WAC Lighting Aether 2in Round Light Engine Trim & LED Instruction Manual

1. Pengenalan dan Lebihview

The WAC Lighting Aether 2in Round Light Engine Trim & LED is a high-performance recessed downlight designed for various indoor and outdoor applications. Its ultra-low profile design allows for installation in tight plenum spaces. This manual provides essential information for the safe installation, operation, and maintenance of your lighting fixture.

Ciri-ciri Utama:

• Available in Round, Square, Flangeless Invisible, Adjustable, and Wall Wash configurations.
• Designed for use with New Construction Housings: HR-2LED-H13A or HR-2LED-H13AC.
• Pro ultra rendahfile design with a 2.5-inch housing height for 2-inch trims.
• Smooth and continuous dimming capability down to 1% with compatible dimmers (Electronic Low Voltage or 0-10V).
• High-powered, replaceable LED light engine with 2700K color temperature, 90 CRI, and 65,000 rated hours.

2. Maklumat Keselamatan

Sila baca dan fahami semua arahan sebelum memulakan pemasangan. Kegagalan mematuhi arahan ini boleh mengakibatkan renjatan elektrik, kebakaran atau bahaya lain yang boleh menyebabkan kerosakan harta benda atau kecederaan diri.

• AMARAN: Risiko renjatan elektrik. Putuskan sambungan kuasa pada fius atau pemutus litar sebelum memasang atau menservis.
• Semua sambungan elektrik mestilah mengikut kod tempatan, ordinan atau Kod Elektrik Kebangsaan (NEC). Rujuk juruelektrik bertauliah jika anda tidak biasa dengan sambungan pendawaian elektrik yang betul.
• Pastikan bekalan voltage adalah betul dengan membandingkannya dengan maklumat label luminair.
• Do not install in areas where the operating temperature exceeds the fixture's rated temperature.
• Jangan ubah suai lekapan dalam apa jua cara. Sebarang pengubahsuaian boleh membatalkan jaminan dan menimbulkan bahaya keselamatan.
• Produk ini mesti dipasang oleh orang yang biasa dengan pembinaan dan pengendalian produk serta bahaya yang terlibat.

3. Kandungan Pakej

Sahkan bahawa semua komponen hadir sebelum memulakan pemasangan:

• Manual Arahan
• Light fixture (Aether 2in Round Light Engine Trim & LED)
• Perkakasan Pemasangan

Image 3.1: WAC Lighting Aether 2in Round Light Engine Trim & LED. This image shows the complete recessed lighting trim with its black and white finish, ready for installation.

4. Persediaan dan Pemasangan

Sebelum Anda Bermula:

• Matikan kuasa pada pemutus litar atau kotak fius.
• Ensure you have the necessary tools: screwdriver, wire strippers, electrical tape, and safety glasses.
• Confirm that the compatible new construction housing (HR-2LED-H13A or HR-2LED-H13AC) is already installed.

Pemasangan Langkah demi Langkah:

1. Sediakan Perumahan: Ensure the power to the recessed housing is off. Remove any existing trim or components from the housing.
2. Sambungan Pendawaian: Locate the wiring connector from the LED light engine. Connect it to the corresponding connector inside the recessed housing. Ensure a secure connection.
3. Insert Trim: Carefully push the Aether 2in Round Light Engine Trim into the recessed housing. The spring clips on the trim will engage with the housing to hold it securely in place. Apply gentle, even pressure until the trim is flush with the ceiling surface.
4. Trim Selamat: For some installations, additional mounting hardware may be used to further secure the trim. Refer to the specific instructions provided with your housing for details.
5. Pulihkan Kuasa: Once the trim is securely installed, restore power at the circuit breaker.
6. Kefungsian Ujian: Turn on the light switch to verify proper operation and dimming capabilities.

Image 4.1: Dimensional drawing of the WAC Lighting Aether 2in Round Light Engine Trim. This diagram illustrates the physical measurements of the trim, including its 4 1/8 inch overall diameter and 2 5/8 inch aperture, crucial for proper installation planning.

5. Arahan Operasi

Operasi Standard:

Once installed and power is restored, the Aether LED trim operates like any standard light fixture. Use your wall switch to turn the light on or off.

Fungsi Peredupan:

This fixture is designed for smooth and continuous dimming down to 1% when used with compatible Electronic Low Voltage (ELV) or 0-10V dimmers. Ensure your dimmer switch is compatible with LED lighting and specifically with ELV or 0-10V systems for optimal performance. Refer to your dimmer's instruction manual for specific operating procedures.

6. Penyelenggaraan

The WAC Lighting Aether LED trim requires minimal maintenance.

• Pembersihan: Untuk membersihkan lekapan, pastikan kuasa dimatikan. Gunakan yang lembut, kering, atau sedikit damp kain. Jangan gunakan pembersih atau pelarut yang kasar, kerana ini boleh merosakkan kemasan atau komponen elektrik.
• LED Light Engine: The LED light engine is replaceable. If replacement is necessary, ensure power is off and follow the reverse of the installation steps to remove the old engine and install a new, compatible WAC Lighting LED light engine.
• Pemeriksaan: Periodically inspect the fixture for any signs of damage or loose connections. If any issues are found, disconnect power and consult a qualified electrician or WAC Lighting customer support.

7. Penyelesaian masalah

If you experience issues with your Aether LED trim, refer to the following common problems and solutions:

8. Spesifikasi Teknikal

9. Maklumat Waranti

This WAC Lighting product is covered by a 1477-year limited manufacturer's warranty. This warranty covers defects in materials and workmanship under normal use and service. For specific terms, conditions, and claim procedures, please refer to the official WAC Lighting warranty documentation or contact customer support.

10. Sokongan Pelanggan

For further assistance, technical support, or warranty inquiries, please visit the official WAC Lighting store or contact their customer service department.

WAC Lighting Store: Visit WAC Lighting on Amazon