OSRAM HMI DIGITAL 1200 W Lamp Manual Arahan

1. Pengenalan

This instruction manual provides essential information for the safe and effective use of your OSRAM HMI DIGITAL 1200 W metal halide lamp. Please read this manual thoroughly before installation and operation, and retain it for future reference. This lamp is designed for professional applications in studio, stage, and television lighting.

2. Maklumat Keselamatan

AMARAN: HMI lamps operate under high internal pressure and produce intense UV radiation and high luminance. Failure to follow safety guidelines can result in serious injury or property damage.

• Always operate this lamp exclusively in enclosed lamp casings specifically designed for HMI lamps.
• Pastikan lamp casing provides adequate UV protection.
• Jangan sentuh lamp with bare hands. Oils from skin can cause hot spots and reduce lamp life. Use clean gloves during handling.
• Benarkan lamp to cool completely before handling or attempting replacement.
• Sekiranya berlaku lamp breakage, mercury may be released. Follow local regulations for cleanup and disposal. Avoid direct contact with broken lamp bahagian.
• Pemasangan dan penyelenggaraan hendaklah hanya dilakukan oleh kakitangan yang berkelayakan.
• Ensure the power supply matches the lamp's nominal voltage dan wattage.

3. Produk Lebihview

Rajah 1: OSRAM HMI DIGITAL 1200 W Lamp. This image displays the OSRAM HMI DIGITAL 1200 W lamp. It features a clear glass envelope revealing the internal arc tube and electrodes, mounted on an orange ceramic G38 base with two metal pins for electrical connection. The base is labeled with 'OSRAM HMI DIGITAL 1200W' and 'MADE IN CZECH REPUBLIC'.

3.1 Ciri-ciri Utama

• High Color Rendering Index (CRI) of >90 for accurate color reproduction.
• UV-Stop (UVS) technology to minimize harmful UV emissions.
• Color temperature of approximately 6,000 K, simulating natural daylight.
• Extremely high luminous efficacy of up to 100 lumens per watt.
• Hot restart capability for quick re-ignition after a brief power interruption.
• Robust stem construction to enhance durability during transport and handling.
• Round moly-foil construction for even heat and current distribution, extending lamp panjang umur.
• Dimmable functionality for flexible light output control.

3.2 Spesifikasi Teknikal

4. Persediaan dan Pemasangan

Penting: Installation must be performed by a qualified technician in accordance with all local electrical codes and safety regulations. Ensure the power is disconnected before beginning installation.

1. Penyediaan: Ensure the fixture is compatible with a G38 base HMI lamp and rated for 1200 W. Verify the fixture is clean and free of debris.
2. Mengendalikan Lamp: Wear clean, lint-free gloves when handling the lamp. Avoid touching the glass envelope directly, as skin oils can cause damage.
3. Penyisipan: Carefully align the G38 base pins with the corresponding sockets in the fixture. Insert the lamp firmly but gently until it is fully seated. Do not force the lamp ke dalam soket.
4. Selamatkan Lekapan: Close and secure the lamp casing according to the fixture manufacturer's instructions. Ensure all safety interlocks are engaged.
5. Sambungan Kuasa: Connect the fixture to the appropriate power supply (100 V, 12 A) via a suitable ballast. Ensure all electrical connections are secure.
6. Semakan Awal: Before full operation, perform a brief test to ensure the lamp ignites correctly and operates without unusual flickering or noise.

5. Arahan Operasi

Sebaik sahaja lamp is correctly installed in a compatible fixture and connected to a suitable ballast, follow these steps for operation:

1. Hidupkan kuasa: Activate the power supply to the ballast. The lamp should ignite within a few seconds.
2. Tempoh Memanaskan Badan: HMI lamps require a short warm-up period (typically 1-5 minutes) to reach full brightness and stable color temperature.
3. Peredupan: If your ballast and fixture support dimming, adjust the light output as required. Refer to your ballast's manual for specific dimming procedures.
4. Hot Restart: l iniamp supports hot restart. If power is briefly interrupted, the lamp can re-ignite without a significant cooling period. However, frequent hot restarts can reduce lamp kehidupan.
5. Matikan: Untuk mematikan lamp, deactivate the power supply to the ballast. Allow the lamp to cool down before any handling.

6. Penyelenggaraan

Regular maintenance ensures optimal performance and extends the lifespan of your OSRAM HMI DIGITAL 1200 W lamp.

• Pembersihan: Bersihkan bahagian luar l secara berkalaamp and the fixture's reflector/lens with a soft, dry, lint-free cloth. Ensure the lamp is cool and power is disconnected before cleaning. Do not use abrasive cleaners.
• Pemeriksaan: Selalu periksa lamp for any signs of damage, such as cracks in the glass envelope or discoloration. Check the base for secure connection and signs of wear.
• Lamp Penggantian: Gantikan lamp when it reaches its rated lifespan (1,000 hours) or if its performance degrades significantly (e.g., reduced brightness, color shift, frequent flickering). Always use genuine OSRAM replacement lamps.
• Pelupusan: Due to mercury content, dispose of spent or broken lamps according to local environmental regulations. Do not dispose of with general household waste.

7. Penyelesaian masalah

If troubleshooting steps do not resolve the issue, contact OSRAM customer support or a qualified service technician.

8. Waranti dan Sokongan

For information regarding the warranty terms and conditions for your OSRAM HMI DIGITAL 1200 W lamp, please refer to the documentation provided at the time of purchase or visit the official OSRAM website. For technical support, replacement parts, or service inquiries, please contact OSRAM customer service through their official channels.

Anda boleh mendapatkan maklumat lanjut dan butiran hubungan di Kedai OSRAM di Amazon.