pengenalan
This manual provides comprehensive instructions for the safe and efficient use of your Paulmann MaxLED 79797 RGBW Controller. This device allows you to control Paulmann MaxLED RGBW light strips, enabling functions such as switching, dimming, and changing light colors and effects via the included wireless remote control. The controller operates without requiring direct line-of-sight to the remote, offering a range of up to 30 meters.
Arahan Keselamatan Penting
- Baca semua arahan dengan teliti sebelum pemasangan dan operasi.
- Simpan manual ini untuk rujukan masa hadapan.
- This product is designed for indoor use only (IP20 rating). Do not expose to moisture or extreme temperatures.
- Pastikan bekalan kuasa diputuskan sambungannya sebelum sebarang kerja pemasangan atau penyelenggaraan.
- Only use with Paulmann MaxLED RGBW strips and compatible 24V power supplies.
- Do not attempt to open or modify the controller or remote control. This will void the warranty.
- Jauhkan bateri daripada kanak-kanak. Buang bateri terpakai dengan cara yang bertanggungjawab.
Kandungan Pakej
Sahkan bahawa semua komponen terdapat dalam pakej:
- 1x Paulmann MaxLED RGBW Controller (Model 79797)
- 1x Kawalan Jauh Tanpa Wayar
- 1x Assembly Instructions (this manual)
Image: The MaxLED RGBW Controller and its wireless remote control. The controller is a small white rectangular unit with a cable, and the remote is an oval-shaped white device with various buttons and a color wheel.
Image: Diagram showing the MaxLED RGBW Controller and remote control with their approximate dimensions. The controller measures 22.5x85x45mm and the remote 20x110x53mm. A 150mm cable connects the controller to the LED strip.
Persediaan dan Pemasangan
Follow these steps for proper installation of your MaxLED RGBW Controller:
- Sediakan Kawasan Pemasangan: Ensure the surface where the LED strip will be mounted is clean, dry, and free of dust.
- Sambungkan Jalur LED: Connect your Paulmann MaxLED RGBW strip to the output cable of the controller. The system uses an easy plug-in connection. Ensure the connectors are securely fastened.
- Sambungkan Bekalan Kuasa: Connect a compatible 24V Paulmann power supply (not included) to the input side of the MaxLED RGBW Controller.
- Pasang Pengawal: The controller is designed for hidden installation. Place it in a discreet location where it is protected from physical damage and moisture, but still allows for proper signal transmission from the remote (up to 30m range).
- Hidupkan kuasa: Once all connections are secure, plug the power supply into a suitable electrical outlet.
- Pairing the Remote Control (if necessary): The remote control is usually pre-paired. If not, refer to the "Operating Instructions" section for pairing procedures.
Image: This image illustrates the MaxLED expandable component system, highlighting three key aspects: "Easy to connect" (showing a hand connecting an LED strip), "Easy to mount" (showing an LED strip being applied to a surface), and "Easy to control" (showing the remote control). This demonstrates the simplicity of the setup process.
Arahan Operasi
The wireless remote control allows full command over your MaxLED RGBW strips.
Fungsi Kawalan Jauh:
Imej: A terperinci view of the MaxLED RGBW remote control, showing its various buttons and the central color wheel. The remote features power, brightness, mode, speed, and color selection controls.
- Butang kuasa (O): Press to turn the LED strips On or Off.
- Kawalan Kecerahan (B +/-): Use the '+' button to increase brightness and '-' to decrease brightness.
- Roda Warna: Touch the color wheel to select a desired static color for your LED strips.
- Mode Selection (M): Cycle through various pre-programmed light effects and color changing modes.
- Speed Control (S +/-): When in a dynamic mode, use the '+' button to increase the speed of the effect and '-' to decrease it.
Memadankan Alat Kawalan Jauh:
If your remote control is not responding, it may need to be paired with the controller:
- Pastikan pengawal dihidupkan.
- Within 3 seconds of powering on the controller, press and hold the "Mode" (M) button on the remote control for a few seconds.
- The LED strips should flash to indicate successful pairing.
Penyelenggaraan
Pembersihan:
To clean the controller and remote control, gently wipe with a soft, dry cloth. Do not use abrasive cleaners, solvents, or excessive moisture, as this can damage the components.
Penggantian Bateri Alat Kawalan Jauh:
The remote control requires batteries (type not specified in product data, typically CR2032 or similar button cell). If the remote's range decreases or it stops responding, replace the battery:
- Cari petak bateri di belakang alat kawalan jauh.
- Open the compartment using a small screwdriver or by sliding the cover.
- Tanggalkan bateri lama dan pasangkan yang baharu, pastikan kekutuban yang betul (+/-).
- Tutup petak bateri dengan selamat.
- Buang bateri lama mengikut peraturan tempatan.
Menyelesaikan masalah
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| LED strips do not light up. | No power, loose connection, faulty power supply, remote not paired. | Check power supply connection. Ensure all cables are securely plugged in. Verify power outlet is functional. Re-pair the remote control (see Operating Instructions). |
| Alat kawalan jauh tidak bertindak balas. | Dead battery, remote not paired, out of range. | Replace remote control battery. Re-pair the remote control. Move closer to the controller (within 30m). |
| Warna tidak betul atau tidak konsisten. | Loose connection to LED strip, faulty LED strip. | Check the connection between the controller and the LED strip. Ensure the strip is fully compatible. |
| Dimming or effects not working. | Remote control issue, incompatible LED strip. | Ensure the remote control battery is good and it is paired. Verify the LED strip is an RGBW dimmable type. |
Spesifikasi
| Jenama | Paulman |
| Nombor Model | 79797 |
| Dimensi Produk (L x W x H) | 5.3 x 11 x 2 cm (Controller); 20 x 110 x 53 mm (Remote) |
| Berat badan | 102 gram |
| Penarafan IP | IP20 (Kegunaan Dalaman Sahaja) |
| bahan | plastik |
| Maks. Wattage | 144 Watt |
| Voltage | 24 Volt |
| Jenis Sumber Cahaya | LED (for compatible strips) |
| Sumber Kuasa | AC (via external 24V power supply) |
| Ciri Khas | Dimmable, Variable Intensity, Remote Control, RGBW Color Change |
| Kekerapan Kawalan Jauh | 2.4 GHz RF |
| Julat Kawalan Jauh | Up to 30 meters (non-line-of-sight) |
| Bateri Diperlukan (Jauh) | Ya (tidak termasuk) |
Image: The MaxLED RGBW Controller and its remote control, emphasizing the 2.4 GHz RF wireless technology for reliable communication.
Waranti dan Sokongan
Waranti:
Paulmann offers a 1-year availability for spare parts for this product. For specific warranty terms and conditions, please refer to the official Paulmann webtapak atau hubungi peruncit anda.
Sokongan Pelanggan:
For further assistance, technical support, or inquiries regarding your Paulmann MaxLED RGBW Controller, please visit the official Paulmann website or contact their customer service department. Contact information can typically be found on the product packaging or the Paulmann webtapak.
Paulman Webtapak: www.paulmann.com
