Manual Pengguna Lampu PAR Audibax Orlando 162 Plus

1. Pengenalan

The Audibax Orlando 162 Plus is a professional PAR light designed for various lighting applications. It features 54 x 3W RGB 3-in-1 LEDs, offering a wide range of color mixing capabilities. This device supports DMX control, automatic programs, sound-activated modes, and master/slave operation, making it suitable for stage lighting, events, and architectural illumination. This manual provides essential information for safe operation, setup, and maintenance.

2. Maklumat Keselamatan

• Keselamatan Elektrik: Always connect the device to a grounded power outlet. Ensure the voltage matches the device's requirements (AC90-240V, 50/60Hz). Disconnect power before cleaning or servicing.
• penempatan: Install the fixture in a well-ventilated area, away from heat sources and flammable materials. Ensure stable mounting to prevent accidental falls.
• Pengendalian: Avoid direct eye exposure to the light source. Do not operate the device if the power cord is damaged. Do not attempt to repair the device yourself; refer servicing to qualified personnel.
• Persekitaran: This device is intended for indoor use only. Protect it from moisture and extreme temperatures.

3. Kandungan Pakej

Sahkan bahawa semua item ada semasa membongkar:

• Audibax Orlando 162 Plus PAR Light
• Pendakap Pemasangan
• Kabel Kuasa
• Manual Pengguna

4. Produk Lebihview

The Audibax Orlando 162 Plus features a robust aluminum housing and an adjustable mounting bracket for versatile positioning.

Rajah 4.1: Depan view of the Audibax Orlando 162 Plus PAR light, showcasing the 54 RGB LEDs illuminated in green.

Rajah 4.2: Sisi view of the PAR light, illustrating the adjustable mounting bracket for flexible installation.

Panel Kawalan dan Sambungan

The rear panel provides access to the control interface and input/output connections.

Rajah 4.3: Belakang view of the PAR light, detailing the DMX IN/OUT ports, power input, digital display, and control buttons (MENU, UP, DOWN, ENTER).

• Paparan Digital: Menunjukkan mod semasa dan tetapan parameter.
• Butang MENU: Navigates through the main menu options.
• Butang ATAS/BAWAH: Adjust parameter values or navigate menu items.
• Butang ENTER: Mengesahkan pilihan.
• DMX MASUK/KELUAR: Penyambung XLR 3-pin untuk sambungan isyarat DMX.
• KUASA DALAM: IEC power input for connecting the power cable.

5. Persediaan

5.1 Pemasangan

1. Pasangkan pendakap pelekap dengan kukuh pada lekapan menggunakan skru yang disediakan.
2. Mount the fixture to a truss, ceiling, or stand using appropriate clamps and safety cables (not included). Ensure the mounting surface can support the weight of the fixture.
3. Adjust the angle of the fixture using the bracket's locking knobs.

5.2 Sambungan Kuasa

1. Connect the supplied power cable to the POWER IN socket on the rear of the fixture.
2. Plug the other end of the power cable into a suitable grounded power outlet.

5.3 Sambungan DMX (Pilihan)

For DMX control, connect a DMX controller to the DMX IN port of the first fixture. Use DMX OUT to connect to the DMX IN of the next fixture in a daisy chain configuration.

• Use standard 3-pin XLR DMX cables.
• Ensure the DMX chain is terminated with a 120-ohm resistor at the last fixture for optimal signal integrity.

6. Arahan Operasi

Use the MENU, UP, DOWN, and ENTER buttons on the rear panel to navigate and select operating modes and parameters.

6.1 Menu Navigasi

• Tekan MENU to cycle through the main menu options (e.g., DMX Address, Auto Mode, Sound Mode, Master/Slave).
• guna UP dan TURUN to adjust values or select sub-options within a menu.
• Tekan MASUK to confirm your selection or save changes.

6.2 Mod Pengendalian

The Orlando 162 Plus offers several operational modes:

• Mod DMX: Allows external control via a DMX controller. Set the DMX address using the menu. Refer to the DMX channel chart (not provided in this manual, typically found in a separate DMX protocol sheet) for specific control functions.
• Mod Auto: The fixture runs through pre-programmed light shows automatically. Various auto programs may be available; use UP/DOWN to select.
• Mod Diaktifkan Bunyi: The light patterns and changes respond to ambient sound detected by the built-in microphone. Adjust sensitivity if available.
• Mod Tuan/Hamba: Connect multiple Orlando 162 Plus fixtures. Set one unit as 'Master' and others as 'Slave'. The slave units will synchronize their operation with the master unit.
• Mod Warna Statik: Select a fixed color. The 3-in-1 RGB LEDs allow for a wide spectrum of colors.
• Fungsi Strob: Activates a flashing light effect. This can often be adjusted for speed.

6.3 Color Examples

7. Penyelenggaraan

• Pembersihan: Regularly clean the lens and housing with a soft, lint-free cloth. Do not use abrasive cleaners or solvents. Ensure the device is powered off and unplugged before cleaning.
• Pemeriksaan: Periodically check power cables, DMX cables, and mounting hardware for any signs of wear or damage. Replace damaged components immediately.
• Storan: When not in use, store the fixture in a dry, dust-free environment.

8. Penyelesaian masalah

9. Spesifikasi

10. Waranti dan Sokongan

Audibax products are manufactured to high-quality standards. For warranty information, please refer to the terms and conditions provided at the point of purchase or contact Audibax customer support. For technical assistance or service inquiries, please visit the official Audibax webtapak atau hubungi peniaga tempatan anda.