pengenalan
This manual provides detailed instructions for the installation, operation, and maintenance of your Amazon Basics AB-DH504-SN Satin Nickel Wave Closet Door Lever. Please read all instructions carefully before beginning installation to ensure proper function and safety.
Image: The Amazon Basics AB-DH504-SN Satin Nickel Wave Closet Door Lever, showcasing its elegant design and satin nickel finish.
Maklumat Keselamatan
AMARAN: Produk ini boleh mendedahkan anda kepada bahan kimia termasuk plumbum, yang diketahui oleh Negeri California boleh menyebabkan kanser dan kecacatan kelahiran atau bahaya pembiakan lain. Untuk maklumat lanjut pergi ke www.P65Warnings.ca.gov.
Always wear appropriate safety gear, such as gloves and eye protection, during installation. Keep small parts away from children.
Kandungan Pakej
Sahkan bahawa semua komponen hadir sebelum memulakan pemasangan:
- Perhimpunan Tuas Luaran
- Perhimpunan Tuas Dalaman
- Adjustable Latch (2-3/8" - 2-3/4" backset)
- Rounded Steel Faceplate
- Pukulan Pukulan
- Skru Pemasangan
- Manual Arahan
Image: All included components of the door lever set, including the lever assemblies, latch, faceplate, and strike plate.
Persediaan dan Pemasangan
This door lever is designed to fit all doors 1-3/8" to 1-3/4" in thickness. The latch is adjustable for backsets of 2-3/8" or 2-3/4". Detailed installation instructions are included with your product. The following provides a general overview daripada proses pemasangan:
- Sediakan Pintu: Ensure your door has the standard bore holes for a door lever. If replacing an existing lever, remove the old hardware.
- Adjust the Latch: If necessary, adjust the latch backset to either 2-3/8" (60mm) or 2-3/4" (70mm) to match your door's specifications. Insert the latch into the door edge, ensuring the bevel faces the door frame. Secure with screws.
- Pasang Tuas Luaran: Place the exterior lever assembly through the door bore hole, ensuring the spindle passes through the latch mechanism.
- Pasang Tuas Dalaman: Align the interior lever assembly with the exterior assembly and secure it with the provided mounting screws. Ensure the levers are horizontal and operate smoothly.
- Pasang Strike Plate: Pasangkan plat penekan pada bingkai pintu, sejajarkannya dengan bolt selak. Kencangkan dengan skru.
- Operasi Ujian: Close the door and test the lever operation from both sides to ensure the latch retracts and extends properly.
Image: The Amazon Basics door lever installed on a white interior door, demonstrating its appearance in a typical setting.
Arahan Operasi
To open the door, simply push down on the lever handle. The latch bolt will retract, allowing the door to open. Release the lever to allow the latch bolt to extend and secure the door when closed.
Penyelenggaraan
To maintain the finish and functionality of your door lever, follow these guidelines:
- Pembersihan: Bersihkan tuil dengan pembersih lembut,amp kain. Elakkan daripada menggunakan pembersih yang melelas, pelarut atau bahan kimia yang keras, kerana ini boleh merosakkan kemasan.
- Pelinciran: If the lever mechanism becomes stiff over time, apply a small amount of silicone-based lubricant to the moving parts of the latch and spindle.
- Mengetatkan: Periodically check and tighten any loose mounting screws to ensure the lever remains securely attached to the door.
Menyelesaikan masalah
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Tuas longgar atau goyah. | Skru pemasangan longgar. | Tighten the mounting screws on the interior side of the lever. |
| Bolt selak tidak ditarik balik sepenuhnya. | Mechanism is dirty or dry; improper installation. | Clean and lubricate the latch mechanism. Recheck installation steps to ensure proper alignment. |
| Pintu tidak berkunci dengan betul. | Strike plate misalignment; latch bolt not extending fully. | Adjust the strike plate on the door frame. Ensure the latch mechanism is clean and lubricated. |
Spesifikasi
| Ciri | Perincian |
|---|---|
| Nombor Model | AB-DH504-SN |
| bahan | Zinc Alloy (body), Steel (internal structure) |
| Selesai | Satin Nickel |
| Keserasian Ketebalan Pintu | 1-3/8" to 1-3/4" |
| Set Belakang Selak Boleh Laras | 2-3/8" (60mm) atau 2-3/4" (70mm) |
| Dimensi Produk | 6.65" L x 4.29" W |
| Berat Barang | 1.43 paun |
| Gaya | Passage (non-locking) |
| UPC | 841511121248 |
Image: A hand holding the door lever, illustrating its approximate size and dimensions (2.6 inches / 6 cm in height).
Waranti dan Sokongan
For warranty information or technical support, please refer to the Amazon Basics official website or contact Amazon customer service. Keep your purchase receipt for warranty claims.
