1. Pengenalan
The Luceco Solar LED Projector is a powerful and efficient outdoor lighting solution designed for various applications such as paths, gardens, carports, and awnings. It operates entirely on solar energy, eliminating the need for external wiring and reducing energy costs. Equipped with an integrated PIR motion detector, it enhances security by illuminating areas upon detecting movement. This manual provides detailed instructions for installation, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your solar projector.
Figure 1: The Luceco Solar LED Projector, showcasing its solar panel and LED light array.
Figure 2: The projector's modern design and neutral white light (4000K) for clear and precise illumination.
2. Maklumat Keselamatan
Please read all safety instructions carefully before installing or operating the product. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- Ensure the product is installed in a location that receives direct sunlight for optimal charging.
- Do not attempt to disassemble, repair, or modify the product. This will void the warranty and may cause damage or injury.
- Keep the product away from flammable materials and extreme heat sources.
- The product is IP65 rated for outdoor use and resistance to weather conditions. However, avoid submerging it in water.
- Clean the solar panel regularly to ensure efficient charging. Use a soft, damp kain.
- Buang produk dan baterinya secara bertanggungjawab mengikut peraturan tempatan.
3. Kandungan Pakej
Sahkan bahawa semua komponen terdapat dalam pakej:
- 1 x Luceco Solar LED Projector
- 1 x Pendakap Pelekap Dinding
- Perkakasan Pemasangan (skru, palam dinding)
4. Persediaan dan Pemasangan
The Luceco Solar LED Projector is designed for easy installation with no wiring required. Follow these steps for optimal placement and mounting:
4.1 Memilih Lokasi Pemasangan
- Select a location that receives maximum direct sunlight throughout the day to ensure the solar panel charges effectively.
- Avoid areas shaded by trees, buildings, or other obstructions.
- Consider the desired illumination area and the PIR motion sensor's detection range (1-6 meters, 120°) when choosing the height and angle.
4.2 Memasang Projektor
- Position the wall mount bracket against the desired surface (exterior wall, fence, etc.).
- Tandakan titik penggerudian melalui lubang pada pendakap.
- Drill holes at the marked points using an appropriate drill bit (e.g., 8mm for supplied wall plugs).
- Masukkan palam dinding ke dalam lubang yang digerudi.
- Align the bracket with the holes and secure it using the provided screws.
- Attach the solar LED projector to the mounted bracket, ensuring it is securely fastened.
- Adjust the angle of the solar panel and the light head to optimize sunlight exposure and illumination coverage.
Figure 3: The simple installation process, requiring minimal tools and no complex wiring.
Figure 4: The robust and reliable design, featuring IP65 weather resistance for year-round outdoor use.
5. Arahan Operasi
The Luceco Solar LED Projector features intelligent operation modes and a PIR motion sensor for enhanced functionality.
5.1 Pengecasan Awal
Before first use, allow the solar projector to charge in direct sunlight for at least 6-8 hours to ensure the internal lithium-ion battery is sufficiently charged.
5.2 Mod Pengendalian
The projector offers three adjustable motion modes to suit different security and lighting needs. These modes are typically selected via a switch or button on the unit (refer to the specific product for exact control location):
- Twilight Mode: The light automatically turns on at dusk and remains on at a low brightness level. When motion is detected, it switches to full brightness for a set duration, then returns to low brightness.
- Mod Keselamatan: The light remains off until motion is detected. It then illuminates at full brightness for a set duration (e.g., 20-30 seconds) and turns off completely when no motion is detected.
- Mod Kehadiran: Similar to Security Mode, but may offer variations in brightness or duration. (Specific details may vary by model, consult product packaging for precise settings).
Figure 5: The projector offers long-duration lighting with two distinct modes, optimizing battery life.
Sensor Gerakan 5.3 PIR
The integrated Passive Infrared (PIR) motion sensor detects heat signatures of moving objects within its detection range (1-6 meters) and angle (120°). When motion is detected, the light activates according to the selected operating mode. Ensure the sensor is not obstructed and is positioned to cover the desired detection area.
Figure 6: The integrated PIR motion sensor detects movement up to 6 meters, instantly activating the light.
Figure 7: The projector providing effective illumination when installed on an exterior wall.
6. Penyelenggaraan
Regular maintenance helps ensure the longevity and optimal performance of your Luceco Solar LED Projector.
- Membersihkan Panel Suria: Lap panel solar secara berkala dengan lembut, damp kain untuk menanggalkan habuk, kotoran dan serpihan. Panel yang bersih memastikan penyerapan cahaya matahari dan kecekapan pengecasan maksimum.
- Cleaning the Light Head: Gently clean the LED light head and motion sensor lens with a soft, dry cloth to maintain clear illumination and sensor sensitivity.
- Penjagaan Bateri: The integrated lithium-ion battery is designed for long life. Avoid prolonged periods of storage in a completely discharged state. If storing for an extended time, ensure the battery is fully charged.
- Pemeriksaan: Occasionally check the mounting hardware to ensure it remains secure.
Figure 8: The projector's weather-resistant design ensures durability even in challenging outdoor conditions.
7. Penyelesaian masalah
If you encounter issues with your solar LED projector, refer to the following table for common problems and solutions:
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Lampu tidak menyala pada waktu malam. | Caj solar tidak mencukupi. | Pastikan panel solar berada di bawah cahaya matahari langsung selama 6-8 jam setiap hari. Bersihkan panel solar. |
| Cahaya berkelip atau malap. | Cas bateri rendah. | Allow more charging time in direct sunlight. |
| Penderia gerakan tidak mengesan. | Sensor terhalang atau kotor. | Clean the sensor lens. Ensure no obstructions are blocking the sensor's view. |
| Lampu kekal menyala secara berterusan. | Incorrect mode selected or constant motion. | Check the selected operating mode. Ensure there is no continuous motion in the detection area. |
8. Spesifikasi
Technical specifications for the Luceco Solar LED Projector:
| Ciri | Spesifikasi |
|---|---|
| Jenama | Luceco |
| Nombor Model | LEXSF6B40-01 |
| Dimensi (L x W x H) | 1.33 x 8.56 x 5.88 cm (Product); 8.6L x 1.3W x 5.9H cm (Fixture) |
| Berat badan | 620 gram |
| Sumber Kuasa | Berkuasa Suria |
| Wattage | 5 Watt |
| Fluks Bercahaya | 550 lumen |
| Suhu Warna | 4000 Kelvin (Putih Neutral) |
| Indeks Paparan Warna (CRI) | 80 |
| Jenis Bateri | 2 x 3.7V, 1500 mAh Lithium-ion (included) |
| Penarafan IP | IP65 (kalis air) |
| Tukar Gaya | Pengesan Pergerakan |
| Purata Jangka Hayat | 30,000 Jam |
| bahan | Aluminium Die-cast |
| Jenis Selesai | Dilukis |
| Ciri Khas | Waterproof, PIR Motion Sensor |
9. Waranti dan Sokongan
Information regarding specific warranty terms and software updates for this product is not available in this manual. For warranty claims, technical support, or inquiries about spare parts, please contact Luceco customer service directly or refer to the product packaging for contact details. It is recommended to retain your proof of purchase for any warranty-related matters.
