1. Pengenalan
This manual provides instructions for the installation, operation, and maintenance of the Moxa EDS-208 8-Port Unmanaged Ethernet Switch. The EDS-208 is designed for industrial networking applications, offering reliable 10/100BaseT(X) Ethernet connectivity in a compact, unmanaged form factor.
2. Maklumat Keselamatan
- Baca semua arahan dengan teliti sebelum mengendalikan peranti.
- Pastikan bekalan kuasa voltage is within the specified range for the device. A power supply is not included and must be purchased separately.
- Jangan dedahkan peranti kepada kelembapan atau suhu yang melampau.
- Hanya kakitangan yang berkelayakan harus melakukan pemasangan dan penyelenggaraan.
- Putuskan sambungan kuasa sebelum membersihkan atau menservis peranti.
3. Kandungan Pakej
Before installation, verify that the package contains the following items:
- Moxa EDS-208 Unmanaged Ethernet Switch
- Panduan Pemasangan Pantas (jika disertakan)
- Kad Waranti (jika disertakan)
Jika mana-mana barang ini hilang atau rosak, sila hubungi wakil jualan anda untuk mendapatkan bantuan.
4. Produk Lebihview
Rajah 1: Moxa EDS-208 Unmanaged Ethernet Switch. This image displays the Moxa EDS-208 unmanaged Ethernet switch. The front panel features eight 10/100BaseT(X) RJ45 ports, numbered 1 through 8. Above the ports, the Moxa logo is visible, along with a 'P' indicator and a power LED. At the top, a green removable terminal block is present for power input. The device has a dark grey plastic housing with ribbed sides for heat dissipation.
4.1. Susun atur Panel Hadapan
- Power Input Terminal Block: Located at the top, a green removable terminal block for connecting the DC power supply.
- Power LED (P): Menunjukkan status kuasa peranti.
- 10/100BaseT(X) Ports (1-8): Eight RJ45 ports for connecting Ethernet devices. Each port supports 10 Mbps or 100 Mbps operation.
- LED Pautan/Aktiviti: Integrated into each RJ45 port, these LEDs indicate network link status and data activity.
5. Persediaan
5.1. Memasang Suis
The EDS-208 supports DIN-rail mounting. To mount the switch:
- Attach the DIN-rail mounting kit (if not pre-installed) to the rear of the switch.
- Hook the top of the DIN-rail clip over the top edge of the DIN rail.
- Tekan suis dengan kuat pada rel DIN sehingga klip terkunci pada tempatnya.
5.2. Kuasa Penyambung
Important: A power supply is NOT included with the EDS-208 and must be purchased separately. Ensure the power supply meets the device's voltage dan keperluan semasa.
- Pastikan punca kuasa dimatikan.
- Connect the positive and negative wires from your DC power supply to the corresponding terminals on the green removable terminal block at the top of the switch. Refer to the terminal block markings for correct polarity.
- Insert the terminal block firmly into its receptacle on the switch.
- Turn on the power source. The 'P' LED on the front panel should illuminate, indicating power is supplied.
5.3. Connecting Network Devices
Connect standard Ethernet cables (Cat5e or better) from your network devices (e.g., computers, servers, other switches) to any of the eight RJ45 ports on the front panel of the EDS-208. The switch automatically detects the speed (10 Mbps or 100 Mbps) and duplex mode of the connected devices.
6. Mengendalikan Suis
6.1. Petunjuk LED
The EDS-208 features several LED indicators to provide status information:
- Power LED (P):
- pada: Suis menerima kuasa.
- Mati: Suis tidak menerima kuasa.
- Link/Activity LEDs (per RJ45 port):
- pada: Pautan rangkaian yang sah telah diwujudkan.
- Berkelip: Data sedang dihantar atau diterima melalui port.
- Mati: Tiada pautan rangkaian diwujudkan.
6.2. Kefungsian Asas
The EDS-208 is an unmanaged switch, meaning it operates automatically without requiring any configuration. It provides basic Ethernet switching functions, including:
- Store-and-Forward Switching: Ensures data integrity by checking for errors before forwarding frames.
- Auto-Rundingan: Automatically determines the best speed and duplex mode for each connected device.
- Auto MDI/MDI-X: Automatically detects and adjusts for straight-through or crossover Ethernet cables.
- Broadcast Storm Protection: Helps prevent network congestion caused by excessive broadcast traffic.
7. Penyelenggaraan
7.1. Pembersihan
To clean the switch:
- Disconnect power to the device.
- Gunakan kain lembut dan kering untuk mengelap bahagian luar suis.
- Jangan gunakan pembersih cecair atau aerosol, kerana ia boleh merosakkan peranti.
7.2. Pertimbangan Alam Sekitar
Ensure the switch operates within its specified temperature and humidity ranges. Avoid placing the switch in areas with excessive dust, vibration, or direct sunlight. Proper ventilation is crucial for optimal performance and longevity.
8. Penyelesaian masalah
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| No power (Power LED off) |
|
|
| No link (Link LED off) |
|
|
| Prestasi rangkaian perlahan |
|
|
9. Spesifikasi
| Ciri | Spesifikasi |
|---|---|
| Model | EDS-208 |
| Pelabuhan Ethernet | 8 x 10/100BaseT(X) RJ45 ports |
| Piawaian | IEEE 802.3, 802.3u, 802.3x |
| Kadar Pemindahan Data | 100 Megabits Per Second (Max) |
| Input Kuasa | Not specified (Power Supply not Included) |
| Penilaian Semasa | 0.07 Amps |
| Suhu Operasi | -10 hingga 60°C (14 hingga 140°F) |
| Suhu Penyimpanan | Tidak dinyatakan |
| Kelembapan | Tidak dinyatakan |
| Bahan Perumahan | plastik |
| Dimensi (L x W x H) | 3.94 x 1.57 x 3.41 inci (100 x 40 x 86.6 mm) |
| Berat Barang | 1 paun (0.45 kg) |
| Melekap | DIN-rel |
10. Waranti & Sokongan
10.1. Maklumat Waranti
Moxa products are covered by a limited warranty. For detailed warranty terms and conditions, please refer to the warranty card included with your product or visit the official Moxa webtapak. Simpan bukti pembelian anda untuk tuntutan waranti.
10.2. Sokongan Teknikal
If you encounter any issues that cannot be resolved using this manual, please contact Moxa technical support. You can find contact information on the official Moxa webtapak (www.moxa.com) atau melalui pengedar tempatan anda.
