FEIT Electric BPMR16/GU10/930CA MR16 LED Bulb User Manual

1. Pengenalan

Thank you for choosing the FEIT Electric BPMR16/GU10/930CA MR16 LED Bulb. This manual provides essential information for the safe installation, operation, and maintenance of your new LED bulb. Please read these instructions carefully before use and retain them for future reference.

This MR16 LED bulb is designed for various lighting applications, offering energy efficiency and a long lifespan. It features instant full brightness and is suitable for damp lokasi.

Image: The FEIT Electric BPMR16/GU10/930CA MR16 LED Bulb, showcasing its compact design and GU10 base.

2. Maklumat Keselamatan

Always follow basic safety precautions when installing or replacing light bulbs to reduce the risk of fire, electric shock, or personal injury.

• AMARAN: Risiko renjatan elektrik. Jangan buka. Tidak mengandungi bahagian yang boleh diservis pengguna.
• Matikan kuasa sebelum pemeriksaan, pemasangan atau pengalihan keluar.
• Jangan gunakan tempat yang terdedah secara langsung kepada air. Sesuai untuk damp lokasi.
• Peranti ini tidak dimaksudkan untuk digunakan dengan pintu keluar kecemasan atau lampu kecemasan.
• Do not use with standard dimmers unless specifically stated as dimmable. This bulb is dimmable. Ensure your dimmer is compatible with LED technology.
• Jangan pasang mentol dengan tangan yang basah atau apabila berdiri di atas basah atau damp permukaan.
• Ensure the bulb is securely fastened in the fixture.

3. Persediaan dan Pemasangan

This LED bulb is designed for easy installation into compatible GU10 base fixtures.

1. Matikan Kuasa: Before attempting any installation, ensure the power to the light fixture is completely turned off at the circuit breaker or fuse box.
2. Keluarkan Mentol Lama: Allow the old bulb to cool completely before carefully removing it from the fixture. For GU10 bulbs, typically push up and twist counter-clockwise to unlock and remove.
3. Pasang Mentol Baharu: Align the two pins of the FEIT Electric BPMR16/GU10/930CA LED bulb with the holes in the GU10 socket. Push the bulb firmly into the socket and twist clockwise until it locks into place.
4. Pulihkan Kuasa: Setelah mentol dipasang dengan selamat, kembalikan kuasa ke lekapan pada pemutus litar.
5. Ujian: Hidupkan suis lampu untuk mengesahkan mentol berfungsi dengan betul.

If the bulb does not light up, ensure it is properly seated in the socket and that power is restored to the fixture.

4. Arahan Operasi

The FEIT Electric BPMR16/GU10/930CA LED Bulb operates like a standard light bulb once installed.

• Menghidupkan/Mematikan: Use the existing light switch connected to your fixture to turn the bulb on or off. The bulb will instantly turn on to full brightness.
• Peredupan: This bulb is dimmable. If your fixture is connected to a compatible LED dimmer switch, you can adjust the light output. Ensure your dimmer is specifically designed for LED bulbs to avoid flickering or performance issues.
• Persekitaran Penggunaan: This bulb is suitable for both indoor and outdoor use, including damp locations. Avoid direct exposure to water.

5. Penyelenggaraan

The FEIT Electric BPMR16/GU10/930CA LED Bulb requires minimal maintenance.

• Pembersihan: Before cleaning, ensure the power to the fixture is turned off and the bulb has cooled. Wipe the bulb with a soft, dry cloth. Do not use liquid or abrasive cleaners.
• Penggantian: With an average life of 25,000 hours, this LED bulb is designed for long-term use. When replacement is eventually needed, follow the installation steps in Section 3.

6. Penyelesaian masalah

If you encounter issues with your FEIT Electric LED bulb, refer to the following troubleshooting steps:

• Mentol Tidak Menyala:
  • Pastikan suis kuasa dihidupkan.
  • Periksa pemutus litar atau fius.
  • Verify the bulb is securely seated in the GU10 socket. Turn off power, remove, and re-insert the bulb.
  • Uji mentol dalam lekapan kerja lain untuk menolak isu lekapan.
• Isu Kelipan atau Peredupan:
  • Ensure your dimmer switch is compatible with LED bulbs. Older incandescent-only dimmers may cause flickering.
  • Check for loose connections in the fixture or switch.
• Bulb Emits Buzzing Noise:
  • This can sometimes occur with incompatible dimmer switches. Try using the bulb without a dimmer or with a different LED-compatible dimmer.

Jika masalah berterusan selepas mengikuti langkah ini, hubungi sokongan pelanggan.

7. Spesifikasi

Detailed technical specifications for the FEIT Electric BPMR16/GU10/930CA MR16 LED Bulb:

8. Waranti dan Sokongan

Waranti: The manufacturer states "No warranty." for this product. Please refer to your retailer's return policy for any initial defects.

Sokongan Pelanggan: For further assistance or inquiries, please contact Feit Electric customer service through their official webtapak atau peruncit tempat produk itu dibeli.