Globe Electric Wireless Plug-In Doorbell Kit - Model 18000083

1. Pengenalan

This manual provides instructions for the installation, operation, and maintenance of your Globe Electric Wireless Plug-In Doorbell Kit, Model 18000083. This kit includes one wireless chime unit and one wireless push button, designed to provide a convenient and reliable doorbell solution for your home. The chime unit offers three selectable tunes for the front entrance and a distinct ding for a secondary entrance.

Rajah 1: The Globe Electric Wireless Plug-In Doorbell Kit, featuring the main chime unit and the compact wireless push button. The chime unit is designed to plug directly into a standard wall outlet, and the push button is suitable for wall mounting.

2. Maklumat Keselamatan

• Baca semua arahan dengan teliti sebelum pemasangan dan operasi.
• Do not expose the push button to extreme temperatures, direct sunlight, or heavy rain for prolonged periods.
• Ensure the chime unit is plugged into a standard, easily accessible wall socket.
• Do not attempt to disassemble or repair the units yourself. Refer to qualified service personnel.
• Keep batteries (for push button) out of reach of children. Dispose of used batteries properly.

3. Kandungan Pakej

Sahkan bahawa semua komponen terdapat dalam pakej:

• 1 x Unit Loceng Tanpa Wayar
• 1 x Butang Tekan Tanpa Wayar
• Skru Pemasangan
• Pita Pemasangan
• sauh

4. Persediaan

4.1. Installing the Push Button

1. Pilih Lokasi: Choose a suitable location for the push button, typically near your front door. Ensure the surface is clean and dry. The transmission range is up to 150 ft (45 meters) from the chime unit.
2. Pasang Bateri: The push button requires a battery (not included). Open the push button casing (usually by prying open a small notch or unscrewing a cover) and insert the correct battery type, observing polarity. Close the casing dengan selamat.
3. Pilihan Pemasangan:
   • Using Mounting Tape: For a quick installation, apply the provided mounting tape to the back of the push button and firmly press it onto the desired surface for at least 30 seconds.
   • Menggunakan Skru dan Sauh: For a more secure installation, mark the desired screw holes on the wall. Drill pilot holes if necessary, insert the anchors, and then secure the push button with the provided screws.

4.2. Plugging in the Chime Unit

• Plug the wireless chime unit into any standard indoor wall socket. Ensure it is within the 150 ft (45 meters) transmission range of the push button.
• Avoid plugging the chime unit into an outlet controlled by a switch, as this may inadvertently turn off the doorbell.

4.3. Pairing (If Applicable)

Your Globe Electric Wireless Doorbell Kit is typically pre-paired at the factory. If the chime does not sound when the push button is pressed after installation, follow these steps to re-pair the units:

1. Plug in the chime unit.
2. Locate the pairing button on the chime unit (refer to the diagram if available, or look for a small button often labeled "Pair" or "Learn"). Press and hold this button for approximately 3-5 seconds until an indicator light flashes or a short tone is heard.
3. Within 10 seconds, press the wireless push button. The chime unit should sound, indicating successful pairing.
4. If pairing fails, repeat the steps.

5. Arahan Operasi

5.1. Selecting Chime Tunes

The chime unit offers three selectable tunes for the front entrance and a distinct "ding" for a secondary entrance (if a second push button is paired, though this kit includes only one). To change the tune for the primary push button:

• Locate the tune selection button on the chime unit (often labeled with a musical note or "Tune").
• Press this button repeatedly to cycle through the available melodies. The chime will play each tune as you select it.
• Stop pressing the button when you hear your desired tune. This tune will now be set for the paired push button.

5.2. Julat Penghantaran

The wireless doorbell system has a transmission range of up to 150 feet (approximately 45 meters) in open areas. Environmental factors such as thick walls, metal structures, or other wireless devices may reduce this range. Position the chime unit and push button to minimize obstructions for optimal performance.

6. Penyelenggaraan

6.1. Battery Replacement (Push Button)

When the push button's performance degrades (e.g., reduced range, inconsistent ringing), the battery may need replacement. The push button uses a standard battery type (e.g., CR2032 coin cell or A23 12V, check the specific model for exact type).

1. Buka butang tekan dengan berhati-hati casing.
2. Keluarkan bateri lama dan buang mengikut peraturan tempatan.
3. Masukkan bateri baharu jenis yang sama, pastikan kekutuban yang betul (+ dan -).
4. Tutup casing securely. Test the doorbell to confirm functionality.

6.2. Pembersihan

Clean the chime unit and push button with a soft, dry cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the plastic finish.

7. Penyelesaian masalah

8. Spesifikasi

9. Waranti & Sokongan

9.1. Maklumat Waranti

This Globe Electric Wireless Plug-In Doorbell Kit, Model 18000083, comes with a Waranti 1 Tahun dari tarikh pembelian. Waranti ini meliputi kecacatan bahan dan mutu kerja di bawah penggunaan biasa. Ia tidak meliputi kerosakan akibat salah guna, kemalangan, pengubahsuaian tanpa kebenaran atau pemasangan yang tidak betul.

Sila simpan bukti pembelian anda untuk tuntutan waranti.

9.2. Sokongan Pelanggan

For technical assistance, troubleshooting, or warranty inquiries, please contact Globe Electric customer support. Refer to the product packaging or the official Globe Electric website for the most current contact information (phone number, email, or support portal).

Apabila menghubungi sokongan, sila sediakan nombor model produk anda (18000083) dan bukti pembelian tersedia.