Manual Pengguna Pengawal Suhu Sensitif Sentuh Subzero SZ-7569T

1. Pengenalan

This manual provides comprehensive instructions for the installation, setup, operation, and maintenance of the Subzero SZ-7569T Touch Sensitive Temperature Controller. Please read this manual thoroughly before using the device to ensure proper function and safety. Keep this manual for future reference.

2. Produk Lebihview

The Subzero SZ-7569T is a precise, touch-sensitive temperature controller designed for various industrial and scientific applications. It features a clear digital display and intuitive touch controls for easy temperature management.

Figure 1: Subzero SZ-7569T Front Panel
The image displays the front panel of the Subzero SZ-7569T temperature controller. It features a black casing with a bright red digital LED display showing '28°C'. To the left, the 'sub-zero' brand name is visible. On the right, there are touch-sensitive buttons for 'Up' (arrow), 'Power' (circle with line), 'PRG' (program) with a 'Down' arrow, and 'SET' (set). A snowflake icon is also visible next to the temperature reading, indicating a cooling function.

3. Spesifikasi

4. Pemasangan

Proper installation is crucial for the accurate and safe operation of the temperature controller. It is recommended that installation be performed by a qualified technician.

1. Pemutusan Kuasa: Ensure all power to the installation area is disconnected before beginning any wiring.
2. Pemasangan: Mount the controller in a secure, dry location away from direct heat sources, excessive vibration, or corrosive environments. Ensure adequate ventilation.
3. Pendawaian: Connect the power supply, temperature sensor, and controlled device (e.g., heater, cooler) to the appropriate terminals on the controller. Refer to the wiring diagram provided with the product packaging for specific connections. Ensure all connections are secure and correctly polarized.
4. Peletakan Sensor: Position the temperature sensor in the area where temperature control is required, ensuring it accurately reflects the desired measurement point and is not influenced by external factors.
5. Sambungan Kuasa: Once all wiring is complete and verified, restore power to the system.

Warning: Incorrect wiring can lead to device malfunction, damage, or electrical hazards. Always consult the detailed wiring diagram.

5. Persediaan Awal

After installation, perform the following steps for initial setup:

1. Hidupkan kuasa: Tekan ke ⏻ (Power) button to turn on the device. The display will illuminate.
2. Check Sensor Reading: Verify that the display shows a plausible temperature reading. If an error code appears, refer to the Troubleshooting section.
3. Tetapan Akses: Tekan ke SET button to enter the temperature setting mode.
4. Adjust Setpoint: Gunakan ⌃ (Naik) dan ⌄ (Down) buttons to adjust the desired temperature setpoint.
5. Confirm Setpoint: Tekan SET again to confirm the new setpoint and exit the setting mode.
6. Program Mode (PRG): For advanced settings such as hysteresis, calibration, or alarm limits, press the PRG button. Navigate through parameters using the Up/Down arrows and confirm changes with SET. Consult the full programming guide for detailed parameter descriptions.

6. Operasi

The Subzero SZ-7569T operates automatically once the setpoint and parameters are configured. The display shows the current measured temperature.

• Paparan suhu: The large digital display continuously shows the current temperature measured by the sensor.
• Cooling/Heating Indicator: A snowflake icon (❅) or similar indicator will illuminate when the cooling or heating output is active, depending on the configured mode.
• Adjusting Setpoint During Operation: Tekan sebentar SET, kemudian gunakan ⌃ (Naik) atau ⌄ (Down) to change the setpoint. Press SET sekali lagi untuk berjimat.
• Hidupkan/Mati Kuasa: Tekan dan tahan butang ⏻ (Power) button for a few seconds to turn the device off or on.

7. Penyelenggaraan

Regular maintenance ensures the longevity and accuracy of your Subzero SZ-7569T temperature controller.

• Pembersihan: Lap paparan dan casing dengan lembut, damp cloth. Do not use abrasive cleaners, solvents, or excessive moisture, as these can damage the touch panel or internal components.
• Pemeriksaan Sensor: Periodically check the temperature sensor for any signs of damage or corrosion. Ensure it is securely in place.
• Sambungan: Occasionally inspect wiring connections to ensure they remain tight and free from corrosion.
• Pemeriksaan Penentukuran: If accuracy is critical, periodically verify the controller's readings against a calibrated reference thermometer. Recalibrate if necessary, following the instructions in the programming guide.

Caution: Always disconnect power before performing any maintenance that involves opening the device or accessing internal wiring.

8. Penyelesaian masalah

This section addresses common issues you might encounter with the Subzero SZ-7569T.

Jika anda menghadapi masalah yang tidak disenaraikan di sini atau jika penyelesaian yang dicadangkan tidak menyelesaikan masalah, sila hubungi khidmat pelanggan.

9. Waranti dan Sokongan

The Subzero SZ-7569T Touch Sensitive Temperature Controller is covered by a standard manufacturer's warranty against defects in materials and workmanship. Please refer to the warranty card included with your product for specific terms and conditions, including the warranty period.

For technical support, service, or warranty claims, please contact PVR Control customer service. Ensure you have your product model number (SZ-7569T) and purchase details available when contacting support.

Pengeluar: PVR Control
model: SZ-7569T