ECG OR 2090

ECG OR 2090 Oil Radiator Instruction Manual

Model: OR 2090 | Brand: ECG

1. Maklumat Keselamatan Penting

Please read this instruction manual carefully before using the appliance and keep it for future reference. Failure to follow these instructions may result in electric shock, fire, or serious injury.

2. Produk Lebihview

The ECG OR 2090 is a 9-fin oil radiator designed for efficient and quiet heating of living spaces. Its robust construction ensures high heat retention, providing warmth even after the power is turned off.

ECG OR 2090 Oil Radiator, front view.

Rajah 2.1: Depan view of the ECG OR 2090 Oil Radiator, showcasing its 9-fin design and overall structure.

Ciri-ciri Utama:

3. Persediaan

The ECG OR 2090 oil radiator comes pre-assembled with wheels for easy setup. Follow these steps to prepare your radiator for use:

  1. Membongkar: Tanggalkan radiator daripada pembungkusannya dengan berhati-hati. Simpan pembungkusan untuk penyimpanan atau pengangkutan pada masa hadapan.
  2. Kedudukan: Place the radiator on a stable, level surface. Ensure there is adequate clearance (at least 50 cm) from walls, furniture, curtains, and other flammable materials to allow for proper air circulation and prevent fire hazards.
  3. Pengurusan Kabel: Unwind the power cord completely from the cable storage area. Ensure the cord is not tangled or obstructed.
  4. Detail of the convenient cable storage on the ECG OR 2090 Oil Radiator.

    Figure 3.1: The integrated cable storage hook helps keep the power cord tidy when not in use or for transport.

  5. Sambungan Kuasa: Plug the power cord into a suitable 220-240 V ~ 50/60 Hz grounded electrical outlet. Do not use extension cords or power strips unless absolutely necessary and ensure they are rated for the radiator's power consumption (2000 W).
sebelah view of the ECG OR 2090 Oil Radiator, showing the fins and wheels.

Rajah 3.2: Sisi view illustrating the radiator's fins and the sturdy wheels for easy movement.

4. Arahan Operasi

The ECG OR 2090 oil radiator is equipped with a thermostat and power level selector for optimal heating control.

Close-up of the ECG OR 2090 Oil Radiator control panel with thermostat and power settings.

Figure 4.1: Close-up of the control panel, showing the thermostat dial (Min-Max) and power selector (0-I-II-III).

  1. Hidupkan kuasa: Ensure the radiator is plugged into a suitable power outlet.
  2. Set Power Level: Use the lower dial (Power selector) to choose your desired heating output:
    • 0: Mati
    • I: Low Power (750 W)
    • II: Medium Power (1500 W)
    • III: High Power (2000 W)
    The power indicator light (red) will illuminate when the radiator is receiving power and operating.
  3. Tetapkan Termostat: Use the upper dial (Thermostat) to adjust the desired room temperature.
    • Turn the dial towards "Min" for lower temperatures.
    • Turn the dial towards "Max" for higher temperatures.
    The radiator will cycle on and off to maintain the set temperature.
  4. Moving the Radiator: To move the radiator, ensure it is unplugged and has cooled down. Use the integrated handle and wheels for easy transport.
  5. Atas view of the ECG OR 2090 Oil Radiator showing the integrated handle for portability.

    Figure 4.2: The ergonomic handle allows for easy lifting and repositioning of the radiator.

  6. Matikan: To turn off the radiator, set the Power selector dial to "0" and unplug the appliance from the wall outlet.

5. Penyelenggaraan

The ECG OR 2090 oil radiator is designed for maintenance-free operation. No oil changes are required.

6. Penyelesaian masalah

If you experience issues with your ECG OR 2090 oil radiator, please consult the following table before contacting customer support.

MasalahKemungkinan PuncaPenyelesaian
Radiator tidak menyala.
  • Tidak dipalamkan.
  • Salur keluar kuasa tidak berfungsi.
  • Power selector is set to "0".
  • Termostat ditetapkan terlalu rendah.
  • Thermal safety activated.
  • Pastikan palam dimasukkan sepenuhnya ke dalam alur keluar.
  • Uji alur keluar dengan alat lain.
  • Set the power selector to I, II, or III.
  • Tingkatkan tetapan termostat.
  • Unplug the radiator, let it cool for 30 minutes, then plug it back in. Ensure proper ventilation.
Radiator tidak dipanaskan dengan secukupnya.
  • Tahap kuasa ditetapkan terlalu rendah.
  • Termostat ditetapkan terlalu rendah.
  • Room size too large for the radiator's output.
  • Increase the power level (to II or III).
  • Tingkatkan tetapan termostat.
  • Consider using additional heating or a higher wattage heater for larger spaces.
Bunyi luar biasa semasa operasi.
  • Pengembangan/pengecutan logam yang normal.
  • Radiator tidak berada di atas permukaan yang rata.
  • This is usually normal and will subside.
  • Ensure the radiator is on a flat, stable surface.

7. Spesifikasi

AtributNilai
JenamaECG
Nombor ModelATAU 2090
warnaKelabu
Dimensi Produk (L x W x H)24 x 50.4 x 63.6 cm
bahanlogam
Ciri Khasroda
Berat Barang10 Kilogram
Keluaran Haba2000 Watt
Sumber KuasaElektrik Bertali
Kaedah PemanasanKonvensyen
Jenis PemasanganLantai Lantai
Dinilai Voltage220-240 V ~ 50/60 Hz

8. Waranti dan Sokongan

ECG products are manufactured to high-quality standards. For information regarding warranty terms and conditions, please refer to the warranty card included with your purchase or visit the official ECG webtapak. Simpan bukti pembelian anda untuk sebarang tuntutan waranti.

For technical support, spare parts, or service inquiries, please contact your local distributor or the ECG customer service department. Contact information can typically be found on the product packaging or the brand's official webtapak.

Note: Information on spare parts availability for this specific model is currently unavailable.