1. Pengenalan
This manual provides detailed instructions for the setup, operation, and maintenance of your SCHWAIGER UFB100U533 Universal TV Remote Control. This remote is designed to control a wide range of televisions from various manufacturers, offering a convenient replacement or secondary control option.
2. Produk Lebihview dan Ciri
The SCHWAIGER UFB100U533 is a universal remote control pre-programmed for compatibility with most Samsung, LG, Sony, Philips, and Panasonic televisions. It features a comprehensive set of buttons for common TV functions and includes a learning capability for additional customization.
Ciri-ciri Utama:
- Keserasian Universal: Controls 99% of TV devices from major brands including Samsung, LG, Sony, Philips, and Panasonic.
- Tiada Persediaan Diperlukan: For pre-programmed brands, the remote is ready to use immediately after battery insertion.
- Fungsi Pembelajaran: Ability to learn up to 10 additional keys from an existing remote control.
- Kawalan Komprehensif: Equipped with 49 keys covering essential functions such as volume, program selection, numeric input, and brand-specific special functions.
- Teknologi Inframerah: Operates via infrared signals with a maximum range of 10 meters.
Imej 1: Depan view of the SCHWAIGER UFB100U533 Universal TV Remote Control, showing all 49 buttons including power, input, numeric keypad, channel/volume controls, menu, guide, navigation, and colored function buttons.
3. Persediaan
3.1 Pemasangan Bateri
- Cari petak bateri di belakang alat kawalan jauh.
- Luncurkan penutup petak bateri ke bawah atau tekan selak dan angkat untuk membuka.
- Insert two (2) AAA alkaline batteries, ensuring the correct polarity (+ and -) as indicated inside the compartment.
- Gantikan penutup petak bateri, pastikan ia terpasang dengan selamat pada tempatnya.
Imej 2: belakang view of the SCHWAIGER UFB100U533 remote control, displaying the battery compartment cover and product information label.
3.2 Penggunaan Awal
The SCHWAIGER UFB100U533 remote control is pre-programmed for most Samsung, LG, Sony, Philips, and Panasonic televisions. After installing the batteries, point the remote at your TV and test basic functions such as Power, Volume, and Channel. If your TV responds, no further setup is required for these basic functions.
4. Arahan Operasi
4.1 Basic TV Control
The remote control features standard buttons for common television functions:
- Butang kuasa (●): Menghidupkan atau mematikan TV.
- HDMI / SOURCE: Selects input sources (e.g., HDMI 1, HDMI 2, AV).
- Pad Kekunci Berangka (0-9): Pemilihan saluran langsung.
- VOL +/-: Melaraskan kelantangan ke atas atau ke bawah.
- CH +/-: Menukar saluran ke atas atau ke bawah.
- MENU: Mengakses menu utama TV.
- PANDUAN: Memaparkan panduan program elektronik (EPG).
- Navigation Buttons (▲ ◀ ▼ ▶): Menavigasi melalui menu.
- OK: Mengesahkan pilihan.
- PULANG / KELUAR: Kembali ke skrin sebelumnya atau keluar dari menu.
- Butang Berwarna (A, B, C, D): Often used for specific functions in smart TV apps or teletext.
- P.MODE / S.MODE / P.SIZE / DUAL: Special function buttons, their exact function may vary by TV model and brand.
Imej 3: bersudut view of the SCHWAIGER UFB100U533 remote control, providing a clear perspective of the button layout and ergonomic design.
4.2 Learning Function (Up to 10 Keys)
The remote control can learn functions from your original TV remote. This is useful for functions not pre-programmed or for specific features of your TV. You can program up to 10 keys.
- Penyediaan: Place the SCHWAIGER remote and your original TV remote on a flat surface, facing each other, with their infrared emitters aligned and approximately 1-3 cm apart.
- Masukkan Mod Pembelajaran: Tekan dan tahan butang kuasa butang dan OK button simultaneously on the SCHWAIGER remote for approximately 3 seconds until the LED indicator light (usually near the power button) illuminates steadily.
- Select Key to Learn: Press the button on the SCHWAIGER remote that you wish to program (e.g., a specific input button). The LED indicator will start blinking slowly.
- Hantar Isyarat: Press and hold the corresponding button on your original TV remote. The LED indicator on the SCHWAIGER remote should blink rapidly, then illuminate steadily, indicating successful learning.
- Repeat for Other Keys: Repeat steps 3 and 4 for any other keys you wish to program (up to 10).
- Keluar dari Mod Pembelajaran: Tekan ke kuasa button on the SCHWAIGER remote to exit learning mode. The LED indicator will turn off.
Nota: If the LED indicator blinks rapidly and then turns off without illuminating steadily, the learning process may have failed. Ensure the remotes are properly aligned and try again. Some remote controls use different infrared frequencies or protocols, which may prevent successful learning for certain buttons.
5. Penyelenggaraan
- Pembersihan: Gunakan kain lembut dan kering untuk membersihkan alat kawalan jauh. Jangan gunakan pembersih cecair atau bahan yang melelas.
- Penggantian Bateri: Replace batteries when the remote's response becomes sluggish or stops working. Always replace both batteries at the same time with new AAA alkaline batteries.
- Storan: Simpan alat kawalan jauh di tempat yang sejuk dan kering jauh dari cahaya matahari langsung dan suhu yang melampau.
Imej 4: Pro sampinganfile of the SCHWAIGER UFB100U533 remote control, illustrating its ergonomic shape and slim design.
6. Penyelesaian masalah
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Jauh tidak berfungsi. | Dead or incorrectly inserted batteries. Obstruction between remote and TV. Remote is out of range. | Check battery polarity and replace batteries if necessary. Remove any obstructions. Ensure you are within 10 meters of the TV. |
| Specific buttons do not respond. | Button not pre-programmed for your TV model. Learning function failed for that button. | Attempt to use the learning function to program the specific button. Ensure your TV is compatible with the remote's pre-programmed functions. |
| Learning function fails. | Remotes not aligned correctly. Original remote batteries low. Incompatible IR frequency. | Ensure remotes are 1-3 cm apart and emitters are aligned. Replace batteries in the original remote. Some specific functions may not be learnable due to technical differences. |
7. Spesifikasi
- Jenama: SCHWAIGER
- model: UFB100U533
- Teknologi Ketersambungan: Inframerah
- Peranti Serasi: Television (Universal for Samsung, LG, Sony, Philips, Panasonic)
- Jenis Bateri: 2 x AAA Alkali (tidak termasuk)
- Bilangan Butang: 49
- Julat Maksimum: 10 Meter
- Warna produk: Hitam
- Berat Barang: 1.2 Kilogram (Note: This weight is unusually high for a remote control and likely refers to the packaged shipping weight. The remote itself is significantly lighter.)
8. Waranti dan Sokongan
For warranty information or technical support, please refer to the documentation provided with your purchase or contact SCHWAIGER customer service directly. Contact details can typically be found on the manufacturer's official webtapak atau pada pembungkusan produk.
Sila simpan bukti pembelian anda untuk sebarang tuntutan waranti.
