Manual Pengguna Pengawal Solar POWERTECH MP3752 12V/24V 20A

1. Pengenalan

The POWERTECH MP3752 is an intelligent and lightweight solar charge controller designed to manage the power flow from your solar panels to your battery bank. Utilizing Pulse Width Modulation (PWM) technology, it ensures efficient and safe battery charging. This controller offers a set-and-forget operation, providing maximum charge into your batteries without constant monitoring. It integrates essential safety features such as overload, short-circuit, over-discharge, and reverse-polarity protection. Additionally, a convenient USB port on the front panel allows for up to 1.2A charging, useful for mobile devices during power outages. The unit supports various battery types including sealed lead-acid, Gel, and flooded cells, and automatically selects the optimal charging mode (bulk, equalise, float).

2. Maklumat Keselamatan

Please read all instructions carefully before installation and operation. Failure to follow these instructions may result in damage to the unit, battery, or personal injury.

• Ensure all connections are correct and secure before applying power.
• Do not connect the solar controller to an AC power source.
• Pasang pengawal di kawasan yang mempunyai pengudaraan yang baik, jauh daripada bahan mudah terbakar dan cahaya matahari langsung.
• Avoid short-circuiting the battery terminals or solar panel terminals.
• Always connect the battery first, then the solar panel, and finally the load. Disconnect in reverse order.
• This device is not waterproof; protect it from moisture and water.
• Hanya kakitangan yang berkelayakan harus melakukan pemasangan dan penyelenggaraan.

3. Ciri-ciri Produk

• Automatic charge mode selection (Bulk, Equalise, Float).
• Suitable for both 12V and 24V battery banks.
• Integrated USB charging port (5V, 1.2A max) on the front panel.
• Supports sealed lead-acid, Gel, and flooded battery types.
• Comprehensive protection features: overload, short-circuit, over-discharge, reverse-polarity.
• Pulse Width Modulation (PWM) charging technology.

4. Kandungan Pakej

Sila semak kandungan pakej selepas menerima:

• 1 x POWERTECH MP3752 Solar Controller
• 1 x Manual Pengguna (dokumen ini)

5. Produk Lebihview dan Sambungan

Rajah 1: Depan view of the POWERTECH MP3752 Solar Controller. This image displays the PV LOAD, UVW, LVD, Load ON, Over Load, Short-Circuit indicators, the USB port, and the connection terminals for solar panels, battery, and load.

The MP3752 controller features clearly marked terminals for easy connection. Refer to Figure 1 for a visual guide to the controller's layout and indicators.

Terminal Sambungan:

• Solar Panel Input (PV): Connect your solar panel array here. Ensure correct polarity (+ and -).
• Sambungan Bateri: Connect your 12V or 24V battery bank here. Observe correct polarity (+ and -).
• Muatkan Output: Connect your DC loads (e.g., lights, fans) here. Observe correct polarity (+ and -).
• Port USB: 5V, 1.2A max output for charging small electronic devices.

6. Persediaan dan Pemasangan

Ikuti langkah-langkah ini untuk pemasangan pengawal cas solar anda dengan betul:

1. Pemasangan: Choose a dry, well-ventilated indoor location, away from direct sunlight, high temperatures, and moisture. Ensure sufficient air circulation around the controller.
2. Sambungan Bateri:
   • Connect the positive (+) terminal of the battery to the battery positive (+) terminal on the controller.
   • Connect the negative (-) terminal of the battery to the battery negative (-) terminal on the controller.
   • The controller will automatically detect if it's a 12V or 24V system.
3. Sambungan Panel Suria:
   • Connect the positive (+) terminal of the solar panel to the solar panel positive (+) terminal on the controller.
   • Connect the negative (-) terminal of the solar panel to the solar panel negative (-) terminal on the controller.
   • Ensure the open-circuit voltage of the solar panel does not exceed the maximum input voltage of the controller (typically 50V for 12/24V systems).
4. Muatkan Sambungan:
   • Connect the positive (+) terminal of your DC load to the load positive (+) terminal on the controller.
   • Connect the negative (-) terminal of your DC load to the load negative (-) terminal on the controller.
   • Do not exceed the maximum rated current for the load output (20A).
5. Sahkan Sambungan: Double-check all connections for correct polarity and tightness before proceeding.

Figure 2: The POWERTECH MP3752 Solar Controller shown in its packaging, illustrating its application with solar panels. This image provides a contextual view of the product's intended use.

7. Arahan Operasi

7.1. Automatic System Voltage Pengiktirafan

The controller automatically detects whether the connected battery bank is 12V or 24V upon initial connection. Ensure the battery is connected first for proper voltagpengesanan e.

7.2. Mod Pengecasan

The MP3752 employs intelligent PWM charging, automatically cycling through different stages to optimize battery health and lifespan:

• Caj Pukal: Menghantar arus maksimum untuk mengecas bateri dengan cepat sehingga kira-kira 80%.
• Equalise Charge: Periodically applies a higher voltage to equalize the charge among battery cells, preventing sulfation and extending battery life (for flooded batteries).
• Caj Terapung: Maintains the battery at a full charge by providing a small, constant voltage, compensating for self-discharge.

7.3. Kawalan Beban

The load output is controlled by the controller to prevent over-discharge of the battery. When the battery voltage jatuh di bawah Vol Rendahtage Disconnect (LVD) threshold, the load output will be automatically disconnected. It will reconnect once the battery has recharged to the Low Voltage Reconnect (LVR) threshold.

Press the power button on the controller to manually turn the load output ON or OFF.

7.4. Port Pengecasan USB

The 5V, 1.2A USB port can be used to charge small electronic devices like smartphones or tablets. This port is active as long as the battery has sufficient charge.

8. Petunjuk

The POWERTECH MP3752 features several LED indicators to provide real-time status information:

• PV LOAD (Solar Panel Indicator):
  • hijau: Solar panel is connected and generating power.
  • Mati: No solar input or insufficient light.
• Penunjuk Pengecasan:
  • hijau: Bateri sedang dicas.
  • Mati: Battery is fully charged or not charging.
• Overvoltage Penunjuk:
  • merah: Masukan voltage from solar panel is too high, or battery voltage is overcharge protection level.
• UVW (Battery Voltage Indicator): Multiple LEDs indicating battery charge level.
• LVD (Jiltage Disconnect Indicator):
  • merah: Bateri voltage is low, load output has been disconnected.
• Load ON Indicator:
  • hijau: Load output is active.
• Over Load Indicator:
  • merah: Load current exceeds the maximum rated current. Load output may be temporarily disconnected.
• Short-Circuit Indicator:
  • merah: Short-circuit detected on the load output. Load output will be disconnected.

9. Penyelenggaraan

To ensure optimal performance and longevity of your solar charge controller, regular maintenance is recommended:

• Pembersihan: Periodically clean the exterior of the controller with a dry, soft cloth. Do not use solvents or abrasive cleaners.
• Sambungan: Annually check all wiring connections for tightness and corrosion. Loose connections can cause overheating and poor performance.
• Pengudaraan: Ensure that the ventilation openings are not blocked and that there is adequate airflow around the unit.
• Pemeriksaan: Inspect the controller for any signs of physical damage, discoloration, or unusual odors.

10. Penyelesaian masalah

11. Spesifikasi

12. Waranti dan Sokongan

This product is covered by a standard manufacturer's warranty against defects in materials and workmanship. Please refer to your purchase documentation for specific warranty terms and duration. For technical support, troubleshooting assistance, or warranty claims, please contact your retailer or the manufacturer directly.

Nota: Pembongkaran atau pengubahsuaian produk tanpa kebenaran akan membatalkan jaminan.