1. Pengenalan
This manual provides essential information for the safe and efficient operation of your Y&H 60A PWM Solar Charge Controller. Please read these instructions carefully before installation and use to ensure optimal performance and longevity of the product.
2. Arahan Keselamatan
- Pastikan bateri mempunyai volum yang mencukupitage untuk pengawal mengenali jenis bateri sebelum pemasangan pertama.
- Kabel bateri hendaklah sesingkat mungkin untuk mengurangkan kerugian.
- The regulator is only suitable for lead-acid batteries (OPEN, AGM, GEL). It is not suitable for nickel metal hydride, lithium-ion, or other batteries.
- Pengatur cas hanya sesuai untuk mengatur modul suria. Jangan sesekali menghubungkan sumber pengecasan lain ke pengatur cas.
3. Ciri-ciri Produk
- Built-in industrial micro-controller.
- Large LCD display with adjustable parameters for float charge voltage, vol rendahtage discharge, low resistance, and load timer.
- Dual USB output (5V/2A) for charging mobile devices.
- Fully automatic PWM charge management.
- Multiple protection functions: power-off memory, over-heat, low voltage discharge, short circuit, open circuit, overload, and overcharge protection.
- MOSFET reverse current protection, low heat production.
4. Persediaan dan Pemasangan
Follow these steps for proper connection of the solar charge controller:
- Connect the battery to the charge regulator (plus and minus).
- Connect the photovoltaic module to the regulator (plus and minus).
- Connect the consumer to the charge regulator (plus and minus).
Important: Reverse order applies when uninstalling!
An improper sequence can damage the controller!
Figure 4.1: Connection diagram for the Y&H 60A Solar Charge Controller.
Video 4.2: Demonstration of connecting a solar charge controller to a battery and solar panel. Note: This video features a similar product from a different brand, but the connection principles are applicable.
5. Arahan Operasi
5.1. LCD Display and Key Functions
The large LCD screen displays all parameters. The controller features three buttons for navigation and settings:
- Butang MENU: Short press to switch between different display interfaces. Long press for 3 seconds to enter the settings page.
- Butang KE ATAS: Tekan untuk meningkatkan nilai.
- Butang TURUN: Tekan untuk mengurangkan nilai.
The display shows various parameters including battery voltage, solar panel charging status, load status, accumulated charge/discharge ampere-hours, ambient temperature, and load mode.
Figure 5.1: LCD display interfaces and parameter adjustment flow.
5.2. Tetapan Parameter
Untuk melaraskan parameter:
- Long press the MENU button for 3 seconds to enter the settings page.
- Use the UP/DOWN buttons to adjust the desired value.
- Long press the MENU button again to save the setting and exit.
Parameters that can be adjusted include float charge voltage, vol rendahtage disconnect, low voltage reconnect, and load timer settings.
Video 5.2: Demonstration of LCD display navigation and parameter adjustment on a Y&H 60A Solar Charge Controller. Note: The video title mentions MPPT, but this product is a PWM controller. The display and setting functions are generally similar.
5.3. Dual USB Output
The controller is equipped with dual 5V/2A USB ports, allowing for convenient charging of mobile phones, tablets, and other USB-powered devices.
Figure 5.3: Charging a smartphone using the controller's dual USB ports.
6. Penyelenggaraan
To ensure the long-term performance and reliability of your solar charge controller, regular maintenance is recommended:
- Keep the controller clean and free from dust and debris.
- Periksa semua sambungan wayar secara berkala untuk memastikan ia selamat dan bebas daripada kakisan.
- Pastikan pengudaraan yang mencukupi di sekitar pengawal untuk mengelakkan terlalu panas.
7. Penyelesaian masalah
Rujuk jadual di bawah untuk isu biasa dan penyelesaiannya:
| Situasi | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Ikon cas tidak menyala ketika cerah | Solar panel opened / Wiring set again | Sambung semula |
| Load icon on | Bateri lemah | Isi semula |
| Muatkan ikon berkelip perlahan | Over load / Short circuit protection | Reduce load watts / Remove short circuit, 1 minute or automatic recovery |
| Matikan kuasa | Battery too low / protection | Periksa bateri/sambungan |
8. Spesifikasi
| Ciri | Nilai |
|---|---|
| Model | RBL-60A |
| Bateri Voltage | 12V / 24V Auto |
| Caj Arus | 60A |
| Arus Pelepasan | 30A |
| Input Suria Maksimum | 12V battery: 23V; 24V battery: 46V |
| Penyamaan | 14.4V |
| Caj Terapung | 13.7V (boleh laras) |
| Hentian Pelepasan | 10.7V (boleh laras) |
| Lepaskan semula | 12.6V (boleh laras) |
| Output USB | 5V/2A (MAX) |
| Makan sendiri | <10mA |
| Suhu Operasi | -35°C hingga +60°C |
| Saiz/Berat | 19.3 x 19.3 x 9.8 cm / 360 g |
| Pengeluar | Y&H |
| ASIN | B07L6GD5JB |
| UPC | 721821482959 |
9. Waranti dan Sokongan
For warranty information or technical support, please contact the manufacturer, Shenzhen Yonghui Fashion Co., Ltd, or refer to the product's purchase platform for specific details.
