1. Pengenalan
The PROEL V10PLUS is a high-performance, bi-amplified 2-way monitor speaker designed for professional audio applications. It integrates a powerful 600W Class D + AB amplifier with Switch-Mode Power Supply (SMPS) technology, ensuring efficient and clear sound reproduction. Its lightweight, reinforced polypropylene cabinet and ergonomic handle provide excellent portability, while its trapezoidal shape allows for versatile use as a stage monitor or for fixed installations.
2. Ciri-ciri Utama
- bi-amplified 2-way design: Features a 1-inch neodymium compression driver and a 10-inch woofer with a 2-inch voice coil.
- Berkuasa Amppemberitahuan: 600W total power (Class D + AB amplifier with SMPS).
- Integrated Active Processor: Includes a dual LIMITER circuit for undistorted sound even at high levels.
- Input Serbaguna: MIC/LINE input with two-band EQ for flexible audio source connection.
- Petunjuk Status: Front LED for power (ON) and signal/clip indication.
- Output Tinggi: Maximum SPL of 123dB.
- Respons Frekuensi Luas: 60Hz - 20kHz.
- Reka Bentuk Tahan Lama dan Mudah Alih: Ultralight reinforced polypropylene cabinet with a comfortable carry handle.
- Peletakan Fleksibel: Trapezoidal shape for use as a stage monitor and four M10 suspension points for installation.
- Padat dan Ringan: Product dimensions of 25 x 35 x 30 cm and a total weight of 10 kg.
3. Persediaan
Proper setup ensures optimal performance and longevity of your PROEL V10PLUS speaker. Follow these steps for initial configuration:
3.1 Membongkar dan Pemeriksaan
Carefully remove the speaker from its packaging. Inspect the unit for any signs of damage that may have occurred during transit. Retain the original packaging for future transport or storage.
3.2 Penempatan
The V10PLUS is designed for various applications:
- Pemantau Lantai: Position the speaker on the floor using its angled profile untuk stage pemantauan.
- Tempat Pembesar Suara: Utilize the integrated pole mount socket on the bottom of the speaker to mount it on a standard speaker stand.
- Penggantungan: Use the four M10 suspension points for fixed installations. Ensure proper rigging hardware and safety procedures are followed by qualified personnel.
Figure 3.2.1: PROEL V10PLUS in stage monitor position.
3.3 Sambungan
Refer to the rear panel image for connection points.
Rajah 3.3.1: Sambungan dan kawalan panel belakang.
- Sambungan Kuasa: Connect the supplied AC power cable to the POWER input on the rear panel and then to a suitable electrical outlet. Ensure the voltage matches the speaker's requirements (220-240V~ 50/60Hz).
- Input Audio: Connect your audio source (mixer, microphone, instrument) to the INPUT section. The V10PLUS features a combo XLR/TRS input.
- For microphone signals, use the MIC/LINE switch to select 'MIC'.
- For line-level signals (e.g., from a mixer), select 'LINE'.
- Output Pautan: The LINK output (XLR) allows you to send the input signal to another V10PLUS speaker or another audio device.
4. Arahan Operasi
Once connected, follow these steps to operate your PROEL V10PLUS speaker:
- Hidupkan kuasa: Ensure all connections are secure and the LEVEL knob is set to minimum. Flip the POWER switch to the 'ON' position. The front LED will illuminate to indicate power.
- Pemilihan Input: Set the MIC/LINE switch according to your input source (MIC for microphones, LINE for line-level devices).
- Pelarasan Kelantangan: Slowly increase the LEVEL knob to achieve the desired volume. Monitor the front LED: it should primarily show 'SIGNAL' (green). If it frequently shows 'CLIP' (red), reduce the input level from your source or the speaker's LEVEL knob to prevent distortion.
- Kawalan Nada: Use the HIGH and LOW EQ knobs to adjust the treble and bass frequencies to suit your preference or acoustic environment.
- Matikan: Before disconnecting power or cables, turn the LEVEL knob to minimum and then flip the POWER switch to 'OFF'.
5. Penyelenggaraan
Regular maintenance helps preserve the performance and appearance of your speaker.
- Pembersihan: Use a soft, dry cloth to clean the cabinet. For stubborn dirt, a slightly damp cloth with mild soap can be used, followed by a dry cloth. Do not use abrasive cleaners, solvents, or waxes.
- Pembersihan gril: The metal grille can be gently cleaned with a soft brush or vacuum cleaner to remove dust.
- Storan: When not in use for extended periods, store the speaker in a dry, cool place, ideally in its original packaging or a protective cover, away from direct sunlight and extreme temperatures.
- Pemeriksaan Kabel: Periodically check all power and audio cables for any signs of wear, cuts, or damage. Replace damaged cables immediately.
Caution: Do not attempt to open the speaker cabinet. There are no user-serviceable parts inside. Refer all servicing to qualified service personnel.
6. Penyelesaian masalah
This section addresses common issues you might encounter with your PROEL V10PLUS speaker.
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Tiada Kuasa | Power cable disconnected; Power switch OFF; No power from outlet. | Ensure power cable is securely connected. Turn POWER switch ON. Test outlet with another device. |
| Tiada Bunyi | Input cable disconnected/faulty; LEVEL knob at minimum; Incorrect MIC/LINE selection; Source device muted/off. | Check input cable connections. Increase LEVEL knob. Verify MIC/LINE switch setting. Ensure audio source is active and sending signal. |
| Bunyi Herot | Input signal too high (clipping); LEVEL knob too high; Faulty cable. | Reduce input gain from source. Reduce speaker's LEVEL knob (if CLIP LED is active). Try a different input cable. |
| Bunyi Dengungan/Berdengung | Gelung pembumian; Kabel rosak; Gangguan daripada elektronik lain. | Ensure all equipment is on the same electrical circuit. Try different cables. Move speaker away from other electronic devices. |
If the problem persists after trying these solutions, please contact PROEL customer support or an authorized service center.
7. Spesifikasi
Detailed technical specifications for the PROEL V10PLUS speaker:
| Ciri | Spesifikasi |
|---|---|
| Nombor Model | V10PLUS |
| Pengeluar | PROEL |
| Jenis Pembesar Suara | 2 hala Bi-amplified Monitor Speaker |
| Kuasa Output Maks | 600 Watt |
| Respons Kekerapan | 60Hz - 20kHz |
| Teknologi Ketersambungan | berwayar |
| Mod Keluaran Audio | Stereo |
| Dimensi Produk (L x W x H) | 25 x 35 x 30 cm |
| Berat Barang | 10 Kilogram |
| warna | Hitam |
| bahan | Plastik, Aluminium |
| Permohonan yang Disyorkan | Muzik |
| Peranti Serasi | Television, Tablet, Personal computer, Smartphone |
| Konfigurasi Bunyi Sekeliling | 2.0 |
| Kalis air | Tidak |
| Jenis Pemasangan | Wall Mount (also supports suspension via M10 points and floor monitor use) |
| Ciri Khas | dua hala dua-amplifier 600 W class D + AB with SMPS |
8. Waranti dan Sokongan
8.1 Maklumat Waranti
This PROEL V10PLUS speaker comes with an extended warranty. For detailed information regarding warranty terms, conditions, and registration, please refer to the official PROEL webtapak atau hubungi pengedar sah anda. Simpan bukti pembelian anda untuk tuntutan waranti.
8.2 Sokongan Pelanggan
For technical assistance, service, or spare parts, please contact PROEL customer support. You can find contact information and additional resources, including FAQs and product documentation, on the official PROEL webtapak (www.proel.com). Please have your product model number (V10PLUS) and serial number ready when contacting support.
