Innovations 208L-BK-M10-BK 2 Vertical Bath Vanity Light Instruction Manual

1. Produk Lebihview

The Innovations 208L-BK-M10-BK is a two-light vertical bath vanity fixture designed to provide ample illumination in bathroom settings. Featuring a modern style with a matte black finish, this fixture is constructed from durable alloy steel and brass, ensuring longevity and aesthetic appeal. It is suitable for damp locations, making it ideal for bathroom environments.

Imej 1: Depan view of the Innovations 208L-BK-M10-BK 2 Vertical Bath Vanity Light, showcasing its matte black finish and dual light design.

Ciri-ciri Utama:

• Two-light design for balanced illumination.
• Matte Black finish for a modern aesthetic.
• Constructed from durable Alloy Steel and Brass.
• Dimensions: 22.75 inches Height x 10.00 inches Width.
• Damp safety listing, suitable for bathroom use.

2. Maklumat Keselamatan

Please read and understand all instructions before beginning installation. Failure to follow these instructions may result in electric shock, fire, or other injuries that could be fatal or cause property damage.

• AMARAN: To avoid electric shock, disconnect power at the circuit breaker or fuse box before installation or servicing.
• Semua sambungan elektrik mestilah mengikut kod tempatan, ordinan atau Kod Elektrik Kebangsaan (NEC). Rujuk juruelektrik bertauliah jika anda tidak biasa dengan sambungan pendawaian elektrik yang betul.
• This fixture is rated for DAMP locations. Do not install in areas where it will be directly exposed to water.
• Use only incandescent bulbs with a maximum wattage of 60 watts per socket.
• Jangan melebihi wat maksimumtage dinyatakan.
• Handle the fixture with care. Avoid dropping or striking the fixture or its components.

3. Kandungan Pakej

Carefully unpack your new fixture and lay out all parts on a clear area. Ensure all components listed below are present before discarding any packing material.

• 1 x Innovations 208L-BK-M10-BK 2 Light Vertical Bath Vanity Light Fixture
• Perkakasan Pemasangan (skru, nat dawai, plat pemasangan)
• Arahan Pemasangan

4. Persediaan dan Pemasangan

Professional installation is recommended. If you are not familiar with electrical installations, please consult a qualified electrician.

1. Matikan Kuasa: Before starting installation, ensure the power to the circuit at the main fuse box or circuit breaker is completely turned off.
2. Sediakan Permukaan Pemasangan: Ensure the wall surface where the fixture will be mounted is clean, dry, and structurally sound.
3. Pasang Plat Pemasangan: Secure the mounting plate to the junction box in the wall using the provided screws. Ensure it is firmly attached.
4. Buat Sambungan Elektrik: Carefully connect the fixture's wires to the corresponding house wires. Connect the black (hot) wire from the fixture to the black (hot) wire from the junction box. Connect the white (neutral) wire from the fixture to the white (neutral) wire from the junction box. Connect the green or bare copper (ground) wire from the fixture to the green or bare copper (ground) wire from the junction box. Use wire nuts to secure all connections.
5. Lekapan Lekapan: Carefully align the fixture with the mounting plate and secure it in place using the provided screws. Ensure the fixture is flush against the wall and stable.
6. Pasang Mentol: Insert two incandescent bulbs (max 60 watts each) into the sockets. Do not overtighten.
7. Pulihkan Kuasa: Setelah pemasangan selesai dan semua sambungan selamat, pulihkan kuasa pada pemutus litar.

Image 2: The Innovations 208L-BK-M10-BK 2 Vertical Bath Vanity Light installed above a bathroom mirror, demonstrating its typical application.

5. Arahan Operasi

This vanity light fixture is designed for simple operation. Once properly installed and connected to a power source, it can be controlled via a standard wall switch (not included).

• Menghidupkan/Mematikan: Flip the wall switch connected to the fixture to the 'ON' position to illuminate the lights. Flip the switch to the 'OFF' position to turn them off.
• Jenis Mentol: This fixture uses incandescent bulbs. Ensure replacement bulbs match the specified type and wattage (maksimum 60 watt setiap soket).

6. Penyelenggaraan

Regular maintenance will help preserve the appearance and functionality of your vanity light fixture.

• Pembersihan: To clean the fixture, ensure the power is turned off and the fixture has cooled. Wipe with a soft, dry cloth. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish.
• Penggantian mentol: Before replacing bulbs, turn off the power to the fixture at the circuit breaker. Allow bulbs to cool completely. Unscrew the old bulb and screw in a new incandescent bulb of the correct type and wattage (maks 60 watt).
• Pemeriksaan: Periksa pendawaian dan sambungan secara berkala untuk sebarang tanda haus atau kerosakan. Jika terdapat sebarang masalah, rujuk juruelektrik yang berkelayakan.

7. Penyelesaian masalah

If you experience issues with your fixture, refer to the following common problems and solutions:

8. Spesifikasi

9. Waranti dan Sokongan

Innovations Lighting stands behind the quality of its products.

• Waranti: This product comes with a 2-year finish warranty and a lifetime electrical warranty.
• Sokongan Pelanggan: For technical assistance, replacement parts, or warranty claims, please contact Innovations Lighting customer service. Refer to the product packaging or the manufacturer's official webtapak untuk maklumat hubungan terkini.