1. Pengenalan
This manual provides detailed instructions for the setup, operation, and maintenance of your KADAMS Battery Digital Alarm Clock. Please read this manual thoroughly before using the device to ensure proper function and longevity.
Figure 1: KADAMS Battery Digital Alarm Clock (Front View)
This image shows the front of the KADAMS digital alarm clock, featuring a large, clear LCD display. The display shows the time (10:58 AM), date (March 29, Thursday), temperature (64.7°F), and humidity (56%). The clock is white with a minimalist design.
2. Ciri-ciri Utama
- Paparan Masa: 12/24 hour format switchable.
- Suhu Dalaman: Celsius (°C) and Fahrenheit (°F) switchable. Range: -10°C to 50°C (14°F to 122°F). Displays LL/HH outside range.
- Kelembapan Dalaman: Relative Humidity (RH) range 10% - 99%. Displays LL/HH outside range.
- Kalendar: Month, Date (mm/dd), and Day of Week (3 characters).
- Fungsi Penggera: Rings for 2 minutes, with increasing intensity. Automatically stops.
- Fungsi Tunda: 5-minute repeat, no limit on repeats.
- Lampu latar: Activates for 10 seconds when button is pressed.
- Penunjuk Bateri: Displays on LCD when battery power is low (below 2.45V).
- Skrin LCD: Eye-friendly color for better vision and wider viewsudut-sudut.
- Power Cut Memory: Presets are memorized if batteries are re-assembled within 30 seconds.
3. Persediaan
3.1 Pemasangan Bateri
The KADAMS Digital Alarm Clock requires 2 x Bateri Beralkali AA (not included). It is recommended to use new batteries for optimal performance.
- Cari petak bateri di belakang jam.
- Geser buka penutup petak bateri.
- Insert two new AA alkaline batteries, ensuring the correct polarity (+ and -) as indicated inside the compartment.
- Tutup penutup petak bateri dengan selamat.
Penting: Do not mix alkaline and rechargeable batteries. If the clock is not used for an extended period, remove the batteries to prevent leakage.
Rajah 2: Belakang View with Controls and Battery Compartment
This image displays the back of the KADAMS digital alarm clock, highlighting the battery compartment and the control buttons. The buttons are clearly labeled for setting time, alarm, and adjusting values.
4. Arahan Operasi
The clock features several buttons on the back for setting and adjusting functions:
- MASA butang: Digunakan untuk memasuki mod tetapan masa.
- SET butang: Used to confirm settings or cycle through setting options.
- UP (▲) butang: Used to increase values or switch modes.
- TURUN (▼) butang: Used to decrease values or switch modes.
- HIDUP/MATI butang: Used to activate/deactivate the alarm.
- SNOOZE / CAHAYA button (top): Activates backlight and snooze function.
4.1 Menetapkan Masa dan Tarikh
- Tekan dan tahan butang MASA butang selama 3 saat untuk memasuki mod tetapan masa. Digit jam akan berkelip.
- Gunakan UP or TURUN butang untuk melaraskan jam.
- Tekan ke SET button to confirm the hour and move to minute setting. The minute digits will flash.
- Gunakan UP or TURUN butang untuk melaraskan minit.
- Tekan ke SET button to confirm minutes and move to year setting.
- Continue using UP/TURUN dan SET to set the Year, Month, and Date. The day of the week will automatically adjust based on the date.
- After setting the date, press SET untuk keluar dari mod tetapan.
- To switch between 12-hour (AM/PM) and 24-hour format, press the UP butang semasa dalam mod paparan masa biasa.
4.2 Menetapkan Penggera
- Tekan dan tahan butang PENGGERA button (often indicated by a bell icon) for 3 seconds to enter alarm setting mode. The alarm hour digits will flash.
- Gunakan UP or TURUN butang untuk melaraskan jam penggera.
- Tekan ke SET button to confirm the alarm hour and move to alarm minute setting. The alarm minute digits will flash.
- Gunakan UP or TURUN butang untuk melaraskan minit penggera.
- Tekan ke SET butang untuk keluar dari mod tetapan penggera.
- Untuk mengaktifkan atau menyahaktifkan penggera, tekan HIDUP/MATI button. An alarm icon will appear on the display when activated.
4.3 Fungsi Tunda dan Lampu Latar
The large button on the top of the clock serves two functions:
- Lampu latar: Tekan ke SNOOZE / CAHAYA button briefly to illuminate the LCD screen. The backlight will remain active for approximately 10 seconds.
- Tunda: Apabila penggera berbunyi, tekan butang SNOOZE / CAHAYA button to temporarily silence the alarm. The alarm will sound again after 5 minutes. This function can be repeated indefinitely.
Figure 3: Snooze/Light Button Location
This image shows the top of the KADAMS digital alarm clock, with an arrow pointing to the "SNOOZE/LIGHT" button. Text overlays explain its functions: "Press button to Light-Up LCD Screen Deactivates after 10 seconds" and "Press button to Turn Off Alarm Sound 5 Minute Repeat".
4.4 Paparan Suhu dan Kelembapan
The clock continuously displays indoor temperature and relative humidity.
- Unit Suhu: Untuk bertukar antara Celsius (°C) dan Fahrenheit (°F), tekan butang TURUN butang semasa dalam mod paparan masa biasa.
- Julat Paparan: If the temperature or humidity falls outside the measurable range, the display will show "LL" (Low) or "HH" (High).
5. Penyelenggaraan
5.1 Penggantian Bateri
When the battery indicator appears on the LCD screen, it signifies that the battery power is low (below 2.45V). Replace both AA batteries promptly to ensure continued accurate operation. Follow the battery installation steps in Section 3.1.
5.2 Pembersihan
To clean the clock, gently wipe the surface with a soft, dry cloth. Do not use abrasive cleaners, solvents, or immerse the clock in water.
6. Penyelesaian masalah
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Paparan malap atau kosong. | Low batteries or incorrect battery installation. | Gantikan bateri dengan bateri alkali AA baharu, memastikan kekutuban yang betul. |
| Temperature/Humidity shows "LL" or "HH". | Environmental conditions outside the measurable range. | This is normal. The clock will display readings once conditions return within the range (-10°C to 50°C for temp, 10% to 99% for humidity). |
| Penggera tidak berbunyi. | Penggera tidak diaktifkan atau ditetapkan dengan tidak betul. | Ensure the alarm is turned ON (alarm icon visible). Verify the alarm time is set correctly. |
| Day of the week is incorrect. | Year or date is set incorrectly. | Re-enter the correct Year, Month, and Date. The day of the week is calculated automatically. |
| Screen is too dark to read without backlight. | This is a characteristic of the LCD panel. | Press the SNOOZE/LIGHT button for temporary illumination. Ensure adequate ambient lighting for continuous viewing without backlight. |
7. Spesifikasi
- model: K0337STHW
- Dimensi: L 145mm * H 62mm * W 44mm (5.7 in * 2.4 in * 1.7 in)
- Berat Bersih: 165g (0.36 lbs)
- Sumber Kuasa: 2 x AA Alkaline Batteries (3.0V total)
- Julat Suhu: -10°C hingga 50°C (14°F hingga 122°F)
- Julat Kelembapan: 10% RH - 99% RH
- Jenis Paparan: LCD Digital
- warna: putih
Rajah 4: Dimensi Produk
This image provides a detailed diagram of the KADAMS digital alarm clock with its precise measurements. It shows the length as 145 mm (5.7 inches) and the height as 62 mm (2.4 inches).
8. Waranti dan Sokongan
Specific warranty information and direct customer support contact details are not provided within this manual. For warranty claims, technical assistance, or further inquiries, please refer to the official KADAMS website or contact the retailer from whom you purchased the product.
You may also visit the KADAMS Store on Amazon for more information: KADAMS Amazon Store
