Kidde i4618AC Hardwire Smoke Alarm User Manual

Produk Selesaiview

The Kidde i4618AC is an ionization smoke alarm designed for residential use. It operates on a 120V AC power source and includes a 9V battery backup for continuous protection during power outages. This model features an easy-access slide-load front battery door, simplifying battery replacement and activation.

It is interconnectable with up to 24 compatible devices, including other smoke, carbon monoxide (CO), and heat alarms, allowing for a synchronized alert system throughout your home. The alarm also includes a tamper-resist locking feature to prevent unauthorized removal.

Persediaan dan Pemasangan

Proper installation is crucial for the effective operation of your smoke alarm. Follow these steps carefully:

1. Pemutusan Kuasa: Before beginning installation, ensure that the power to the circuit where the alarm will be installed is turned off at the main fuse or circuit breaker box.
2. Pemasangan Asas Pemasangan: The large mounting base simplifies installation and helps cover any imperfections on the wall or ceiling surface. Secure the mounting base using appropriate screws (not included) into a ceiling joist or wall stud, or use suitable anchors if mounting to drywall.
3. Sambungan Pendawaian: The alarm comes with a pre-stripped wiring harness and an easy-off cap. Connect the alarm's wiring to your household electrical wiring (120V AC) according to local electrical codes. The tinned strands on the wiring harness are designed to increase conductivity and improve wire nut grip.
4. Pengaktifan Bateri: The front battery pull tab allows for battery activation without removing the alarm from its mounting bracket. Insert a fresh 9V battery into the front-loading battery door. Ensure correct polarity (+ to + and - to -).
5. Alarm Attachment: Once wiring and battery are in place, attach the smoke alarm unit to the mounting base by aligning the tabs and twisting clockwise until it locks securely.
6. Pemulihan & Pengujian Kuasa: Restore power to the circuit. The alarm should chirp once to indicate it has power. Press and hold the Test/Hush button to test the alarm. A loud, pulsating alarm should sound. If no alarm sounds, refer to the Troubleshooting section.

This image displays the Kidde i4618AC smoke alarm. The battery compartment is open, revealing a red 9V battery. The text on the alarm indicates "IMPORTANT: SEE OWNERS MANUAL FOR COMPLETE OPERATING INSTRUCTIONS" and "WARNING: MODELS WITHOUT BATTERY BACKUP". The battery itself is labeled "9V Battery For All Electronic Applications No. 1604P". The image highlights the easy-access front-loading battery door.

Arahan Operasi

Your Kidde i4618AC smoke alarm is designed for continuous operation and requires minimal user interaction under normal conditions.

• Operasi Biasa: The alarm continuously monitors for smoke. A small red LED indicator light will flash approximately once every 30-40 seconds to confirm that the alarm is receiving power and functioning correctly.
• Keadaan Penggera: In the event of smoke detection, the alarm will emit a loud, pulsating sound (three long beeps followed by a pause, repeated). The red LED will flash rapidly in conjunction with the alarm sound. If interconnected with other compatible alarms, all interconnected units will also sound.
• Mod Senyap: For nuisance alarms (e.g., from cooking smoke), press the large, centrally located Test/Hush button. This will temporarily silence the alarm for approximately 7-10 minutes. The red LED will flash every 10 seconds during Hush mode. The alarm will automatically reset after the Hush period, or sooner if smoke density increases.
• Ingatan Penggera: In an interconnected system, if one alarm triggers the others, the initiating alarm will flash its red LED every 1.5 seconds for approximately 10 minutes after the alarm condition has cleared. This feature helps identify the source of the alarm.
• Amaran Bateri Rendah: When the 9V battery backup is low, the alarm will chirp approximately once every 30-40 seconds. This indicates that the battery needs to be replaced immediately.

Penyelenggaraan

Regular maintenance ensures the continued reliability of your smoke alarm.

• Ujian Bulanan: Test your smoke alarm monthly by pressing and holding the Test/Hush button until the alarm sounds. This confirms the alarm's electronic circuitry, horn, and battery are working.
• Penggantian Bateri: Replace the 9V battery annually, or immediately when the low battery chirp sounds. Use only recommended 9V batteries. The front-loading battery door makes this process convenient.
• Pembersihan: Clean your smoke alarm at least once a year. Gently vacuum the alarm's cover and vents with a soft brush attachment to remove dust and debris. A dust cover is included to protect the sensor from contaminates during construction, reducing nuisance alarms. Do not paint the alarm.
• Alarm Replacement: Smoke alarms have a limited lifespan. It is recommended to replace your smoke alarms every 10 years from the date of manufacture. Refer to the date code on the back of the alarm.

Menyelesaikan masalah

If your smoke alarm is not functioning as expected, consult the following common issues:

For persistent issues not covered here, please contact Kidde customer support or consult a qualified electrician.

Spesifikasi

• Nombor Model: i4618AC
• Sumber Kuasa: 120V AC with 9V Battery Backup
• Jenis Sensor: Pengionan
• Dimensi Produk: 4.72 x 3.94 x 3.94 inci
• Berat: 3.04 paun
• Suhu Operasi: 40°F hingga 100°F (4.4°C hingga 37.8°C)
• Kesalinghubungan: Sehingga 24 peranti Kidde (18 peranti boleh dimulakan)
• Pengeluar: Kidde

Waranti dan Sokongan

For detailed warranty information, please refer to the warranty card included with your product packaging or visit the official Kidde website. If you require technical assistance or have questions regarding your Kidde i4618AC smoke alarm, please contact Kidde Customer Support.

Kidde Customer Support:

• Webtapak: www.kidde.com
• telefon: Rujuk pembungkusan produk atau webtapak untuk nombor hubungan terkini.