AeroCool Playa Slim Micro-ATX PC Case Instruction Manual

1. Pengenalan

This manual provides detailed instructions for the installation, operation, and maintenance of your AeroCool Playa Slim Micro-ATX PC Case. Please read this manual thoroughly before beginning assembly or operation to ensure proper functionality and safety.

Rajah 1: Depan view of the AeroCool Playa Slim PC Case showcasing its integrated RGB lighting strip.

The AeroCool Playa is a versatile slim PC case designed to support Micro-ATX motherboards. It features a compact design allowing for both horizontal and vertical positioning, and includes integrated RGB lighting with 13 distinct modes.

2. Maklumat Keselamatan

• Always disconnect the power supply from the wall outlet before performing any installation, maintenance, or cleaning.
• Handle internal components with care to avoid damage from static electricity. Consider using an anti-static wrist strap.
• Jauhkan bahagian kecil dan skru daripada kanak-kanak.
• Ensure proper ventilation around the PC case to prevent overheating.
• Avoid placing the PC case in direct sunlight or near heat sources.
• Do not attempt to modify the case or its components, as this may void your warranty and pose safety risks.

3. Kandungan Pakej

Sahkan bahawa semua item terdapat dalam pakej:

• AeroCool Playa Slim Micro-ATX PC Case
• Mounting Screws (for motherboard, drives, etc.)
• Manual Pengguna
• Vertical Stand Feet (for vertical orientation)

4. Spesifikasi

5. Persediaan dan Pemasangan

Follow these steps to assemble your PC components within the AeroCool Playa case.

5.1. Menyediakan Kes

1. Letakkan bekas di atas permukaan yang rata dan stabil.
2. Tanggalkan panel sisi dengan membuka skru ibu jari di bahagian belakang bekas dan luncurkan panel ke belakang.

Figure 2: Internal layout of the AeroCool Playa Slim PC Case, illustrating the motherboard mounting area and drive bays.

5.2. Pemasangan Papan Induk

1. Pasangkan pelindung I/O ke dalam bukaan belakang bekas.
2. Align your Micro-ATX motherboard with the standoffs inside the case. Ensure the standoffs match the screw holes on your motherboard.
3. Secure the motherboard using the provided mounting screws.

5.3. Pemasangan Unit Bekalan Kuasa (PSU).

The AeroCool Playa case supports SFX or Micro ATX power supplies, mounted at the bottom.

1. Position the PSU in the designated bottom mounting area.
2. Secure the PSU to the case using the appropriate screws from the accessory kit.
3. Route the PSU cables through the available cutouts for cable management.

5.4. Pemasangan Pemacu Storan

The case provides bays for 2.5" and 3.5" drives.

• 2.5" Drives (SSDs): Locate the 2.5" drive mounting points, typically behind the motherboard tray or on dedicated brackets. Secure the SSDs using the provided screws.
• 3.5" Drives (HDDs): The case may utilize the optical drive slot for a 3.5" HDD. If installing a 3.5" drive, follow the specific instructions for its mounting location.

5.5. Pemasangan Kad Pengembangan

1. Tanggalkan penutup slot pengembangan yang diperlukan dari bahagian belakang bekas.
2. Insert your expansion card (e.g., graphics card) into the appropriate PCIe slot on the motherboard.
3. Secure the expansion card with a screw. Note that due to the slim design, low-profile expansion cards are generally recommended.

Rajah 3: Belakang view of the PC case, highlighting the I/O shield area, power input, and horizontal expansion slots.

5.6. Pemasangan Kipas

The case includes one 80mm fan pre-installed at the top. Additional 80mm fans can be installed if desired.

1. Identify available fan mounting points (e.g., bottom, rear).
2. Secure the fans using the provided fan screws.
3. Connect the fan power cables to your motherboard or power supply.

5.7. Sambungan Panel Depan

Connect the front panel cables (USB 2.0, USB 3.0, audio, power switch, reset switch, LED indicators) to the corresponding headers on your motherboard. Refer to your motherboard manual for exact header locations.

5.8. Case Orientation

The AeroCool Playa case can be positioned horizontally or vertically. For vertical orientation, attach the included stand feet to the bottom of the case for stability.

Figure 4: The AeroCool Playa Slim PC Case configured for horizontal desktop placement.

6. Arahan Operasi

6.1. Menghidupkan

1. Ensure all internal components are securely installed and all cables are properly connected.
2. Sambungkan kabel kuasa ke PSU dan soket dinding.
3. Tekan butang kuasa yang terletak di panel hadapan casing.

6.2. Kawalan Pencahayaan RGB

The AeroCool Playa case features an integrated RGB lighting strip on the front panel with 13 selectable modes.

• Locate the dedicated RGB control button on the front panel.
• Press the button repeatedly to cycle through the 13 different lighting effects and colors.
• Hold the button for a few seconds to turn the RGB lighting off or on.

7. Penyelenggaraan

Penyelenggaraan tetap membantu memastikan prestasi optimum dan jangka hayat komponen PC anda.

• Pembersihan Habuk: Bersihkan habuk dari bahagian dalam bekas dan penapis kipas secara berkala menggunakan udara termampat atau berus lembut. Pastikan sistem dimatikan dan dicabut plagnya sebelum membersihkan.
• Pembersihan Luaran: Lap bahagian luar bekas dengan lembut, damp kain. Elakkan pembersih atau pelarut yang melelas.
• Pengurusan Kabel: Ensure internal cables are neatly routed to improve airflow and prevent interference with fans.

8. Penyelesaian masalah

Bahagian ini menangani isu biasa yang mungkin anda hadapi.

9. Waranti dan Sokongan

AeroCool products are manufactured to high quality standards. For warranty information, please refer to the warranty card included with your product or visit the official AeroCool webtapak.

For technical support or further assistance, please contact AeroCool customer service through their official channels. Keep your proof of purchase and model number (ACCS-PQ05014.11) ready when contacting support.