pengenalan
This instruction manual provides essential information for the safe installation, operation, and maintenance of your Knightsbridge Screwless 6G Grid Faceplate, model GDSF006MB. Please read these instructions carefully before installation and retain them for future reference.
Maklumat Keselamatan Penting
AMARAN: Electrical installations should only be carried out by a qualified electrician in accordance with national wiring regulations. Always isolate the mains power supply before commencing any electrical work.
- Ensure the power supply is disconnected at the consumer unit/fuse board before installation.
- Produk ini direka untuk kegunaan dalaman sahaja.
- Jangan pasang pada damp or freshly plastered surfaces.
- Pastikan semua sambungan selamat dan berwayar dengan betul.
- This product is rated IP20, meaning it is protected against solid objects over 12.5mm, but has no protection against water.
Arahan Pemasangan
The Knightsbridge Screwless 6G Grid Faceplate is designed for easy installation over a compatible 6-gang grid module. Follow these steps for a secure and aesthetic finish.
- Prepare the Grid Module: Ensure your 6-gang grid module (not supplied) is correctly installed and wired into the wall box according to electrical regulations. The module should be securely fixed to the wall box.
- Attach the Faceplate Frame: The screwless faceplate consists of two parts: a main frame and a decorative front plate. Align the main frame with the grid module and secure it using the screws provided with your grid module. Ensure it is flush with the wall.
- Secure the Decorative Front Plate: Once the main frame is securely attached, carefully clip the decorative screwless front plate onto the main frame. Apply gentle, even pressure until it clicks into place. Ensure all edges are flush and there are no gaps.
Imej 1: Depan view of the Knightsbridge Screwless 6G Grid Faceplate. This image shows the six openings for grid modules and the sleek, screwless design.
Imej 2: Bersudut view of the Knightsbridge Screwless 6G Grid Faceplate, highlighting its slim profile and matt black finish.
Operasi
The screwless faceplate itself does not have operational functions. Its purpose is to provide a clean, aesthetic finish for your installed 6-gang grid modules (e.g., light switches, dimmer switches, or sockets). Once installed, the functionality is determined by the grid modules fitted within it.
To remove the decorative front plate for maintenance or access to the grid modules, carefully insert a small flat-head screwdriver into the notch at the bottom edge of the faceplate and gently pry it off. Exercise caution to avoid damaging the finish.
Penyelenggaraan dan Pembersihan
To maintain the appearance and functionality of your faceplate, follow these simple guidelines:
- Pembersihan: Lap permukaan dengan kain lembut dan kering. Untuk tanda degil, gunakan sedikit kainamp cloth with mild soap can be used, followed by drying with a clean, soft cloth.
- Elakkan: Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the matt black finish.
- Pemeriksaan: Periksa secara berkala untuk sebarang tanda kerosakan atau sambungan yang longgar. Jika sebarang masalah ditemui, rujuk juruelektrik bertauliah.
Menyelesaikan masalah
This section addresses common concerns related to the faceplate itself. For issues related to the electrical functionality of the grid modules, refer to their respective manuals or consult a qualified electrician.
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Plat muka tidak diletakkan rata. | Main frame not properly secured or wall box uneven. | Ensure the main frame is tightly screwed to the wall box. Check if the wall surface is even. |
| Decorative front plate does not clip on. | Salah jajaran atau halangan. | Re-align the front plate with the main frame. Check for any debris or obstructions preventing it from clicking into place. |
| Scratches or marks on the finish. | Abrasive cleaning or impact. | Avoid abrasive cleaners. Handle with care during installation and cleaning. Minor marks may be permanent. |
Spesifikasi
| Nombor Model: | GDSF006MB |
| Penerangan: | Screwless 6G Grid Faceplate |
| Selesai: | Matt Hitam |
| Bahan: | Premium Grade Steel (Alloy Steel) |
| Dimensi (H x W x D): | 148mm x 148mm x 3.5mm |
| Berat Bersih: | 0.09 kg (90 gram) |
| Penilaian IP: | IP20 |
| Manufactured in accordance with: | BS EN 60670-1 |
| Origin of Manufacture: | China |
Waranti
This Knightsbridge product comes with a Waranti 15 tahun from the date of purchase, covering manufacturing defects. This warranty does not cover damage caused by improper installation, misuse, abuse, or normal wear and tear. Please retain your proof of purchase for any warranty claims.
Sokongan dan Hubungan
For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact Knightsbridge customer support. Refer to the official Knightsbridge webtapak untuk maklumat hubungan yang paling terkini.
Knightsbridge: www.mlaccessories.co.uk
