Sauter Marapi Electric Towel Dryer Radiator User Manual

1. Pengenalan

Thank you for choosing the Sauter Marapi Electric Towel Dryer Radiator. This manual provides essential information for the safe installation, operation, and maintenance of your appliance. Please read these instructions carefully before use and retain them for future reference.

The Sauter Marapi is designed to provide comfortable heating and efficient towel drying, featuring a powerful blower, an intuitive LCD screen, and programmable settings for optimal energy management.

2. Arahan Keselamatan

Penting: Kegagalan mematuhi arahan keselamatan ini boleh mengakibatkan renjatan elektrik, kebakaran atau kecederaan diri.

• This appliance is intended for domestic use only as a towel dryer and supplementary heater.
• Installation must be carried out by a qualified electrician in accordance with local wiring regulations and building codes, especially in bathrooms.
• Do not install the appliance directly below a socket outlet.
• Pastikan bekalan kuasa voltage sepadan dengan label penilaian pada perkakas.
• Do not cover the radiator or blower vents, as this can cause overheating and fire.
• Keep children and pets away from the appliance when it is in operation, as surfaces can become hot.
• Jangan rendamkan perkakas dalam air atau cecair lain.
• Jika kord bekalan rosak, ia mesti diganti oleh pengilang, ejen servisnya, atau orang yang berkelayakan yang serupa untuk mengelakkan bahaya.
• Perkakas ini tidak dimaksudkan untuk digunakan oleh orang (termasuk kanak-kanak) yang kurang keupayaan fizikal, deria atau mental, atau kurang pengalaman dan pengetahuan, melainkan mereka telah diberi pengawasan atau arahan mengenai penggunaan perkakas oleh orang yang bertanggungjawab untuk keselamatan mereka.

3. Produk Lebihview

The Sauter Marapi combines a stylish design with practical functionality. Familiarize yourself with the main components:

• Elemen Pemanas: Horizontal round tubes for towel drying and radiant heat.
• Blower: Located at the bottom, provides rapid heat for quick room warming.
• Panel Kawalan LCD: Displays temperature, mode, and programming settings.
• Butang Kawalan: For adjusting settings and navigating menus.

Figure 3.1: Sauter Marapi Electric Towel Dryer Radiator in a bathroom setting. This image shows the radiator mounted on a wall next to a sink and mirror, highlighting its integration into a modern bathroom environment. The radiator features multiple horizontal bars for hanging towels and a control panel on the upper right side.

Rajah 3.2: Depan view of the Sauter Marapi Electric Towel Dryer Radiator. This image provides a clear, head-on view of the appliance, showcasing its white finish, numerous round horizontal heating tubes, and the integrated LCD control panel on the right side. Three circular elements are visible at the top.

Rajah 3.3: Bersudut view of the Sauter Marapi Electric Towel Dryer Radiator. This perspective highlights the depth of the radiator and the design of its round heating tubes, which are suitable for hanging and drying towels. The LCD control panel is also visible on the side.

4. Persediaan dan Pemasangan

The Sauter Marapi radiator must be securely mounted to a wall and connected to the electrical supply. Due to the electrical nature and bathroom environment, professional installation is strongly recommended.

4.1 Pemasangan

• Choose a suitable wall location, ensuring adequate clearance from water sources (sinks, showers, bathtubs) as per local regulations (e.g., volume zones in bathrooms).
• Use the provided mounting bracket and hardware. Mark the drilling points accurately.
• Drill holes and insert appropriate wall plugs. Secure the mounting bracket firmly to the wall.
• Carefully lift the radiator and attach it to the mounting bracket. Ensure it is level and stable.

4.2 Sambungan Elektrik

• Amaran: Disconnect power at the main circuit breaker before attempting any electrical work.
• The appliance must be connected to a permanent electrical installation by a qualified electrician.
• Pastikan pembumian yang betul.
• The electrical connection should be protected by a residual current device (RCD) if required by local regulations.

5. Arahan Operasi

After proper installation and power connection, you can begin operating your Sauter Marapi radiator.

5.1 Hidupkan/Mati Kuasa

• Tekan ke kuasa button on the control panel to turn the appliance on or off.
• The LCD screen will illuminate when the unit is powered on.

5.2 Paparan dan Kawalan LCD

The LCD screen displays current temperature, operating mode, and programming status. Use the navigation buttons (e.g., Mod, +/-, Prog) to adjust settings.

5.3 Mod Pengendalian

Your radiator typically offers several operating modes:

• Mod Keselesaan: Maintains a set temperature for continuous comfort.
• Mod Eko: Mengekalkan suhu yang lebih rendah dan menjimatkan tenaga.
• Mod Perlindungan Fros: Prevents the room temperature from dropping below a critical level (e.g., 7°C).
• Mod Program: Follows a pre-set heating schedule.
• Blower Boost Mode: Activates the integrated blower for rapid heating for a set duration (e.g., 15-30 minutes).

Tekan ke Mod button to cycle through available modes. Use the +/- buttons to adjust the target temperature in Comfort or Eco modes.

5.4 Pengaturcaraan

The programmable feature allows you to set specific heating schedules for different times of the day and days of the week.

1. Tekan ke Prog butang untuk memasuki mod pengaturcaraan.
2. Gunakan Mod or arrow buttons to select the day and time segment you wish to program.
3. Gunakan +/- buttons to set the desired mode (Comfort, Eco, Off) for that segment.
4. Repeat for all desired time segments and days.
5. Tekan Prog again to exit and save the settings.

Refer to the detailed programming section in your full manual for advanced options and specific button functions.

6. Penyelenggaraan

Regular cleaning ensures optimal performance and extends the lifespan of your radiator.

• Pembersihan: Before cleaning, ensure the appliance is switched off and disconnected from the power supply. Allow it to cool completely. Wipe the surfaces with a soft, damp kain. Jangan gunakan pembersih yang melelas, pelarut atau bahan kimia yang keras, kerana ini boleh merosakkan kemasan.
• Blower Filter (if applicable): Some models may have a removable filter for the blower. Check your specific model's instructions for cleaning or replacing this filter.
• Pemeriksaan Am: Periodically check the power cord and plug for any signs of damage. If damage is found, contact a qualified technician for repair.

7. Penyelesaian masalah

If you encounter issues with your Sauter Marapi radiator, consult the following table before contacting customer support.

8. Spesifikasi

• Jenama: Sauter
• model: Marapi
• Nombor Model: 3410532201757
• Jenis: Electric Towel Dryer Radiator with Blower
• Output Kuasa: 1750 Watt
• Kawalan: LCD Screen, Programmable
• Berat: Kira-kira 27.25 kg
• ASIN: B07HGPKKJD

9. Waranti dan Sokongan

For warranty information, please refer to the warranty card included with your product or visit the official Sauter webtapak. Simpan bukti pembelian anda untuk tuntutan waranti.

If you require technical assistance, spare parts, or have questions not covered in this manual, please contact Sauter customer support. Contact details can typically be found on the manufacturer's webtapak atau pada pembungkusan produk anda.

Sauter Official Webtapak: www.sauter.fr (Sila sahkan serantau yang betul webtapak untuk sokongan.)