Manual Pengguna Lampu Pemasangan Magnetik LED Berarah ECCO ED0016R

1. Pengenalan

1.1 Produk Selesaiview

The ECCO ED0016R is a directional LED light designed for various warning and safety applications. It features 18 red LEDs, a magnetic mounting base for easy attachment to ferrous surfaces, and is powered by four AA batteries. Its compact and durable design makes it suitable for temporary or portable use.

Image of the ECCO ED0016R Directional LED Magnetic Mount Light, showcasing its red LEDs and magnetic base.

1.2 Tujuan Penggunaan

This device is intended for use as a temporary warning or directional light in industrial, commercial, or personal safety environments. It is designed to provide high visibility to alert others to potential hazards or direct traffic flow. It is not intended for permanent installation or as a primary safety device without additional safety measures.

1.3 Kandungan Pakej

• 1 x ECCO ED0016R Directional LED Magnetic Mount Light

Nota: 4 AA batteries are required for operation and are not included in the package.

2. Maklumat Keselamatan Penting

Please read and understand all safety instructions before operating this product. Failure to follow these instructions may result in injury or damage to the product.

• Jauhkan peranti daripada kanak-kanak.
• Do not disassemble, modify, or attempt to repair the device. This will void the warranty and may cause damage or injury.
• Ensure the magnetic mount is securely attached to a clean, flat, ferrous surface before operation. Verify stability to prevent the light from falling.
• Jangan dedahkan peranti kepada suhu yang melampau, cahaya matahari langsung untuk tempoh yang lama, atau kelembapan berlebihan.
• Use only the specified battery type (AA).
• Insert batteries with correct polarity (+/-) as indicated inside the battery compartment.
• Jangan campurkan bateri lama dan baharu, atau jenis bateri yang berlainan.
• Remove depleted batteries promptly to prevent leakage and damage.
• Buang bateri mengikut peraturan tempatan.

2.1 Amaran Cadangan 65 California

AMARAN: Produk ini boleh mendedahkan anda kepada bahan kimia yang diketahui oleh Negeri California boleh menyebabkan kanser dan kecacatan kelahiran atau bahaya pembiakan lain. Untuk maklumat lanjut pergi ke www.P65Warnings.ca.gov.

3. Persediaan

3.1 Pemasangan Bateri

1. Cari penutup petak bateri pada peranti.
2. Open the cover by sliding or unscrewing it, as applicable.
3. Insert four (4) AA batteries, ensuring the positive (+) and negative (-) terminals align with the markings inside the compartment.
4. Tutup penutup petak bateri dengan selamat.

3.2 Memasang Cahaya

The ECCO ED0016R features a magnetic base for easy attachment.

1. Ensure the desired mounting surface is clean, dry, and made of a ferrous material (e.g., steel).
2. Place the magnetic base of the light firmly onto the surface.
3. Verify that the light is securely attached and will not dislodge due to vibrations or movement.

4. Operasi

4.1 Menghidupkan/Mematikan

Untuk mengendalikan lampu:

• Cari butang kuasa pada peranti.
• Press the power button once to turn the light ON.
• Tekan butang kuasa sekali lagi untuk mematikan lampu.

5. Penyelenggaraan

5.1 Penggantian Bateri

When the light dims or ceases to function, it is time to replace the batteries. Follow the steps outlined in Section 3.1 Battery Installation to replace the four AA batteries.

5.2 Pembersihan

Untuk membersihkan peranti:

• Ensure the device is turned off and batteries are removed if performing a thorough cleaning.
• Lap permukaan luar dengan lembut, damp kain.
• Jangan gunakan pembersih yang melelas, pelarut atau bahan kimia yang keras, kerana ini boleh merosakkan kemasan atau komponen dalaman.
• Ensure the device is completely dry before reinstalling batteries or operating.

6. Penyelesaian masalah

If you encounter issues with your ECCO ED0016R light, refer to the following troubleshooting guide:

• Lampu tidak menyala:
  • Check if batteries are installed correctly with the proper polarity.
  • Ensure batteries are not depleted. Replace with new AA batteries if necessary.
  • Pastikan penutup petak bateri ditutup dengan selamat.
• Cahaya malap atau berkelip-kelip:
  • Batteries may be low. Replace all four AA batteries with new ones.
• Light does not stay mounted:
  • Pastikan permukaan pelekap bersih, kering dan bebas daripada serpihan.
  • Verify the surface is made of a ferrous material suitable for magnetic attachment.
  • The surface may be too thin or have insufficient ferrous content. Try a different mounting location.

7. Spesifikasi

8. Waranti dan Sokongan

For warranty information, technical support, or service inquiries regarding your ECCO ED0016R Directional LED Magnetic Mount Light, please contact ECCO customer service directly. Refer to the official ECCO webtapak atau pembungkusan produk untuk maklumat hubungan terkini.

Please have your model number (ED0016R) and purchase details available when contacting support.