1. Pengenalan
Terima kasih kerana membeliasing the Audiolab M-ONE Integrated Amplifier. The M-ONE is a compact yet powerful stereo integrated amplifier featuring an advanced DSD Digital-to-Analog Converter (DAC) and Bluetooth connectivity. It is designed to deliver high-fidelity audio performance from a variety of digital and analog sources, making it a versatile centerpiece for your audio system.
This manual provides essential information for the safe and optimal operation of your M-ONE unit. Please read it thoroughly before use and retain it for future reference.
2. Maklumat Keselamatan
Sila patuhi langkah berjaga-jaga keselamatan berikut untuk mengelakkan kejutan elektrik, kebakaran atau kerosakan pada unit:
- Sumber Kuasa: Connect the unit only to an AC power source of the type indicated on the rear panel. Ensure the voltage adalah betul untuk wilayah anda.
- Pengudaraan: Ensure adequate ventilation. Do not block ventilation openings or place the unit on soft surfaces that may impede airflow. Maintain a minimum distance of 10cm (4 inches) around the unit for proper heat dissipation.
- Air dan Kelembapan: Jangan dedahkan unit kepada hujan, lembapan, titisan atau percikan. Jangan letakkan objek yang diisi dengan cecair, seperti pasu, pada unit.
- haba: Jangan letakkan unit berhampiran sumber haba seperti radiator, daftar haba, dapur, atau radas lain (termasuk amppenghidup) yang menghasilkan haba.
- Objek Asing: Do not insert any objects into the unit's openings. If a foreign object enters the unit, disconnect the power cable immediately and contact qualified service personnel.
- Servis: Jangan cuba servis produk ini sendiri. Rujuk semua perkhidmatan kepada pegawai perkhidmatan yang berkelayakan.
- Pembersihan: Cabut plag unit daripada soket dinding sebelum membersihkan. Gunakan kain lembut dan kering sahaja. Jangan gunakan pembersih cecair atau aerosol.
3. Kandungan Pakej
Carefully unpack the unit. The carton should contain:
- Audiolab M-ONE Integrated Amplebih hidup
- Kabel Kuasa AC
- Alat Kawalan Jauh
- Kabel USB
- Manual Pengguna (dokumen ini)
Jika ada item yang hilang atau rosak, sila hubungi pengedar anda dengan segera.
4. Produk Lebihview
4.1 Panel Depan
Rajah 4.1: Depan view of the Audiolab M-ONE, showing the OLED display, two rotary controls, headphone jack, and power button.
- Output Fon Kepala: Bicu 6.3mm untuk menyambungkan fon kepala.
- SEL (Selector) Knob: Rotates to select input sources. Press to confirm selection or enter menu.
- Paparan OLED: Shows current input, volume level, and menu information.
- VOL (Volume) Knob: Rotates to adjust volume level. Press to mute/unmute.
- Butang Kuasa: Press to turn the unit on or off (standby mode).
- M-ONE Indicator: LED light indicating power status.
4.2 Panel Belakang
Rajah 4.2: Belakang view of the Audiolab M-ONE, displaying various input and output terminals, including power, speaker outputs, digital inputs (Coaxial, Optical, USB), and analog inputs (AUX).
- Suis kuasa: Suis HIDUP/MATI kuasa utama.
- Masuk Kuasa AC: Connects to the supplied AC power cable.
- Terminal Pembesar suara: Connect your passive loudspeakers here. Ensure correct polarity (+ to + and - to -).
- Input Digital:
- COAXIAL: Digital coaxial input.
- OPTIKAL: Digital optical (Toslink) input.
- USB B: USB Type B input for connecting to a computer.
- Analog Inputs (AUX): RCA stereo inputs for analog sources.
- Pencetus 12V: Untuk kawalan kuasa yang disegerakkan dengan komponen serasi yang lain.
5. Persediaan
5.1 Penempatan
Place the M-ONE on a stable, level surface away from direct sunlight, heat sources, and excessive moisture. Ensure there is sufficient space around the unit for proper ventilation, especially above the top panel.
5.2 Sambungan Pembesar suara
Connect your passive loudspeakers to the speaker terminals on the rear panel. Ensure that the positive (+) terminal of the M-ONE is connected to the positive (+) terminal of your speaker, and the negative (-) terminal of the M-ONE is connected to the negative (-) terminal of your speaker. Use high-quality speaker cables for optimal performance.
Awas:
- Ensure the M-ONE is powered off before making any speaker connections.
- Do not short-circuit the speaker terminals.
5.3 Sambungan Sumber
Sambungkan sumber audio anda kepada input yang sesuai pada panel belakang:
- Digital Sources (CD Player, Streamer, TV): Use coaxial, optical, or USB cables to connect to the respective digital inputs. For computer connection, use the USB B input.
- Analog Sources (Turntable with Phono Preamp, Tape Deck): Use RCA cables to connect to the AUX inputs.
5.4 Sambungan Kuasa
Once all audio connections are made, connect the supplied AC power cable to the AC power inlet on the rear panel of the M-ONE and then to a suitable wall outlet.
6. Arahan Operasi
6.1 Hidupkan/Mati Kuasa
First, ensure the main power switch on the rear panel is in the 'ON' position. Then, press the Power Button on the front panel to switch the M-ONE from standby to operational mode. Press it again to return to standby.
6.2 Pemilihan Input
Putar SEL knob on the front panel to cycle through the available input sources (e.g., COAX, OPT, USB, AUX, BT). The selected input will be displayed on the OLED screen. Press the SEL tombol untuk mengesahkan pilihan anda.
6.3 Kawalan Kelantangan
Putar VOL knob on the front panel clockwise to increase the volume and counter-clockwise to decrease it. The current volume level will be shown on the OLED display. Press the VOL knob to mute or unmute the audio output.
6.4 Berpasangan Bluetooth
Untuk menyambungkan peranti Bluetooth:
- Select the 'BT' input using the SEL knob. The display will show "BT Pairing".
- Pada peranti mudah alih anda (telefon pintar, tablet, dll.), dayakan Bluetooth dan cari peranti yang tersedia.
- Select "Audiolab M-ONE" from the list of devices.
- Once paired, the display will indicate a successful connection, and you can now stream audio wirelessly to the M-ONE.
6.5 DAC Functionality
The M-ONE features a high-performance DSD DAC. When a digital input (COAX, OPT, USB) is selected, the M-ONE will automatically process the digital audio signal. For USB connection to a computer, you may need to install specific drivers, which can typically be found on the Audiolab website. Refer to your computer's audio settings to select the M-ONE as the output device.
6.6 Output Fon Kepala
Connect your headphones to the 6.3mm headphone jack on the front panel. When headphones are connected, the loudspeaker output will automatically be muted.
6.7 Navigasi Menu dan Tetapan
The M-ONE offers various settings accessible via the OLED display and rotary controls. Press and hold the SEL knob to enter the main menu. Use the SEL knob to navigate through options and the VOL knob to change values. Press SEL to confirm or exit a submenu. Available settings may include:
- Penapis Digital: Select different digital filter characteristics for the DAC.
- Kecerahan Paparan: Laraskan kecerahan paparan OLED.
- Standby Timer: Set a timer for automatic standby.
- Volume on Power On: Configure the initial volume level when the unit powers on.
7. Penyelenggaraan
To ensure the longevity and optimal performance of your Audiolab M-ONE, follow these maintenance guidelines:
- Pembersihan: Use a soft, dry, lint-free cloth to clean the exterior surfaces. Do not use abrasive cleaners, waxes, or solvents, as these can damage the finish.
- Pengudaraan: Periodically check that the ventilation slots are clear of dust and debris. Use a soft brush or a vacuum cleaner with a brush attachment to gently remove any accumulation.
- Sambungan: Ensure all cables are securely connected. Loose connections can lead to poor audio quality or intermittent issues.
- Storan: If storing the unit for an extended period, disconnect it from the power supply and store it in a cool, dry place, preferably in its original packaging.
8. Penyelesaian masalah
If you experience issues with your M-ONE, consult the following table before contacting service personnel:
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Tiada kuasa | Power cable not connected; Rear power switch off; Unit in standby. | Check power cable connection; Ensure rear power switch is ON; Press front panel power button. |
| Tiada suara dari pembesar suara | Incorrect input selected; Volume too low; Speakers not connected; Mute activated; Headphones connected. | Select correct input; Increase volume; Check speaker connections; Press VOL knob to unmute; Disconnect headphones. |
| Tiada suara dari fon kepala | Headphones not fully inserted; Volume too low; Mute activated. | Ensure headphones are fully inserted; Increase volume; Press VOL knob to unmute. |
| Bluetooth tidak berpasangan | M-ONE not in pairing mode; Device too far; Interference. | Select BT input; Ensure M-ONE is discoverable; Move device closer; Reduce interference. |
| Bunyi herot | Source signal too high; Speaker impedance mismatch; Damaged cables. | Reduce source volume; Check speaker impedance compatibility; Inspect and replace cables if necessary. |
9. Spesifikasi
The following specifications are typical for the Audiolab M-ONE:
- Kuasa Output: 80 watts per channel (into 8 ohms)
- Input Digital: Coaxial, Optical, USB Type B
- Input Analog: RCA (AUX)
- Kesambungan Tanpa Wayar: Bluetooth
- DAC: DSD compatible
- Dimensi (L x W x H): 13.7 x 11.5 x 4.4 inci (34.8 x 29.2 x 11.2 cm)
- Berat: 16.58 paun (7.52 kg)
- Voltage: 12 Volts (Internal power supply handles AC100-115V/50-60Hz)
- Pengeluar: Audiolab
- Nombor Model: M-SATU
Catatan: Spesifikasi boleh berubah tanpa notis.
10. Waranti dan Sokongan
Audiolab products are manufactured to the highest standards and are designed for reliable performance. This product is covered by a limited warranty, the terms of which may vary by region. Please refer to the warranty card included with your product or contact your local Audiolab dealer or distributor for specific warranty details.
For technical support, troubleshooting assistance beyond this manual, or service inquiries, please contact your authorized Audiolab dealer or visit the official Audiolab webtapak untuk maklumat hubungan.
Webtapak: www.audiolab.co.uk
