Produk Selesaiview
The Dyson Quick Release Up Top Adaptor Tool is designed to extend the reach and flexibility of your Dyson V7 or V8 vacuum cleaner. It allows you to clean high, low, and awkward spaces by adjusting the angle of your attached cleaning head.
An image showing the Dyson Quick Release Up Top Adaptor Tool, a silver-colored, articulated accessory designed to connect to Dyson vacuum wands and adjust its angle for reaching high or awkward spaces. It features a red quick-release button and a circular pivot point.
Persediaan
- Pastikan Keserasian: Verify that your Dyson vacuum is a V7 or V8 model. This adaptor is specifically designed for these series.
- Attach to Wand: Locate the quick-release end of your Dyson vacuum wand. Align the adaptor tool with the wand until it clicks securely into place. The red quick-release button on the adaptor should align with the corresponding slot on the wand.
- Pasangkan Kepala Pembersih: Connect your desired Dyson cleaning head (e.g., soft dusting brush, crevice tool) to the other end of the Up Top Adaptor Tool. Ensure it clicks securely.
The tool is now ready for use. Always ensure all connections are secure before operating your vacuum.
Arahan Operasi
The Up Top Adaptor Tool features multiple adjustable angles to facilitate cleaning in hard-to-reach areas.
- Melaraskan Sudut: The tool has a pivot point that allows it to bend. Gently push or pull the two sections of the adaptor to change its angle. It will lock into several predefined positions, typically including a straight (180-degree) position and a 90-degree angled position.
- Cleaning High Surfaces: For cleaning tops of shelves, ceiling fan blades, or light fixtures, adjust the adaptor to an acute angle (e.g., 90 degrees) to position the cleaning head appropriately.
- Cleaning Low or Awkward Spaces: The adaptor can also be used to reach under furniture or around obstacles by adjusting its angle to suit the space.
- Sambungan: When set to the straight (180-degree) position, the adaptor acts as an extension, adding approximately 7-8 inches to your vacuum's reach.
Always ensure the adaptor is securely locked into a position before applying pressure during cleaning to prevent accidental movement.
Penyelenggaraan
To ensure the longevity and optimal performance of your Up Top Adaptor Tool, follow these simple maintenance guidelines:
- Pembersihan: Wipe the exterior of the adaptor with a dry or slightly damp cloth. Do not immerse the tool in water.
- Periksa Sambungan: Periodically check the quick-release mechanisms for any debris or damage that might prevent a secure connection.
- Storan: Store the adaptor in a clean, dry place away from extreme temperatures.
Menyelesaikan masalah
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Alat tidak dipasang dengan selamat. | Debris in connection point; incorrect alignment; incompatible model. | Clean connection points. Ensure proper alignment until a click is heard. Confirm vacuum is a V7 or V8 model. |
| Adaptor does not hold its angle. | Not fully locked into position; excessive force applied. | Ensure the adaptor is pushed or pulled until it clicks into a locked position. Avoid applying excessive leverage. |
Spesifikasi
- Nombor Model: 967752-01
- Keserasian: Dyson V7, Dyson V8 series vacuum cleaners
- Bahan: Komponen plastik dan logam tahan lama
- Sudut boleh laras: Multiple fixed positions, including 90-degree and 180-degree (straight)
- Dimensi anggaran: 11.81 x 11.42 x 2.05 inci (Saiz Pakej)
- Berat anggaran: 14.39 ounces (Package Weight)
Waranti dan Sokongan
For information regarding product warranty, please refer to the documentation provided with your original Dyson vacuum cleaner or visit the official Dyson webtapak.
If you require further assistance or have questions about your Dyson Quick Release Up Top Adaptor Tool, please contact Dyson Customer Support:
- Dyson Official Webtapak: www.dyson.com
- Perkhidmatan Pelanggan: Refer to the contact section on the Dyson website for phone numbers and live chat options specific to your region.
