Milwaukee M18 BOS125-0 Random Orbital Sander 18V Bare Unit

1. Produk Lebihview

The Milwaukee M18 BOS125-0 Random Orbital Sander is an 18V cordless tool designed to deliver performance comparable to corded sanders. It features a 12,000 Max OPM (Orbits Per Minute) output and a variable speed dial, allowing users to adjust the orbit speed from 7,000 to 12,000 OPM to match specific application requirements. Its powerful motor efficiently removes material, optimizing productivity per battery charge. Please note that the battery is sold separately.

Figure 1: Milwaukee M18 BOS125-0 Random Orbital Sander with included accessories.

2. Maklumat Keselamatan

Always read and understand all safety warnings, instructions, illustrations, and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire, and/or serious injury. Keep all warnings and instructions for future reference.

• Pakai peralatan pelindung diri (PPE) yang sesuai, termasuk cermin mata keselamatan, perlindungan pendengaran dan topeng habuk.
• Pastikan bahan kerja berada dalam keadaan selamatamped atau ditahan untuk mengelakkan pergerakan semasa operasi.
• Jangan kendalikan sander dalam suasana mudah meletup, seperti dalam kehadiran cecair mudah terbakar, gas atau habuk.
• Jauhkan tangan dan pakaian longgar daripada bahagian yang bergerak.
• Sentiasa keluarkan pek bateri sebelum membuat sebarang pelarasan, menukar aksesori atau menyimpan alat.

3. Kandungan Pakej

The Milwaukee M18 BOS125-0 Random Orbital Sander 18V Bare Unit typically includes:

• M18 BOS125-0 Random Orbital Sander (Bare Unit)
• Dust Collection Box with Filter
• Penyesuai Hos Vakum
• Assorted Sandpaper Discs (e.g., 80-grit)

Nota: Bateri dan pengecas dijual secara berasingan.

4. Persediaan

4.1 Pemasangan Bateri

1. Pastikan sander dimatikan.
2. Align the battery pack with the battery port on the rear of the sander.
3. Luncurkan pek bateri ke dalam port sehingga ia mengklik dengan selamat ke tempatnya.
4. Untuk mengeluarkan, tekan butang pelepas bateri dan luncurkan pek bateri keluar.

4.2 Sandpaper Attachment

The sander uses 5-inch diameter sandpaper discs with a hook-and-loop backing.

1. Pastikan mesin sander dimatikan dan bateri ditanggalkan.
2. Align the holes on the sandpaper disc with the holes on the sanding pad.
3. Press the sandpaper firmly onto the sanding pad to secure it.
4. To remove, simply peel the sandpaper disc off the pad.

4.3 Persediaan Pengumpulan Habuk

The sander offers two options for dust collection: the included dust collection box or a vacuum hose adapter.

1. Using the Dust Collection Box: Slide the dust collection box onto the dust port at the rear of the sander until it clicks into place. Ensure the filter inside the box is clean and properly seated.
2. Using the Vacuum Hose Adapter: If connecting to an external vacuum system, attach the provided vacuum hose adapter to the dust port. Then, connect your shop vacuum hose to the adapter.

Rajah 2: Sisi view of the sander with the dust collection box attached.

5. Arahan Operasi

5.1 Hidupkan/Mati Kuasa

The sander features a simple push-button power switch.

• To turn ON: Press the power button.
• To turn OFF: Press the power button again.

5.2 Kawalan Kelajuan

The variable speed dial allows for precise control over the sanding process.

• Rotate the dial to select a speed setting from 1 (lowest OPM) to 6 (highest OPM).
• Kelajuan yang lebih rendah sesuai untuk kemasan halus atau bahan yang halus.
• Higher speeds are ideal for aggressive material removal.

5.3 Teknik Mengempelas

• Pegang sander dengan kuat dengan kedua-dua tangan.
• Letakkan sander rata pada bahan kerja sebelum menghidupkannya.
• Move the sander in smooth, overlapping circular motions across the surface.
• Avoid applying excessive pressure; let the tool do the work.
• Angkat sander dari benda kerja sebelum mematikannya.

6. Penyelenggaraan

6.1 Dust Collection Box Cleaning

Regularly empty and clean the dust collection box to maintain optimal performance and dust extraction efficiency.

1. Keluarkan kotak pengumpulan habuk dari sander.
2. Open the lid and empty the collected dust.
3. Tap the filter gently to dislodge any embedded dust. For thorough cleaning, the filter can be rinsed with water and allowed to dry completely before reassembly.
4. Reassemble the filter and close the lid securely before reattaching to the sander.

6.2 Pembersihan Am

• Keep the tool's ventilation openings clear and free of debris.
• Gunakan yang lembut, damp kain untuk membersihkan bahagian luar alat. Jangan gunakan bahan kimia yang keras atau pembersih yang kasar.

7. Penyelesaian masalah

• Sander not turning on: Ensure the battery is fully charged and properly inserted. Check the power switch for any obstructions.
• Prestasi pengamplasan yang lemah: Replace worn sandpaper. Ensure the correct grit is being used for the application. Check if the dust collection system is clogged.
• Getaran berlebihan: Ensure the sandpaper is properly centered and securely attached. Check for any damage to the sanding pad.

8. Spesifikasi

9. Waranti dan Sokongan

Milwaukee Power Tools offers a manufacturer's warranty for their products. For specific warranty details, registration, and support, please refer to the documentation included with your purchase or visit the official Milwaukee webtapak. Simpan bukti pembelian anda untuk tuntutan waranti.