pengenalan
This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your Primo Black Stainless Steel 3 Spout Bottom Load Cold, Cool and Hot Water Cooler Dispenser. Please read this manual thoroughly before using the appliance and retain it for future reference.
Image: The Primo Black Stainless Steel Water Dispenser, showing its sleek design and the bottom-loading compartment with a water bottle inside.
Maklumat Keselamatan
Sentiasa patuhi langkah berjaga-jaga keselamatan berikut untuk mengurangkan risiko kebakaran, kejutan elektrik atau kecederaan.
- Keselamatan Elektrik: Ensure the dispenser is plugged into a grounded outlet. Do not use extension cords. Disconnect power before cleaning or servicing.
- Keselamatan Air Panas: The hot water dispenser reaches high temperatures. Use caution when dispensing hot water. The unit is equipped with a child safety lock for the hot water spout.
- penempatan: Place the dispenser on a firm, level surface. Keep it away from direct sunlight and heat sources. Ensure adequate ventilation around the unit.
- Botol air: Use only 3 or 5-gallon water bottles designed for water dispensers. Do not operate the dispenser without a water bottle installed.
- Pembersihan: Do not immerse the dispenser in water. Clean only with a damp cloth as instructed in the maintenance section.
Persediaan
- Membongkar: Keluarkan dispenser daripada pembungkusannya dengan berhati-hati. Periksa sebarang kerosakan.
- penempatan: Position the dispenser upright on a flat, stable surface. Allow at least 4 inches of clearance from walls for proper ventilation.
- Loading Water Bottle:
- Open the bottom door of the dispenser.
- Remove the cap from a new 3 or 5-gallon water bottle.
- Insert the probe into the bottle opening.
- Masukkan botol ke dalam kabinet dan tutup pintu.
Image: A user demonstrates the easy bottom-loading process for the water bottle.
- Siram Awal: Before first use, dispense and discard at least 1 liter of water from each spout (cold, cool, hot) to flush the system.
- Sambungan Kuasa: Plug the power cord into a grounded electrical outlet. The indicator lights will illuminate. Allow approximately 1 hour for the water to reach optimal temperatures.
Arahan Operasi
Your Primo water dispenser offers three temperature options: ice-cold, cool, and piping-hot water.
- Mengeluarkan Air Sejuk: Place your cup under the cold water spout (typically blue indicator). Press the cold water button to dispense. The water cools to approximately 39.2 degrees Fahrenheit (4 degrees Celsius).
Image: Dispensing refreshing cold water into a glass.
- Dispensing Cool Water: Place your cup under the cool water spout (typically green indicator). Press the cool water button to dispense.
- Mengeluarkan Air Panas: Place your cup under the hot water spout (typically red indicator). To dispense hot water, first push the child safety lock button, then press the hot water button. The water heats to at least 188.5 degrees Fahrenheit (87 degrees Celsius).
Image: Preparing a hot beverage by dispensing hot water into a mug.
- Pet Hydration: The dispenser can also be used to fill pet bowls with cool water.
Image: Conveniently filling a pet's water bowl directly from the dispenser.
Penyelenggaraan
Regular maintenance ensures optimal performance and longevity of your water dispenser.
- Membersihkan Bahagian Luar: Lap permukaan luar dengan lembut, damp kain. Jangan gunakan pembersih atau pelarut yang melelas.
- Membersihkan Dulang Titisan: The stainless steel drip tray is removable and dishwasher-safe. Empty and clean it regularly to prevent overflow and bacterial growth.
- Mengurangkan: Over time, mineral deposits may accumulate. Consult the manufacturer's website or customer support for recommended descaling procedures.
- Menggantikan Botol Air: When the water bottle is empty, the indicator light will signal. Replace the bottle following the "Loading Water Bottle" steps in the Setup section.
Menyelesaikan masalah
If you encounter issues with your dispenser, refer to the following common problems and solutions.
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Tiada pendispensan air. | Water bottle empty or not properly seated. Power cord unplugged. | Replace water bottle. Ensure bottle probe is fully inserted. Check power connection. |
| Air tidak cukup panas/sejuk. | Not enough time for heating/cooling. Hot/cold switch off. | Allow 1-2 hours for initial temperature stabilization. Ensure hot/cold switches (if present, typically on back) are on. |
| Bunyi luar biasa semasa operasi. | Compressor noise (normal). Unit not level. Loose components. | A slight hum from the compressor is normal. Ensure the unit is on a level surface. Check for any loose parts. If noise is excessive, contact customer support. |
| Air bocor. | Water bottle cracked or improperly seated. Drip tray full. | Inspect water bottle for cracks. Re-seat the bottle. Empty the drip tray. |
Spesifikasi
| Ciri | Perincian |
|---|---|
| Jenama | Primo |
| Nombor Model | 601256-C |
| warna | Black Stainless Door |
| Dimensi Produk (L x W x H) | 30.99 x 36.07 x 104.14 cm (12.2 x 14.2 x 41 inci) |
| Berat Barang | 16.37 kg (36.1 lbs) |
| Kapasiti | 5 gallons (water bottle) |
| Kuasa/Wattage | 420 watt |
| bahan | Plastic (BPA-Free materials in contact with water) |
| Suhu Air Sejuk | Cools to 39.2°F (4°C) |
| Suhu Air Panas | Heats to at least 188.5°F (87°C) |
| Jenis Pemasangan | Dibotolkan |
| Akses Lokasi | Beban Bawah |
Waranti dan Sokongan
For detailed warranty information, please refer to the documentation included with your purchase or visit the official Primo Water Corporation website. For customer support, technical assistance, or to inquire about replacement parts, please contact Primo customer service directly.
Pengeluar: Perbadanan Air Primo
Webtapak: www.primowater.com (Sila semak untuk serantau weblaman web untuk sokongan khusus)
