean the lens; Contact service if LED performance is degraded.

9. Spesifikasi

CiriSpesifikasi
Nombor ModelHYD100
Sumber Cahaya100W Osram Sirius HRI Discharge Lamp
Sudut Rasuk3 darjah
Saluran DMXMultiple DMX channel modes available
KawalanDMX512, Wireless DMX, Standalone (Auto, Sound Active)
Sambungan5-pin DMX In/Out, Locking Power In/Out, USB Port
Penarafan IPIP65 (Tahan Habuk dan Air)
Dimensi Produk17 x 14.5 x 21 inci (43.18 x 36.83 x 53.34 cm)
Berat Barang2 paun (0.91 kg)
PengeluarDJ Amerika
Tarikh Mula-mula Tersedia9 Januari 2019

10. Waranti dan Sokongan

American DJ products are backed by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official American DJ website. For technical support, service, or parts, please contact American DJ customer service. They offer exceptional customer support and have over 35 years of experience in the industry.

Maklumat Hubungan: Sila layari www.adj.com for the latest support information, contact details, and service centers.