Littelfuse FLNR045

Manual Arahan

Littelfuse FLNR045 FUS 250V T/D Class RK5 45A

1. Pengenalan

This manual provides essential information for the safe and effective use of the Littelfuse FLNR045 FUS 250V T/D Class RK5 45A fuse. Please read this manual thoroughly before installation or operation and retain it for future reference. This fuse is designed for use in panel accessories and electrical systems requiring reliable overcurrent protection.

2. Maklumat Keselamatan

AMARAN: Electrical shock hazard. Improper installation or use of this product can result in serious injury or death. Always follow local electrical codes and safety regulations.

3. Penerangan dan Ciri Produk

The Littelfuse FLNR045 is a 45 Amp, 250 Volt, Class RK5, dual-element, time-delay fuse. It is designed to provide superior protection for motors and other inductive loads against both overloads and short-circuits. Its time-delay characteristic allows for temporary inrush currents without nuisance opening, while still providing fast-acting protection under short-circuit conditions.

Littelfuse FLNR045 Class RK5 Time-Delay Fuse

Figure 3.1: A Littelfuse FLNR045 Class RK5 time-delay fuse. This image shows the cylindrical body of the fuse with the Littelfuse brand and "CLASS RK5 Time Delay Dual Element" visible on its label.

Ciri-ciri Utama:

4. Persediaan dan Pemasangan

Installation of the FLNR045 fuse should only be performed by a qualified electrician in accordance with all applicable national and local electrical codes.

  1. Litar Nyahtenaga: Before beginning any work, ensure that the circuit where the fuse is to be installed or replaced is completely de-energized. Verify with a voltage penguji.
  2. Kenal pasti Pemegang Fius: Locate the appropriate fuse holder or disconnect switch for the circuit requiring protection.
  3. Masukkan Fius: Carefully insert the FLNR045 fuse into the fuse clips or holder, ensuring a secure and proper connection. Do not force the fuse.
  4. Sahkan Pemasangan: Double-check that the fuse is seated correctly and that all connections are tight.
  5. Litar Semula Tenaga: Setelah pemasangan selesai dan disahkan, pulihkan kuasa ke litar.

It is critical to match the fuse's voltage dan amperage ratings to the circuit's requirements. Using a fuse with an incorrect rating can lead to system failure or hazardous conditions.

5. Prinsip Operasi

The Littelfuse FLNR045 is a current-limiting, time-delay fuse. This means it is designed to:

The time-delay feature is particularly beneficial in circuits with inductive loads that draw high inrush currents upon startup, preventing unnecessary fuse blows and ensuring continuous operation.

6. Penyelenggaraan

Fuses are generally maintenance-free components. However, periodic inspection of the fuse and its holder is recommended as part of routine electrical system maintenance.

7. Penyelesaian masalah

If a circuit protected by the FLNR045 fuse loses power, the fuse may have blown due to an overcurrent condition. Follow these steps:

  1. Litar Nyahtenaga: Immediately disconnect power to the affected circuit at the main panel.
  2. Kenal pasti Fius Tertiup: Carefully remove the fuse (using appropriate tools if necessary) and test it with a multimeter for continuity. A blown fuse will show an open circuit (no continuity).
  3. Siasat Punca: Before replacing the fuse, identify and rectify the cause of the overcurrent. Common causes include:
    • Short-circuit in wiring or equipment.
    • Overloaded circuit (too many devices drawing power).
    • Faulty appliance or motor.
  4. Gantikan Fius: Once the fault is cleared, replace the blown fuse with a new Littelfuse FLNR045 fuse. Ensure the replacement fuse has the exact same ratings.
  5. Re-energize and Monitor: Restore power and monitor the circuit for proper operation. If the new fuse blows immediately, there is still an unresolved issue in the circuit that requires professional attention.

Do not repeatedly replace fuses without addressing the underlying problem, as this can lead to serious electrical hazards.

8. Spesifikasi

SpesifikasiNilai
Nombor ModelFLNR045
JenamaLittefuse
Voltage Peringkat250 Voltan AC
AmpPeringkat yang padat45 Amps
Kelas FiusRK5
CiriTime-Delay, Dual-Element
bahanStone (Insulating Body)
PematuhanUL Tersenarai
kategoriPanel Accessories, Fuse

9. Waranti dan Sokongan

For information regarding warranty, technical support, or service for your Littelfuse FLNR045 fuse, please contact Littelfuse directly through their official weblaman web atau saluran khidmat pelanggan. Simpan resit pembelian anda untuk sebarang tuntutan jaminan.

Littelfuse Official Webtapak: www.littelfuse.com

Dokumen Berkaitan - FLNR045

Praview Littelfuse JLLN Series Class T Fuses | Fast-Acting, High Interrupting Capacity
Explore Littelfuse JLLN Series Class T fuses, offering compact design, fast-acting overload and short-circuit protection, and high interrupting ratings up to 200,000 AIR. Ideal for drives, inverters, and power supplies. View specifications, ordering information, and dimensions.
Praview Littelfuse P6SMB Series 600W Surface Mount TVS Diodes Lembaran Data
Helaian Data untuk Littelfuse P6SMB Series 600W Surface Mount Transient Voltage Diod Penekan (TVS). Termasuk ciri, faedah, ciri elektrik, penilaian, lengkung, parameter pematerian, spesifikasi fizikal dan persekitaran serta maklumat penomboran bahagian.
Praview Panduan Pengubahsuaian Nisbah Pusingan CT: Nota Teknikal Littelfuse
Ketahui cara mengubah suai nisbah lilitan pengubah arus (CT) Littelfuse dengan nota teknikal ini, termasuk kaedah menambah dan menolak lilitan, dan bekas praktikalamples. Memahami prinsip operasi CT dan pelarasan nisbah.
Praview PTS526 Series Microminiature SMT Top Actuated Tactile Switch Datasheet
Datasheet for the Littelfuse PTS526 Series microminiature SMT top-actuated tactile switch. Features a 5.2 x 5.2 mm footprint, variable heights, and multiple actuation forces, suitable for IoT, home automation, and remote control applications. Includes detailed specifications, mechanical characteristics, dimensions, and ordering information.
Praview Ground-Fault Monitoring in Adjustable-Speed Drive Applications | Littelfuse Technical Note
Technical note from Littelfuse on ground-fault monitoring for adjustable-speed drives (VFDs) using SE-700 and EL731 series relays. Covers issues, filtering, recommended settings, and current transformer location for resistance-grounded systems.
Praview Littelfuse 55505 Series Hall Effect Geartooth Speed Sensor Datasheet
Datasheet for the Littelfuse 55505 Series Hall Effect Flange Mount Geartooth Speed Sensor, detailing its features, applications, electrical ratings, and part numbering system for industrial, commercial, and automotive use.