Manual Arahan Gergaji Bulat Pelbagai Bahan Evolution Power Tools R185CCS 7-1/4"

1. Pengenalan

This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your Evolution Power Tools R185CCS 7-1/4" TCT Multi-Material Cutting Circular Saw. Please read this manual thoroughly before using the tool and keep it for future reference.

The R185CCS Circular Saw is engineered with multi-material cutting technology, allowing it to cut mild steel, non-ferrous metals, wood (including wood with embedded nails), and plastic using a single blade. This design eliminates the need for frequent blade changes, streamlining your work process. When cutting mild steel, the saw produces minimal heat, no burrs, and virtually no sparks, resulting in clean, cool-to-touch cuts that are immediately workable.

Figure 1: Evolution R185CCS 7-1/4" Multi-Material Circular Saw

Ciri-ciri Utama:

• Accurate cuts to within +/- 0.5 degrees.
• 20-tooth TCT blade optimized for various materials.
• Reliable 100-hour motor life with endurance tested for 30,000 cuts.
• Powerful 15A motor with a hi-torque gearbox for extended motor and blade life.
• Safe operation with minimal heat, virtually no sparks, and an electronic brake that stops the blade in under 4 seconds.
• Lightweight design to reduce user fatigue.
• Ergonomic, textured, soft-grip handles for enhanced comfort and control.

2. Maklumat Keselamatan

Always observe basic safety precautions to reduce the risk of fire, electric shock, and personal injury when using power tools. Read and understand all instructions.

Amaran Keselamatan Alat Kuasa Am:

• Keselamatan Kawasan Kerja: Pastikan kawasan kerja bersih dan terang. Kawasan bersepah atau gelap mengundang kemalangan. Jangan kendalikan alatan kuasa dalam atmosfera yang mudah meletup, seperti di hadapan cecair mudah terbakar, gas atau habuk.
• Keselamatan Elektrik: Palam alat kuasa mesti sepadan dengan alur keluar. Jangan sekali-kali mengubah suai palam dalam apa jua cara. Elakkan sentuhan badan dengan permukaan yang dibumikan atau dibumikan. Jangan dedahkan alatan kuasa kepada hujan atau keadaan basah.
• Keselamatan Diri: Sentiasa pakai pelindung mata (cermin mata keselamatan atau gogal) dan pelindung pendengaran. Gunakan topeng habuk jika operasi menghasilkan habuk. Berpakaianlah dengan betul; elakkan pakaian atau barang kemas yang longgar. Jauhkan rambut, pakaian dan sarung tangan daripada bahagian yang bergerak.
• Penggunaan dan Penjagaan Alat: Jangan paksa alat kuasa. Gunakan alat kuasa yang betul untuk aplikasi anda. Putuskan sambungan palam daripada sumber kuasa sebelum membuat sebarang pelarasan, menukar aksesori atau menyimpan alatan kuasa.
• Specific Circular Saw Safety:
  • Jauhkan tangan daripada kawasan pemotongan dan bilah.
  • Do not reach underneath the workpiece when the blade is running.
  • Laraskan kedalaman pemotongan kepada ketebalan bahan kerja.
  • Jangan sekali-kali memegang bahan kerja di tangan anda atau di seluruh kaki anda semasa memotong. Selamatkan bahan kerja ke platform yang stabil.
  • Be aware that the saw produces metal chips when cutting metal; wear appropriate protective clothing and face shield.

Amaran Proposisi 65: Produk ini mungkin mengandungi bahan kimia yang diketahui oleh State of California yang menyebabkan barah dan cacat lahir atau bahaya pembiakan yang lain.

3. Persediaan dan Pemasangan

Before beginning any setup or assembly, ensure the saw is unplugged from the power source to prevent accidental startup.

Komponen yang Disertakan:

• Evolution R185CCS Circular Saw
• 7-1/4" TCT Multi-Material Blade (pre-installed or included separately)
• Blade wrench (for blade changes)
• Panduan tepi selari
• Penyesuai port habuk

Figure 2: Saw with accessories and examples of cuttable materials (wood, composite decking, ferrous metals, non-ferrous metals, laminates, plastics).

Blade Installation/Removal:

1. Pastikan gergaji telah dicabut daripada plagnya.
2. Tekan dan tahan butang kunci gelendong.
3. Use the provided blade wrench to loosen the blade bolt by turning it clockwise (for standard blades, check blade rotation arrow).
4. Lift the lower blade guard and remove the outer flange and blade.
5. Install the new blade, ensuring the rotation arrow on the blade matches the arrow on the saw's guard.
6. Replace the outer flange and tighten the blade bolt counter-clockwise with the wrench while holding the spindle lock.

Adjusting the Parallel Edge Guide:

The parallel edge guide helps maintain straight cuts. Insert the guide into the slot on the front of the saw base and secure it at the desired width using the locking screw.

Penyambungan Pengekstrakan Habuk:

Attach the dust port adapter to the saw's dust outlet. Connect a suitable vacuum cleaner or dust extraction system to the adapter to minimize dust and debris during operation.

4. Arahan Operasi

Always wear appropriate personal protective equipment (PPE) including eye protection, hearing protection, and gloves before operating the saw.

Melaraskan Kedalaman Pemotongan:

The cutting depth can be adjusted for different material thicknesses, up to 2-1/2 inches. Loosen the depth adjustment lever, move the base plate to the desired depth indicated on the scale, and then securely tighten the lever.

Figure 3: Adjustable depth of cut for plunge or trench cutting up to 2-1/2 inches.

Melaraskan Sudut Serong:

The saw allows for bevel cuts from 0° to 60°. Loosen the bevel adjustment knob, tilt the saw base to the desired angle on the bevel scale, and then securely tighten the knob.

Figure 4: 0°-60° bevel scale for accurate angle cuts.

Membuat Potongan:

1. Kencangkan benda kerja dengan kuat untuk mengelakkan pergerakan semasa memotong.
2. Ensure the blade is clear of the workpiece before starting the saw.
3. Hold the saw firmly with both hands using the main handle and the auxiliary handle.
4. Press the trigger to start the saw, allowing the blade to reach full speed before engaging the material.
5. Guide the saw smoothly through the material, maintaining a consistent feed rate. Do not force the saw.
6. Upon completing the cut, release the trigger and allow the blade to stop completely before lifting the saw from the workpiece. The electronic brake will stop the blade in under 4 seconds.

Figure 5: Demonstrating the saw's multi-material cutting capability on metal, wood with embedded nails, and plastic.

Memotong Bahan Berbeza:

• kayu: The saw is designed for clean and consistent smooth cutting in wood, even with embedded nails.
• logam: When cutting mild steel, the saw produces minimal heat, no burrs, and virtually no sparks. Ensure proper ventilation and wear a face shield in addition to eye protection due to hot metal chips.
• plastik: The saw can cut various plastics. Adjust feed rate to prevent melting.

5. Penyelenggaraan

Regular maintenance ensures the longevity and safe operation of your circular saw. Always unplug the tool before performing any maintenance.

Pembersihan:

• After each use, clean the saw to remove dust, chips, and debris. Use a soft brush or compressed air.
• Lap permukaan luar dengan iklanamp kain. Jangan gunakan bahan kimia atau pelarut yang keras.
• Ensure the blade guard mechanism is free of debris and operates smoothly.

Penjagaan Bilah:

• Inspect the blade regularly for sharpness, damage, or missing teeth. A dull or damaged blade can cause kickback and reduce cutting efficiency.
• Replace worn or damaged blades immediately with genuine Evolution Power Tools replacement blades.

Pemeriksaan Kord:

Periksa kord kuasa secara berkala untuk sebarang tanda kerosakan, potongan atau kekusutan. Jika rosak, dapatkan pembaikan oleh juruteknik servis yang berkelayakan.

6. Penyelesaian masalah

This section addresses common issues you might encounter with your circular saw. For problems not listed here, contact customer support.

7. Spesifikasi

8. Waranti dan Sokongan

Maklumat Waranti:

The Evolution Power Tools R185CCS Circular Saw comes with a Waranti Terhad 3 Tahun. Waranti ini melindungi kecacatan pada bahan dan mutu kerja di bawah penggunaan biasa. Sila simpan bukti pembelian anda untuk tuntutan waranti.

Rajah 6: Waranti Terhad 3 Tahun.

Sokongan Pelanggan:

For technical assistance, warranty claims, or to purchase replacement parts, please contact Evolution Power Tools customer support. Refer to the official Evolution Power Tools webtapak atau pembungkusan produk anda untuk mendapatkan maklumat hubungan terkini.

Pengeluar: Alat Kuasa Evolusi

Jenama: EVOLUSI