1. Pengenalan
This manual provides detailed instructions for the safe installation, operation, and maintenance of your Forte Lighting Harmon 1-Light Cord-Hung Pendant. Please read this manual thoroughly before beginning installation and retain it for future reference.
The Forte Lighting Harmon pendant is designed for indoor use, featuring a durable steel construction with a black finish and a glass shade. It is dimmable and uses a medium base (E26) bulb (not included).
2. Apa yang ada di dalam Kotak
Sahkan bahawa semua komponen ada dan tidak rosak sebelum meneruskan pemasangan.
- Pendant Fixture (including cord and lamp pemegang)
- Kanopi Pemasangan
- Teduh Kaca
- Kit Perkakasan Pemasangan (skru, nat dawai, dll.)
- Manual Arahan
3. Maklumat Keselamatan Penting
AMARAN: Risiko renjatan elektrik. Putuskan sambungan kuasa pada kotak fius atau pemutus litar sebelum pemasangan atau servis.
- Read all instructions carefully before installing.
- Semua pendawaian mesti mengikut kod elektrik kebangsaan dan tempatan. Jika anda tidak pasti tentang pendawaian, sila rujuk juruelektrik yang berkelayakan.
- Jangan melebihi wat maksimumtage dinyatakan untuk mentol (100 Watt).
- Pastikan lekapan dipasang dengan kukuh pada elemen struktur siling.
- Jangan sambungkan lekapan ini kepada sistem elektrik yang tidak dibumikan.
- Pakai cermin mata dan sarung tangan keselamatan semasa pemasangan.
- Jauhkan bahan mudah terbakar dari lekapan lampu.
4. Persediaan dan Pemasangan
4.1. Sebelum Anda Bermula
- Matikan kuasa pada pemutus litar utama atau kotak fius.
- Kumpulkan peralatan yang diperlukan: pemutar skru, penanggal wayar, pita elektrik, tangga.
- Unpack all components and inspect for damage.
4.2. Memasang Lekapan
- Pasang Pendakap Pelekap: Secure the mounting bracket (usually included with the canopy) to the electrical junction box in the ceiling using the provided screws. Ensure it is firmly attached.
- Laraskan Panjang Kord: Determine the desired hanging height for the pendant. The cord length can be adjusted by pushing the cord through the cord grip in the canopy. Once the desired length is achieved, tighten the cord grip to secure it.
- Sambungan Wayar:
- Sambungkan wayar hitam lekapan ke wayar hitam (panas) rumah menggunakan nat wayar.
- Sambungkan wayar putih lekapan ke wayar putih (neutral) rumah menggunakan nat wayar.
- Connect the fixture's ground wire (bare copper or green) to the house's ground wire and to the mounting bracket's ground screw.
- Ensure all wire nuts are securely tightened and connections are insulated with electrical tape if necessary.
- Kanopi Selamat: Carefully push the wired connections into the junction box. Align the canopy with the mounting bracket and secure it to the ceiling using the canopy screws.
- Pasang Mentol: Screw a medium base (E26) bulb (max 100W) into the fixture's socket.
- Lampirkan Naungan: Carefully attach the glass shade to the fixture according to the design. This typically involves screwing it onto a threaded ring or securing it with retaining clips.
Rajah 4.2.1: Depan view of the Forte Lighting Harmon pendant light. This image shows the overall design, including the black finish, cord, and dome-shaped shade.
Figure 4.2.2: Technical drawing illustrating the dimensions of the Forte Lighting Harmon pendant. Key measurements include a 5-inch canopy diameter, 13.5-inch fixture height, 12-inch shade diameter, and an 8-foot cord.
5. Arahan Operasi
Once installed, restore power at the circuit breaker. The pendant light can be operated using a standard wall switch. If connected to a compatible dimmer switch, the light's brightness can be adjusted. Ensure the bulb used is also dimmable if you intend to use this feature.
6. Penyelenggaraan
6.1. Pembersihan
To clean the fixture, ensure power is off. Wipe with a soft, dry cloth. Do not use abrasive cleaners or solvents as they may damage the finish or glass. For the glass shade, a mild glass cleaner can be used, applied to a cloth, not directly to the fixture.
6.2. Penggantian Mentol
Before replacing the bulb, turn off power to the fixture at the circuit breaker. Allow the bulb to cool completely. Unscrew the old bulb and screw in a new medium base (E26) bulb, ensuring it does not exceed the maximum 100-watt rating.
7. Penyelesaian masalah
If you experience issues with your pendant light, refer to the table below for common problems and solutions.
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Cahaya tidak menyala. | No power to fixture; Loose wiring; Faulty bulb; Faulty switch. | Check circuit breaker/fuse. Ensure all wire connections are secure. Replace bulb. Test switch. |
| Cahaya berkelip-kelip. | Loose bulb; Incorrect bulb type for dimmer; Loose wiring. | Tighten bulb. Ensure dimmable bulb is used with dimmer. Check wiring connections. |
| Pemalapan tidak berfungsi. | Non-dimmable bulb; Incompatible dimmer switch. | Use a dimmable bulb. Ensure dimmer switch is compatible with LED/incandescent bulbs. |
8. Spesifikasi
| Ciri | Perincian |
|---|---|
| Jenama | FORTE |
| Nombor Model | 7110-01-04 |
| warna | Hitam |
| bahan | Alloy Steel (Fixture), Glass (Shade) |
| Gaya | moden |
| Borang Lampu | Loket |
| Jenis Bilik | Bilik Tidur, Ruang Makan, Pejabat Rumah, Dapur, Ruang Tamu |
| Penggunaan Dalaman/Luar | Dalaman |
| Sumber Kuasa | Elektrik Bertali |
| Jenis Pemasangan | Semi Flush Mount (Pendant) |
| Ciri Khas | Boleh dimalapkan |
| Jenis Sumber Cahaya | LED (Compatible) |
| Bilangan Sumber Cahaya | 1 |
| Voltage | 120 Volt |
| Komponen yang Disertakan | Canopy, Shade |
| Wattage (Maksimum) | 100 Watt |
| Pangkalan Mentol | E26 Sederhana |
| Berat Barang | 4 paun |
| Dimensi Produk | 12 x 12 x 14 inches (Fixture) |
| Diameter Kanopi | 5 inci |
| Panjang Kord | 8 feet (adjustable) |
| Pensijilan | UL Tersenarai |
9. Waranti dan Sokongan
9.1. Waranti Pengeluar
This Forte Lighting product is covered by a manufacturer's warranty. Please refer to the warranty card included with your purchase or contact Forte Lighting directly for specific terms and conditions. The warranty typically covers defects in materials and workmanship under normal use.
9.2. Sokongan Pelanggan
For technical assistance, replacement parts, or any questions regarding your Forte Lighting Harmon pendant, please contact Forte Lighting customer support. Contact information can usually be found on the manufacturer's webtapak atau pada pembungkusan produk.
Webtapak: www.fortelighting.com (Nota: Ini ialah pemegang tempat URL, please refer to actual manufacturer website for accurate contact details.)
