pengenalan
Thank you for choosing the AREBOS 2-in-1 Mechanic's Creeper and Seat. This versatile tool is designed to provide comfort and mobility for various tasks in your workshop or garage. Please read this manual thoroughly before use to ensure safe and efficient operation.
Arahan Keselamatan
- Always ensure the creeper/seat is on a flat, stable surface before use.
- Do not exceed the maximum load capacity: 150 kg (330 lbs) as a creeper, 120 kg (264 lbs) as a seat.
- Keep hands and fingers clear of moving parts during conversion between creeper and seat modes.
- Inspect the product for any damage or loose parts before each use. Do not use if damaged.
- Ensure all wheels are securely attached and functioning correctly.
- Use the parking brakes on the wheels when stability is required, especially when using as a seat.
- This product is intended for workshop use. Do not use for purposes other than its intended design.
- Jauhkan kanak-kanak dan haiwan peliharaan dari kawasan kerja.
Komponen Lebihview
The AREBOS 2-in-1 Mechanic's Creeper and Seat consists of the following main components:
- Rangka Keluli: Menyediakan integriti struktur dan ketahanan.
- Padded Cushions: For comfort in both creeper and seat configurations.
- Swivel Casters (6x): 360-degree rotating wheels for easy maneuverability.
- Locking Pins/Mechanisms: For securing the creeper in either the flat (creeper) or folded (seat) position.
Image: The AREBOS 2-in-1 Mechanic's Creeper and Seat shown in both its flat creeper mode and folded seat mode, illustrating its dual functionality.
Persediaan dan Perhimpunan
The AREBOS 2-in-1 Creeper and Seat typically comes pre-assembled or requires minimal setup. Follow these steps:
- Membongkar: Keluarkan semua komponen daripada pembungkusan dengan berhati-hati. Periksa sebarang kerosakan penghantaran.
- Wheel Installation (if required): If the wheels are not pre-installed, attach the six swivel casters to the designated points on the frame. Ensure they are securely fastened.
- Pemeriksaan Awal: Before first use, verify that all bolts, nuts, and pins are tight and secure. Ensure the frame is stable and there are no loose parts.
Image: A mechanic positioned under a vehicle, utilizing the AREBOS creeper for comfortable access during repairs.
Arahan Operasi
Converting from Creeper to Seat
- Pastikan tumbuhan menjalar berada di atas permukaan yang rata dan stabil.
- Locate the locking pins or release mechanism on the frame, typically near the hinge points.
- Carefully disengage the locking mechanism.
- Gently lift the headrest section of the creeper upwards. The frame will begin to fold into a seat configuration.
- Continue folding until the seat position is fully engaged and the locking mechanism clicks into place, securing the seat. Verify it is stable before sitting.
Image: The AREBOS creeper transformed into a seat, demonstrating its robust design and capacity to support weight.
Converting from Seat to Creeper
- Pastikan tempat duduk berada di atas permukaan yang rata dan stabil.
- Locate and disengage the locking mechanism that holds the seat in its upright position.
- Carefully lower the backrest section until the creeper is fully flat.
- Ensure the locking pins are engaged to secure the creeper in the flat position.
Imej: A terperinci view of a hand engaging a locking pin on the creeper's steel frame, illustrating the mechanism for securing its position.
Using the Swivel Casters
The six 360-degree swivel casters allow for easy movement in any direction. Some casters may include a parking brake for added stability.
- To move the creeper/seat, simply push it in the desired direction.
- To lock the position, engage the parking brake on the relevant casters by pressing down the lever.
- To unlock, lift the lever.
Imej: A terperinci view of a 360-degree swivel wheel on the AREBOS creeper, showing the parking brake mechanism.
Penyelenggaraan dan Penjagaan
- Pembersihan: Wipe down the padded surfaces and frame with a damp kain. Elakkan bahan kimia keras yang boleh merosakkan bahan.
- Pelinciran: Periodically apply a small amount of lubricant to the swivel caster bearings and hinge points to ensure smooth operation.
- Pemeriksaan Pengikat: Regularly check all bolts, nuts, and locking pins for tightness. Tighten any loose fasteners to maintain structural integrity.
- Storan: Store the creeper/seat in a dry, clean environment when not in use. It can be stored in its compact seat configuration to save space.
Menyelesaikan masalah
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Difficulty converting between modes. | Locking pins are stuck or hinges are stiff. | Apply lubricant to hinge points and locking mechanisms. Ensure no debris is obstructing movement. |
| Creeper/Seat feels unstable. | Loose fasteners or damaged frame/wheels. | Check and tighten all bolts and nuts. Inspect frame and wheels for damage. Do not use if severely damaged. |
| Wheels do not swivel smoothly. | Dirt/debris in bearings or lack of lubrication. | Clean wheels and bearings. Apply lubricant to swivel points. |
| Parking brake not holding. | Brake mechanism worn or misaligned. | Inspect the brake mechanism. If worn, consider replacing the caster. |
Spesifikasi Teknikal
| Ciri | Perincian |
|---|---|
| Model | AR-HE-RM150 |
| Jenama | Arebos |
| taip | 2-in-1 Mechanic's Creeper and Seat |
| Max. Load Capacity (Creeper) | 150 kg (330 lbs) |
| Max. Load Capacity (Seat) | 120 kg (264 lbs) |
| Dimensions (Creeper L x W x H) | 92 x 44 x 12 cm (lebih kurang 36.2 x 17.3 x 4.7 inci) |
| Dimensions (Seat H x W x D) | Approx. 45 cm height (17.7 inches), 44 cm width (17.3 inches), 38 cm depth (15 inches) |
| Berat badan | 5.3 kg (11.7 lbs) |
| roda | 6x 360° Swivel Casters |
| Bahan Bingkai | Keluli Bersalut |
Image: A diagram illustrating the key dimensions of the AREBOS 2-in-1 Creeper and Seat in both its flat and folded states.
Waranti dan Sokongan
For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official AREBOS webtapak. Simpan bukti pembelian anda untuk sebarang tuntutan waranti.
